The Electron-Rich and Nucleophilic N-Heterocyclic Imines on Metal Surfaces: Binding Modes and Interfacial Charge Transfer.

The strongly electron-donating N-heterocyclic imines (NHIs) have been employed as excellent surface anchors for the thermodynamic stabilization of electron-deficient species due to their enhanced nucleophilicity. However, the binding mode and interfacial property of these new ligands are still unclear, representing a bottleneck for advanced applications in surface functionalization and catalysis. Here, NHIs with different side groups have been rationally designed, synthesized, and analyzed on various metal surfaces (Cu, Ag). Our results reveal different binding modes depending on the molecular structure and metal surface. The molecular design enables us to achieve a flat-lying or upright configuration and even a transition between these two binding modes depending on the coverage and time. Importantly, the two binding modes exhibit different degrees of interfacial charge transfer between the molecule and the surface. This study provides essential microscopic insight into the NHI adsorption geometry and interfacial charge transfer for the optimization of heterogeneous catalysts in coordination chemistry.

On-surface synthesis of ballbot-type N-heterocyclic carbene polymers.

N-Heterocyclic carbenes (NHCs) are established ligands for metal complexes and surfaces. Here we go beyond monomeric NHCs and report on the synthesis of NHC polymers on gold surfaces, consisting of ballbot-type repeating units bound to single Au adatoms. We designed, synthesized and deposited precursors containing different halogens on gold surfaces under ultrahigh vacuum. Conformational, electronic and charge transport properties were assessed by combining low-temperature scanning tunneling microscopy, non-contact atomic force microscopy, X-ray photoelectron spectroscopy, first-principles calculations and reactive force field simulations. The confirmed ballbot-type nature of the NHCs explains the high surface mobility of the incommensurate NHC polymers, which is prerequisite for their desired spatial alignment. The delicate balance between mobility and polymerization rate allows essential parameters for controlling polymer directionality to be derived. These polymers open up new opportunities in the fields of nanoelectronics, surface functionalization and catalysis.

Defect pairing in Fe-doped SnS van der Waals crystals: a photoemission and scanning tunneling microscopy study.

We investigate the effect of low concentrations of iron on the physical properties of SnS van der Waals crystals grown from the melt. By means of scanning tunneling microscopy (STM) and photoemission spectroscopy we study Fe-induced defects and observe an electron doping effect in the band structure of the native p-type SnS semiconductor. Atomically resolved and bias dependent STM data of characteristic defects are compared to ab initio density functional theory simulations of vacancy (VS and VSn), Fe substitutional (FeSn), and Fe interstitial (Feint) defects. While native SnS is dominated by acceptor-like VSn vacancies, our results show that Fe preferentially occupies donor-like interstitial Feint sites in close proximity to VSn defects along the high-symmetry c-axis of SnS. The formation of such well-defined coupled (VSn, Feint) defect pairs leads to local compensation of the acceptor-like character of VSn, which is in line with a reduction of p-type carrier concentrations observed in our Hall transport measurements.

Understanding the formation of surface relief gratings in azopolymers: A combined molecular dynamics and experimental study.

The formation of surface relief gratings in thin azopolymeric films is investigated using atomistic molecular dynamics simulations and compared to experimental results for the specific case of poly-disperse-orange3-methyl-methacrylate. For this purpose, the film is illuminated with a light pattern of alternating bright and dark stripes in both cases. The simulations use a molecular mechanics switching potential to explicitly describe the photoisomerization dynamics between the E and Z isomers of the azo-units and take into account the orientation of the transition dipole moment with respect to the light polarization. Local heating and elevation of the illuminated regions with the subsequent movement of molecules into the neighboring dark regions are observed. This leads to the formation of valleys in the bright areas after re-cooling and is independent of the polarization direction. To verify these observations experimentally, the azopolymer film is illuminated with bright stripes of varying width using a spatial light modulator. Atomic force microscopy images confirm that the elevated areas correspond to the previously dark areas. In the experiment, the polarization of the incident light makes only a small difference since tiny grain-like structures form in the valleys only when the polarization is parallel to the stripes.

Real-Space Identification of Non-Noble Single Atomic Catalytic Sites within Metal-Coordinated Supramolecular Networks.

