Parametric investigation of static and dynamic cell culture conditions and their impact on hCMEC/D3 barrier properties.

In brain research, the hCMEC/D3 cell line is widely used for the establishment of a human in vitro blood-brain barrier (BBB) model. However, its barrier integrity seems to be insufficient for drug permeability studies, represented by rather low transendothelial electrical resistance (TEER) and high permeability of small molecules. Therefore, this study covers a parametric investigation of static and dynamic cell culture conditions to improve barrier functionality of hCMEC/D3. The effect of basal media was investigated by analyzing changes in proliferation rate, barrier integrity and gene expression of cellular junction proteins. The cells were able to grow in different cell culture media, including serum-free media. However, none of these media enhanced strongly the growth rate or barrier integrity compared to the microvascular endothelial cell growth medium-2 (EGM™-2 MV). Furthermore, hCMEC/D3 cells did not respond positively regarding TEER to any tested parameter neither supplements, coating materials nor co-cultures with the human immortalized astrocyte cell line SVGmm. Furthermore, the impact of dynamic conditions was examined by using the Dynamic Micro Tissue Engineering System (DynaMiTES). Cultivation conditions were successfully adapted to the DynaMiTES design and no negative effect was detected by analyzing cell viability and cell count, albeit TEER remained also unchanged. Consequently, the hCMEC/D3 model has considerable limitations and further improvements or alternative cell lines are required.

Anti-proliferative and anti-migratory effects of hyperforin in 2D and 3D artificial constructs of human dermal fibroblasts - A new option for hypertrophic scar treatment?

Hyperforin (HYP), one of the main bioactive compounds in extracts of Hypericum perforatum, is a potential drug candidate for the treatment of skin diseases. Since extracts have proven to support wound healing, in the present study effects of HYP on human dermal fibroblasts (HDF) were evaluated in 2D and 3D in vitro dermal constructs. Viability and cytotoxicity assays as well as a live-dead cell staining were performed to test at which concentration HYP reduces viability and/or shows cytotoxicity. Furthermore a differentiation between cytotoxic, anti-proliferative and anti-migratory effects was done. For the latter purpose a 2D migration assay was performed. HDF-induced contraction of a 3D artificial dermal (AD) construct was determined at given HYP concentration. Induction of apoptosis was examined by determination of caspase 3/7 activities. HYP reduced viability of HDF down to 70% at concentrations of 5-10µM. This decrease was not due to cytotoxicity but to a reduction in proliferation as shown from both the proliferation assay and the cytotoxicity assay as well as from live-dead cell staining. The 2D migration assay showed that HYP reduced migration activity of HDF cells at a concentration of 10µM. At this concentration HYP also reduced the HDF-induced contraction of collagen gels as 3D AD constructs. Apoptotic effects of HYP were excluded performing a caspase 3/7 activity detecting assay. The results show for the first time that HYP may be rather a potential candidate for treatment of hypertrophic scars than promoting effects which are understood as important in wound healing.

Stabilization of hyperforin dicyclohexylammonium salt with dissolved albumin and albumin nanoparticles for studying hyperforin effects on 2D cultivation of keratinocytes in vitro.

Due to the limited chemical stability of the natural hyperforin molecule, a more stable form of hyperforin, i.e., the hyperforin dicyclohexylammonium salt (HYP-DCHA) has been used for ex vivo and in vitro experiments in recent years, but its actual stability under typical cell culture conditions has never been studied before. In this contribution the stability of HYP-DCHA was examined under typical cell culture conditions. Different cell culture media with and without fetal calf serum (FCS) supplementation were studied with regard to further stabilization of HYP-DCHA determined with HPLC analysis. Furthermore, albumin nanoparticles were examined as a stabilizing carrier system for HYP-DCHA. In this context, the interaction between HYP-DCHA and albumin nanoparticles (ANP) was examined with regard to size and loading with HYP . The effects of HYP-DCHA either supplied in cell culture medium or loaded on ANP on viability and cytotoxicity were studied in vitro on HaCaT monolayers (human keratinocyte cell line). HYP-DCHA supplied in FCS-containing medium was recovered completely after 24h of incubation. However, a lack of FCS caused a total loss of HYP-DCHA after less than 24h incubation time. Supplying HYP-DCHA loaded on ANP in an FCS-free medium resulted in a recovery of about 60% after 24h incubation. HYP-DCHA supplied in medium along with FCS showed a slow dose-dependent decrease in viability of HaCaT cells without any cytotoxic effects (antiproliferative effect). Treatment with HYP-DCHA with a lack of FCS resulted in a significantly faster decrease in viability which was mainly due to cytotoxicity. The latter was true for HYP-DHCA-loaded ANP where increased cytotoxicity was observed despite the presence of FCS. The results show that the stability of the widely used HYP-DCHA is rather limited under cell culture conditions. Especially a lack of FCS leads to degradation and/or oxidation of HYP-DCHA probably causing an increased cytotoxicity. In contrast, FCS supplementation fairly stabilizes HYP-DCHA under cell culture conditions while albumin nanoparticles may serve the same stabilization purpose despite increasing cytotoxic effects onto the cells themselves.

