[Are Higher Prices for Larger Femoral Heads in Total Hip Arthroplasty Justified from the Perspective of Health Care Economics? An Analysis of Costs and Effects in Germany]. / Sind höhere Preise für größere Kopfdurchmesser in der Hüftendoprothetik medizinökonomisch vertretbar? Eine Analyse der Kosten und Effekte in Deutschland.

Background: In total hip arthroplasty (THA), femoral head diameter has not been regarded as a key parameter which should be restored when reconstructing joint biomechanics and geometry. Apart from the controversial discussion on the advantages and disadvantages of using larger diameter heads, their higher cost is another important reason that they have only been used to a limited extent. The goal of this study was to analyse the price structure of prosthetic heads in comparison to other components used in THA. A large group of patients with hip endoprostheses were evaluated with respect to the implanted socket diameter and thus the theoretically attainable head diameter. Materials and Methods: The relative prices of various THA components (cups, inserts, stems and ball heads) distributed by two leading German manufacturers were determined and analysed. Special attention was paid to different sizes and varieties in a series of components. A large patient population treated with THA was evaluated with respect to the implanted cup diameter and therefore the theoretically attainable head diameter. Results: The pricing analysis of the THA components of two manufacturers showed identical prices for cups, inserts and stems in a series. In contrast to this, the prices for prosthetic heads with a diameter of 36-44 mm were 11-50 % higher than for 28 mm heads. Identical prices for larger heads were the exception. The distribution of the head diameter in 2719 THA cases showed significant differences between the actually implanted and the theoretically attainable heads. Conclusion: There are proven advantages in using larger diameter ball heads in THA and the remaining problems can be solved. It is therefore desirable to correct the current pricing practice of charging higher prices for larger components. Instead, identical prices should be charged for all head diameters in a series, as is currently established practice for all other THA components. Thus when reconstructing biomechanics and joint geometry in THA, it should be possible to recover not only leg length, femoral offset and antetorsion of the femoral neck, but also to approximately restore the diameter of the femoral head and thereby optimise the functional outcome.

A pilot trial comparing the tear-out behavior in screw-sockets and cemented polyethylene acetabular components - a cadaveric study.

BACKGROUND: The removal of well-fixed acetabular components following THA (total hip arthroplasty) is a difficult operation and could be accompanied by the loss of acetabular bone stock. The optimal method for fixation is still under debate. The aim of this pilot study was to compare the tear-out resistance and failure behavior between osseo-integrated and non-integrated screw cups. Furthermore, we examined whether there are differences in the properties mentioned between screw sockets and cemented polyethylene cups. HYPOTHESIS: Tear-out resistance and related mechanical work required for the tear-out of osseo-integrated screw sockets are higher than in non-integrated screw sockets. PATIENTS AND METHODS: Ten human coxal bones from six cadavers with osseo-integrated screw sockets (n=4), non-integrated (implanted post-mortem, n=3) screw sockets and cemented polyethylene cups (n=3) were used for tear-out testing. The parameters axial failure load and mechanical work for tear-out were introduced as measures for determining the stability of acetabular components following THA. RESULTS: The osseo-integrated screw sockets yielded slightly higher tear-out resistance (1.61±0.26kN) and related mechanical work compared to the non-integrated screw sockets (1.23±0.39kN, P=0.4). The cemented polyethylene cups yielded the lowest tear-out resistance with a failure load of 1.18±0.24kN. Compared to the screw cups implanted while alive, they also differ on a non-significant level (P=0.1). Osseous failure patterns differed especially for the screw sockets compared to the cemented polyethylene cups. DISCUSSION: Osseo-integration did not greatly influence the tear-out stability in cementless screw sockets following axial loading. Furthermore, the strength of the bone-implant-interface of cementless screw sockets appears to be similar to cemented polyethylene cups. However, given the high failure load, high mechanical load and because of the related bone failure patterns, removal should not be performed by means of tear-out but rather by osteotomes or other curved cutting devices to preserve the acetabular bone stock. LEVEL OF EVIDENCE: Level III, case-control-study.

[Larger heads compensate for an increased risk of THA dislocation in high-risk patients]. / Größere Köpfe kompensieren erhöhte Hüft-TEP-Luxationsgefahr bei Hochrisikopatienten.

BACKGROUND: Dislocation is a devastating complication after total hip arthroplasty (THA) and occurs in 2-5% of primary THA cases and 5-10% of revision THA cases. Assuming correct implantation, dislocation risk can be reduced primarily by capsular repair and the use of larger prosthetic heads. However, larger heads are also associated with risks like accelerated wear or implant loosening, which is why heads with a maximum diameter of 36 mm are currently standard in primary THA. In cases with high dislocation risk, the use of 40 mm and 44 mm heads should be considered. OBJECTIVES: This study aimed to quantify THA dislocation risk and retrospectively analyze the course of disease in high-risk patients treated with 40 mm or 44 mm femoral heads after primary or revision THA, concerning dislocation and other complications suffered. MATERIALS AND METHODS: All patients with increased THA dislocation risk, treated from 2009-2014, were evaluated regarding dislocations. The cases with installation of 40 mm or 44 mm prosthetic heads were classified using a self-developed 5-level risk score and retrospectively analyzed. RESULTS: During the observation period, 288 THA interventions with increased dislocation risk were performed. In 278 cases with ball diameters ≤ 36 mm the dislocation rate was 15.1% (n=42). In 10 high dislocation-risk cases (3A to 4B according to recommended scoring system), 40 mm and 44 mm heads were used. After a 22.8 month mean follow-up, no THA dislocations were reported. CONCLUSION: Our results with 40 and 44 mm heads and the existing literature confirm much higher joint stability and, thus, significantly reduced dislocation risk with larger prosthetic heads in THA. Their use is, therefore, justified in high-risk patients and should be considered in future THA.

Doppler sonographic pulse curve analysis for estimation of the haemodynamic function.

Experience with Doppler sonographic pulse curve analysis is given from 40 glaucoma patients (examination of the temporal posterior ciliary artery), and from premature babies (blood flow in the anterior cerebral artery). In the latter group the reaction to pain and stress connected with blood sampling was studied. In the glaucoma patients focus was on the influence of IOP level on vascular autoregulation, and the possible response to therapy with beta-blockers. Describing an averaging technique, methodological problems are discussed as relevant for the detection of changes in flow and velocity in small blood vessels.

[Value and importance of treatment with OTC in selected patients with marginal periodontitis]. / Wert und Bedeutung einer OTC-Behandlung von ausgewählten marginalen Periodontitisformen.

Over a period of 14 days we have treated 27 after special criterious selected patients with 250 mg OTC three times/day. We compared these results with those of 25 patients--of a placebo-group. The analysis included clinical and microbiological parameters. It could be pointed out, that the OTC-therapy results in a significant improvement of the examined parameters stile 6 months after starting with the therapy.