With regard to the development of single atom catalysts (SACs), non-noble metal-organic layers combine a large functional variability with cost efficiency. Here, we characterize reacted layers of melamine and melem molecules on a Cu(111) surface by noncontact atomic force microscopy (nc-AFM), X-ray photoelectron spectroscopy (XPS) and ab initio simulations. Upon deposition on the substrate and subsequent heat treatments in ultrahigh vacuum (UHV), these precursors undergo a stepwise dehydrogenation. After full dehydrogenation of the amino groups, the molecular units lie flat and are strongly chemisorbed on the copper substrate. We observe a particularly extreme interaction of the dehydrogenated nitrogen atoms with single copper atoms located at intermolecular sites. In agreement with the nc-AFM measurements performed with an O-terminated copper tip on these triazine- and heptazine-based copper nitride structures, our ab initio simulations confirm a pronounced interaction of oxygen species at these N-Cu-N sites. To investigate the related functional properties of our samples regarding the oxygen reduction reaction (ORR), we developed an electrochemical setup for cyclic voltammetry experiments performed at ambient pressure within a drop of electrolyte in a controlled O2 or N2 environment. Both copper nitride structures show a robust activity in irreversibly catalyzing the reduction of oxygen. The activity is assigned to the intermolecular N-Cu-N sites of the triazine- and heptazine-based copper nitrides or corresponding oxygenated versions (N-CuO-N, N-CuO2-N). By combining nc-AFM characterization on the atomic scale with a direct electrochemical proof of performance, our work provides fundamental insights about active sites in a technologically highly relevant reaction.

Surface Passivation and Detrimental Heat-Induced Diffusion Effects in RbF-Treated Cu(In,Ga)Se2 Solar Cell Absorbers.

Alkali postdeposition treatments of Cu(In,Ga)Se2 absorbers with KF, RbF, and CsF have led to remarkable efficiency improvements for chalcopyrite thin film solar cells. However, the effect of such treatments on the electronic properties and defect physics of the chalcopyrite absorber surfaces are not yet fully understood. In this work, we use scanning tunneling spectroscopy and X-ray photoelectron spectroscopy to compare the surface defect electronic properties and chemical composition of RbF-treated and nontreated absorbers. We find that the RbF treatment is effective in passivating electronic defect levels at the surface by preventing surface oxidation. Our X-ray photoelectron spectroscopy (XPS) data points to the presence of chemisorbed Rb on the surface with a bonding configuration similar to that of a RbInSe2 bulk compound. Yet, a quantitative analysis indicates Rb coverage in the submonolayer regime, which is likely causing the surface passivation. Furthermore, ab initio calculations confirm that RbF-treated surfaces are less prone to oxidation (in the form of Ga, In, and Se oxides) than bare chalcopyrite surfaces. In addition, elemental diffusion of Rb along with Na, Cu, and Ga is found to occur when the samples are annealed under ultrahigh vacuum conditions. Magnetic sector secondary ion mass spectrometry measurements indicate that there is a homogeneous spatial distribution of Rb on the surface both before and after annealing, albeit with an increased concentration at the surface after heat treatment. Depth-resolved magnetic sector secondary ion mass spectrometry measurements show that Rb diffusion within the bulk occurs predominantly along grain boundaries. Scanning tunneling and XPS measurements after subsequent annealing steps demonstrate that the Rb accumulation at the surface leads to the formation of metallic Rb phases, involving a significant increase of electronic defect levels and/or surface dipole formation. These results strongly suggest a deterioration of the absorber-window interface because of increased recombination losses after the heat-induced diffusion of Rb toward the interface.

Reversible Self-Assembly of an N-Heterocyclic Carbene on Metal Surfaces.

Self-assembly of cyclohexyl cyclic (alkyl)(amino)carbenes (cyCAAC) can be realized and reversibly switched from a close-packed trimer phase to a chainlike dimer phase, enabled by the ring-flip of the cyclohexyl wingtip. Multiple methods including scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations identified a distinct isomer (axial or equatorial chair conformer) in each phase, and consequently support the conclusion regarding the determination of molecular surface geometry on the self-assembly of cyCAAC. Moreover, various substrates such as Ag (111) and Cu (111) are tested to elucidate the importance of cyCAAC-surface interactions on cyCAAC based nanopatterns. These investigations of patterned surfaces prompted a deep understanding of cyCAAC binding mode, surface geometry and reversible self-assembly, which are of paramount significance in the areas of catalysis, biosensor design and surface functionalization.