Cellular uptake of coumarin-6 under microfluidic conditions into HCE-T cells from nanoscale formulations.

UNLABELLED: In vitro studies of ocular bioavailability of active pharmaceutical ingredients (API) from colloidal drug delivery systems do not consider physiological shear stress generated by eyelid wiping and tear flow. The present study introduces a live cell imaging approach which enables the investigation of model drug uptake from various formulations under shear stress by using custom-made microchannels for the cultivation of human corneal epithelial cells (HCE-T). Coumarin-6 (C-6) was used as a model API incorporated into solid lipid nanoparticles and liposomes, and as an aqueous crystalline suspension. Confocal laser scanning microscopy visualized C-6 uptake into HCE-T cells in a time-resolved manner with an applied shear stress of 0.1 Pa. Static conditions were also studied for comparative purposes. Additionally, solid lipid nanoparticles (SLN) were labeled with a fluorescent phospholipid to check whether C-6 uptake was associated with SLN incorporation into the cells. RESULTS: Intact SLN were not incorporated into the cells, i.e., C-6 was passively redistributed from SLN to lipophilic cellular compartments. C-6 was enriched up to a given limit in HCE-T cells within 5 min of contact with the dispersions both under static and under flow conditions. The C-6 delivery rate from liposomes was superior to that from SLN whereby the suspension exhibited the lowest rate. C-6 release rates were comparable for static and flow conditions. Alternate flushing with formulations and buffer revealed that cells accumulated C-6. The results suggest that combining microfluidics with live cell imaging provides a valuable option for in vitro studies of ocular drug delivery.

Physicochemical characterization of sildenafil-loaded solid lipid nanoparticle dispersions (SLN) for pulmonary application.

For the development of any colloidal system, thorough characterization is extremely essential. This article discusses the physicochemical characterization of sildenafil-loaded solid lipid nanoparticle dispersions (SLN) including stability analysis over 6 months time period for possible pulmonary administration for the treatment of pulmonary arterial hypertension (PAH). SLN consisting of phospholipid and triglycerides were manufactured using a novel microchannel homogenization method. These sildenafil-loaded SLN were then subjected to physicochemical characterization namely, particle size and distribution over shelf life, differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and analysis of nebulization performance of these SLN by the means of next generation impactor (NGI). Additionally, the morphology of nebulized particles was assessed by transmission electron microscopy using negative staining technique. The solubility of sildenafil citrate and base in the lipid matrix was determined and was 0.1% w/w and 1% w/w, respectively. From the particle size measurements, it was observed that SLN without sildenafil demonstrated consistent particle sizes over 6 months. For the sildenafil-loaded SLN, increased particle sizes were found after manufacturing and further increased within weeks. From WAXD studies, after 6 months high intensity reflections corresponding to the stable ß modification were observed. From DSC results, the peak minimum temperatures increased upon storage, hinting at a transformation to the stable ß modification of triglycerides in the case of sildenafil-loaded SLN. Hence, it can be concluded that even small drug concentration influences particle size and stability.

Evaluation of dika wax-soybean oil-based artesunate-loaded lipospheres: in vitro-in vivo correlation studies.

OBJECTIVES: To formulate and evaluate artesunate-loaded lipospheres and study the in vitro-in vivo correlations (IV-IVC). MATERIALS AND METHODS: Lipospheres were formulated by melt homogenisation using structured lipid matrices consisting of (1:3 and 1:6) soybean oil and dika wax and were characterised in vitro and in vivo. RESULTS: The small angle X-ray diffraction (SAXD) results of the lipid matrices showed prominent reflection at 2θ = 2.49°, d = 3.55 Å while, wide angle X-ray diffraction (WAXD) showed prominent reflection at 2θ = 20.83°, d = 0.42 Å. Lipospheres had maximum encapsulation efficiency of 80%, showed no significant decrease in pH with time (p < 0.05), and had sustained release properties. The ratio of the area under the curve (AUC) of the lipospheres and the tablets gave bioavailability enhancement factor of 2.108. CONCLUSION: Artesunate-loaded lipospheres could be used orally or parenterally once daily, for the treatment of malaria.