Benchmarking atomically defined AFM tips for chemical-selective imaging.

Controlling the identity of the tip-terminating atom or molecule in low-temperature atomic force microscopy has led to ground breaking progress in surface chemistry and nanotechnology. Lacking a comparative tip-performance assessment, a profound standardization in such experiments is highly desirable. Here we directly compare the imaging and force-spectroscopy capabilities of four atomically defined tips, namely Cu-, Xe-, CO-, and O-terminated Cu-tips (CuOx-tips). Using a nanostructured copper-oxide surface as benchmark system, we found that Cu-tips react with surface oxygen, while chemically inert Xe- and CO-tips allow entering the repulsive force regime enabling increased resolution. However, their high flexibility leads to imaging artifacts and their strong passivation suppresses the chemical contrast. The higher rigidity and selectively increased chemical reactivity of CuOx-tips prevent tip-bending artifacts and generate a distinct chemical contrast. This result is particularly promising in view of future studies on other metal-oxide surfaces.

Mechanical and Chemical Interactions in Atomically Defined Contacts.

Providing fundamental insights in atomic interactions, dedicated methods in atomic force microscopy allow measuring the threshold forces needed to move single adsorbed atoms or molecules. However, the chemical and structural properties of the probe-tip can drastically influence the results. Establishing atomically defined contacts in such experiments, the tips in the present study are functionalized with various chemically and structurally different terminations. Xenon atoms are moved along an atomically defined metal/metal-oxide boundary where all tips show a pulling mechanism and slight force variations, which are assigned to polarization effects within the tip-sample junction. Detaching Xe atoms from the boundary involves a significantly higher energy barrier where chemical reactive Cu-tips cause Xe pickup before any lateral manipulation. Passivating the tip by inert probe particles (Xe or CO) allows further approaching the surface Xe atom. Yet, the small vertical attraction and pronounced tip relaxations prevent reaching sufficient threshold forces inducing manipulation. In contrast, the high structural rigidity of oxygen-terminated Cu-tips allows manipulations even beyond the threshold where they evolve from initial pulling, via sliding to pushing mode. The detailed quantitative analysis of the processes in the atomically defined junctions emphasizes the mechanical and chemical interactions for highly controlled experiments with piconewton sensitivity.

Polymerization of silanes through dehydrogenative Si-Si bond formation on metal surfaces.

Element-element double bonds of group 14 elements can be formed in solution, but generally only by applying harsh reductive conditions using sterically highly shielded tetryl halides as precursors. The two-dimensional confinement in surface-assisted polymerization represents a valuable alternative to access such reactive compounds, as it allows shielding of the labile entities without requiring bulky residues and catalytic activation of the reactive groups. Here, we demonstrate Si-Si bond formation in on-surface chemistry. Polymerization upon multiple Si-H bond dissociation and subsequent Si-Si bond formation was achieved on Au(111) and Cu(111) surfaces by using two different monomers, each containing two silicon functional groups (CH3SiH2 or SiH3) attached to an aromatic backbone, leading to polymeric disilenes that interact with the surface. A combination of experimental and theoretical studies corroborates the formation of covalent Si-Si bonds between the long, highly ordered polymer chains with high diastereoselectivity. The reactive Si=Si bonds formally generated via double dehydrogenative coupling are stabilized via covalent Si-surface interaction.

Conformational evolution following the sequential molecular dehydrogenation of PMDI on a Cu(111) surface.

Molecular spatial conformational evolution following the corresponding chemical reaction pathway at surfaces is important to understand and optimize chemical processes. Combining experimental and theoretical methods, the sequential N-H and C-H dehydrogenation of pyromellitic diimide (PMDI) on a Cu(111) surface are reported. STM experiments and atomistic modeling allow structural analysis at each well-defined reaction step. First, exclusively the aromatic N-H dehydrogenation of the imide group is observed. Subsequently, the C-H group at the benzene core of PMDI gets activated leading to a dehydrogenation reaction forming metalorganic species where Cu adatoms pronouncedly protruding from the surface are coordinated by one or two PMDI ligands at the surface. All reactions of PMDI induce conformational changes at the surface as confirmed by STM imaging and DFT simulations. Such conformational evolution in sequential N-H and C-H activation provides a detailed insight to understand molecular dehydrogenation processes at surfaces.

Azo bond formation on metal surfaces.

The formation of azo compounds via redox cross-coupling of nitroarenes and arylamines, challenging in solution phase chemistry, is achieved by on-surface chemistry. Reaction products are analyzed with a cryogenic scanning tunneling microscope (STM) and X-ray photoelectron spectroscopy (XPS). By using well-designed precursors containing both an amino and a nitro functionality, azo polymers are prepared on surface via highly efficient nitro-amino cross-coupling. Experiments conducted on other substrates and surface orientations reveal that the metal surface has a significant effect on the reaction efficiency. The reaction was further found to proceed from partially oxidized/reduced precursors in dimerization reactions, shedding light on the mechanism that was studied by DFT calculations.

An Electron-Rich Cyclic (Alkyl)(Amino)Carbene on Au(111), Ag(111), and Cu(111) Surfaces.

The structural properties and binding motif of a strongly σ-electron-donating N-heterocyclic carbene have been investigated on different transition-metal surfaces. The examined cyclic (alkyl)(amino)carbene (CAAC) was found to be mobile on surfaces, and molecular islands with short-range order could be found at high coverage. A combination of scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations highlights how CAACs bind to the surface, which is of tremendous importance to gain an understanding of heterogeneous catalysts bearing CAACs as ligands.

High resolution noncontact atomic force microscopy imaging with oxygen-terminated copper tips at 78 K.

Functionalizing atomic force microscopy (AFM) tips by picking up single inert probe particles like CO or Xe from the surface drastically increase the resolution. In particular, this approach allows imaging organic molecules with submolecular resolution revealing their internal bonding structure. However, due to the weak coupling of these probe particles to both, the surface they are picked up from and the tip apex, these experiments require liquid helium temperatures (i.e.≈5 K). In the present study we demonstrate that functionalizing an AFM tip with an atomically defined O-terminated copper tip (CuOx tip) allows performing such experiments at liquid nitrogen temperatures (i.e.≈78 K) with outstanding quality. We show that it is possible to utilize CuOx tips for chemically selective imaging of a copper oxide nanodomain on a partially oxidized Cu(110) surface in the repulsive force regime at elevated temperatures. Moreover, the high structural and chemical stability of CuOx tips allow even ex situ investigations where these tips are used to perform experiments on other, non-Cu, non-oxidized, substrates. In particular, we present results obtained from a dicoronylene (DCLN) molecule with submolecular resolution. An analysis of inner and peripheral bond lengths of the DCLN molecule shows excellent agreement with theoretical gas phase simulations emphasizing the exceptional imaging properties of CuOx tips also at elevated temperatures.

From 3D to 2D: Structural, Spectroscopic and Theoretical Investigations of the Dimensionality Reduction in the [PtAl2 ]δ- Polyanions of the Isotypic MPtAl2 Series (M=Ca-Ba, Eu).

Four new MPtAl2 (M=Ca, Sr, Ba, Eu) compounds, adopting the orthorhombic MgCuAl2 -type structure, have been synthesized from the elements using tantalum ampoules. All compounds are obtained as platelet-shaped crystallites and exhibit an increasing moisture sensitivity with increasing size of the formal M cation. Structural investigations indicate a pronounced elongation of the crystallographic b-axis, which results in a significant distortion of the [PtAl2 ]δ- polyanion. Within the polyanion, layer-like arrangements can be found with bonding Pt-Al interactions within the slab; the increase of the b-axis can be attributed to increasing Al-Al distances and therefore decreasing interactions between the slabs, caused by the differently-sized formal M cations. While the alkaline earth (M=Ca, Sr) representatives exhibit Pauli paramagnetism, BaPtAl2 shows diamagnetic behavior, finally EuPtAl2 is ferromagnetic with TC =54.0(5) K. The effective magnetic moment indicates that the Eu atoms are in a divalent oxidation state, which is confirmed by 151 Eu Mössbauer spectroscopic investigations. Measurements below the Curie-temperature show a full magnetic hyperfine field splitting with Bhf =21.7(1) T. 27 Al and 195 Pt magic-angle spinning NMR spectroscopy corroborates the presence of single crystallographic sites for the Pt and Al atoms. The large 27 Al nuclear electric quadrupolar coupling constants confirm unusually strong electric field gradients, in agreement with the structural distortions and the respective theoretical calculations. X-ray photoelectron spectroscopy has been utilized to investigate the charge transfer within the polyanion. The Pt 4f binding energy decreases with decreasing electronegativity / ionization energy of the alkaline earth elements, suggesting an increasing electron density at the Pt atoms. Theoretical investigations underline the platinide character of the investigated compounds by Bader charge calculations. The analysis of the integrated crystal orbital Hamilton population (ICOHP) values, electron localization function (ELF) and isosurface analyses lead to a consistent structural picture, indicating stable layer-like arrangements of the [PtAl2 ]δ- polyanion.