Influence of Quil A on liposomal membranes.

Quil A is the purified saponin fraction extracted from the bark of Quillaja saponaria Molina. Besides its utilisation as a surfactant, it is commonly used in a pseudo-ternary system with cholesterol and phospholipid to form colloidal structures known as ISCOMs (immunostimulating complexes). Their appropriateness as immune stimulating drug carriers has been widely demonstrated, albeit the evaluation of physico-chemical properties of the ISCOM matrix still draws a heterogeneous picture. The aim of our study was to elucidate the effects of Quil A on liposomal phosphatidylcholine/cholesterol dispersions as this interaction is regarded as the major step for the formation of the ISCOM matrix. Transmission electron microscopy was applied to observe structural changes of liposomal dispersions upon addition of Quil A. A formation of ISCOM matrices readily out of the liposomal membrane was proven. The entrapment efficiency (EE) of Arsenazo III as well as differential thermal analysis (DSC) also demonstrated an interaction between the components above a critical concentration of Quil A. To further clarify the effects of interaction, Langmuir trough experiments of insoluble monolayers of both cholesterol and PC and their interaction with Quil A were performed. Measurable effects even below the critical concentration of Quil A (derived from DSC and EE) were shown. Cholesterol had a major impact on the formation and stabilisation of the ISCOM matrix.

Wound healing potential of a dimeric InlB variant analyzed by in vitro experiments on re-epithelialization of human skin models.

A constitutively dimeric truncated variant of internalin B (InlB321-CD), acting as stimulator of the receptor tyrosine kinase MET, was tested for dermal wound-healing potential. Due to a lack of the endogenous MET agonist HGF/SF in chronic wounds, HGF/SF substitution by an InlB321-CD-loaded hydrogel might be beneficial in chronic wound therapy. In this study, InlB321-CD in solution and incorporated in a hydrogel was tested for mitogenic effects on immortalized human dermal keratinocytes (HaCaT) with an MTT assay. Cell migration was investigated with a scratch assay on primary keratinocytes (PHK) and on HaCaT. For the latter, scratching needed to be mitomycin C-controlled. InlB321-CD effects on a model of human skin were analyzed histologically with respect to viability. InlB321-CD led to dose-dependent proliferative effects on HaCaT cells whereas the equimolar dose of monomeric InlB321 did not. Upon hydrogel incorporation of InlB321-CD its mitogenic activity for HaCaT cells was maintained thus confirming the hydrogel as a promising drug delivery system. Motogenic effects were shown on both HaCaT and PHK cells. InlB321-CD neither possesses cytotoxic effects on the viability of a human skin model nor alters its organotypic cell morphology.

In vitro and ex vivo toxicological testing of sildenafil-loaded solid lipid nanoparticles.

The aim of this study was to investigate the potential cytotoxicity of solid lipid nanoparticles (SLN) loaded with sildenafil. The SLNs were tested as a new drug delivery system (DDS) for the inhalable treatment of pulmonary hypertension in human lungs. Solubility of sildenafil in SLN lipid matrix (30:70 phospholipid:triglyceride) was determined to 1% sildenafil base and 0.1% sildenafil citrate, respectively. Sildenafil-loaded SLN with particle size of approximately 180 nm and monomodal particle size distribution were successfully manufactured using a novel microchannel homogenization method and were stable up to three months. Sildenafil-loaded SLN were then used in in vitro and ex vivo models representing lung and heart tissue. For in vitro models, human alveolar epithelial cell line (A459) and mouse heart endothelium cell line (MHEC5-T) were used. For ex vivo models, rat precision cut lung slices (PCLS) and rat heart slices (PCHS) were used. All the models were treated with plain SLN and sildenafil-loaded SLN in a concentration range of 0-5000 µg/ml of lipid matrix. The toxicity was evaluated in vitro and ex vivo by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Median lethal dose 50% (LD50) values for A549 cells and PCLS were found to be in the range of 1200-1900 µg/ml while for MHEC5-T cells and precision cut heart slices values were found between 1500 and 2800 µg/ml. PCHS showed slightly higher LD50 values in comparison to PCLS. Considering the toxicological aspects, sildenafil-loaded SLN could have potential in the treatment of pulmonary hypertension via inhalation route.