Diamantane Suspended Single Copper Atoms.

Single chains of metal atoms are expected to be perfect one-dimensional nanowires in nanotechnology, due to their quantum nature including tunable electronic or spin coupling strengths. However, it is still rather difficult to fabricate such nanowires with metallic atoms under directional and separation control. Here, we succeeded in building higher-order single diamondoid-chains from the lower-order chains using a chemically well-controlled approach that employs diamondoids on metal surfaces. This approach results in higher-order diamondoid double chains by linking two neighboring single chains, and ultimately forms a central chain consisting of single Cu atoms suspended by the diamantane framework. The suspended Cu atoms are placed above the metal surface with a periodic distance of 0.67 ± 0.01 nm. Our bottom-up approach will allow detailed experimental investigations of the properties of these exciting suspended metal atoms (for example, quantized conductance, spin coupling, as well as transfer, etc.). Furthermore, we also identified different spatial configurations on the metal surfaces in on-surface reaction processes using high-resolution AFM imaging and density functional theory computations. Our findings broaden the on-surface synthesis concept from 2D planar aromatic molecules to 3D bulky aliphatic molecules.

Elucidating the Binding Modes of N-Heterocyclic Carbenes on a Gold Surface.

Tuning the binding mode of N-heterocyclic carbenes on metal surfaces is crucial for the development of new functional materials. To understand the impact of alkyl side groups on the formation of NHC species at the Au(111) surface, we combined scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory calculations. We reveal two significantly different binding modes depending on the alkyl chain length. In the case of a short alkyl substituent, an up-standing configuration with one Au adatom is preferred, whereas the longer alkyl groups result exclusively in NHC-Au-NHC complexes lying flat on the surface. Our study highlights how well-defined structural modifications of NHCs allow for controlling the local binding motif on surfaces, which is important to design designated catalytic sites at interfaces.

Copper-oxide tip functionalization for submolecular atomic force microscopy.

Establishing submolecular imaging in real-space by non-contact atomic force microscopy (NC-AFM) has been a major breakthrough in the field of organic surface chemistry. The key for the drastically increased resolution in these experiments is to functionalize a metallic tip apex with an inert probe particle. However, due to their weak bonding at the metal apex, these probe particles show a pronounced dynamic lateral deflection in the measurements. This constitutes a major limitation of this approach as it involves image distortions, an overestimation of bond lengths, and even artificial bond-like contrast features where actually no bonds exist. In this contribution, recent progress by using an alternative approach by copper-oxide tip functionalization is reviewed. Copper-oxide tips (CuOx tips) consist of a bulk copper apex, terminated by a covalently connected single oxygen atom, which chemically passivates the tip. Such CuOx tips can be identified by contrast analysis at specific surface sites and allow for submolecular resolution. A comparative analysis of data recorded with flexible tips allows a detailed discussion of the contrast mechanisms and related artificial effects. It is concluded with an assessment of limitations, future challenges and opportunities in such experiments.

Site-Specific Adsorption of Aromatic Molecules on a Metal/Metal Oxide Phase Boundary.

Nanostructured surfaces are ideal templates to control the self-assembly of molecular structures toward well-defined functional materials. To understand the initial adsorption process, we have investigated the arrangement and configuration of aromatic hydrocarbon molecules on nanostructured substrates composed of an alternating arrangement of Cu(110) and oxygen-reconstructed stripes. Scanning tunneling microscopy reveals a preferential adsorption of molecules at oxide phase boundaries. Noncontact atomic force microscopy experiments provide a detailed insight into the preferred adsorption site. By combining submolecular resolution imaging with density functional theory calculations, the interaction of the molecule with the phase boundary was elucidated excluding a classical hydrogen bonding. Instead, a complex balance of different interactions is revealed. Our results provide an atomistic picture for the driving forces of the adsorption process. This comprehensive understanding enables developing strategies for the bottom-up growth of functional molecular systems using nanotemplates.