Structural properties of so-called NSAID-phospholipid-complexes.

So-called NSAID-phospholipid-complexes have been recently reported in literature to reduce local gastrointestinal toxicity. The present work was dedicated to the structural characterization of so-called drug-phospholipid-complexes on the example of diclofenac sodium, ibuprofen and piroxicam complexes with dipalmitoylphosphatidylcholine (DPPC) at different stages of preparation. The applied techniques include (1)H/2D ROESY NMR for the structural characterization in organic solvents, FT-IR and X-ray diffraction for the structural characterization in the solid state and PCS, (31)P NMR, as well as MAS (1)H/2D NOESY NMR for the structural characterization in aqueous media following hydration. Whereas the formation of isolated 1:1 drug-phospholipid-complexes with a preferential location of diclofenac and ibuprofen at the polar head group, stabilized by cation-π interaction, seems reasonable in organic solvents, it was found that mainly liposomal and micellar structures are formed upon hydration of the drug-phospholipid-complexes. Hence the term "NSAID-phospholipid-complex" may be misleading in the context with physiologically relevant aqueous media. Piroxicam did not show significant interaction with DPPC.

Sustained release and permeation of timolol from surface-modified solid lipid nanoparticles through bioengineered human cornea.

PURPOSE: The aim of the study was to formulate and evaluate surface-modified solid lipid nanoparticles sustained delivery system of timolol hydrogen maleate, a prototype ocular drug using a human cornea construct. MATERIALS AND METHODS: Surface-modified solid lipid nanoparticles containing timolol with and without phospholipid were formulated by melt emulsification with high-pressure homogenization and characterized by particle size, wide-angle X-ray diffraction, encapsulation efficiency, and in vitro drug release. Drug transport studies through cornea bioengineered from human donor cornea cells were carried out using a modified Franz diffusion cell and drug concentration analyzed by high-performance liquid chromatography. RESULTS: Results show that surface-modified solid lipid nanoparticles possessed very small particles (42.9 +/- 0.3 nm, 47.2 +/- 0.3 nm, 42.7 +/- 0.7 nm, and 37.7 +/- 0.3 nm, respectively for SM-SLN 1, SM-SLN 2, SM-SLN 3, and SM-SLN 4) with low polydispersity indices, increased encapsulation efficiency (> 44%), and sustained in vitro release compared with unmodified lipid nanoparticles whose particles were greater than 160 nm. Permeation of timolol hydrogen maleate from the surface-modified lipid nanoparticles across the cornea construct was sustained compared with timolol hydrogen maleate solution in distilled water. CONCLUSIONS: Surface-modified solid lipid nanoparticles could provide an efficient way of improving ocular bioavailability of timolol hydrogen maleate.

Comparative permeation studies of nondiluted and diluted betamethasone-17-valerate semisolid formulations through isolated human stratum corneum and artificial skin construct.

PURPOSE OF THE STUDY: This article deals with a comparative study of the permeation of the halogenated corticosteroid betamethasone-17-valerate (BM-17-V) through isolated human stratum corneum (SC) and artificial skin constructs (ASC) from different semisolid formulations described in the German Pharmacopoeia, i.e. wool fat alcohol ointment (WO), basis cream DAC (German Drug Code) and commercial products containing BM-17-V 0.1% weight such as Celestan-V cream, Celestan-V ointment, and Soderm ointment. In this study, pharmacopoeial ointment and cream were loaded in each case with BM-17-V. METHODS: In vitropermeation experiments of BM-17-V were carried out in Franz diffusion cells using isolated human SC and ASC. Permeation data from both systems were compared statistically and those data were linearly correlated to each other. The saturation concentrations of BM-17-V within the formulations were calculated based on microscopical examination. The BM-17-V was metabolized via BM-21-V into betamethasone (BM) as its hydrolization product during the permeation experiments across SC. Since ASC has a higher enzymatic activity and less barrier qualities than SC, furthering the course of the permeation experiment, not only BM permeates besides the noncatabolized drug BM-17-V, but also 9alpha-fluoro-prednisolone as another decomposition product. The detection of BM-17-V and its degradation product was performed by high-performance liquid chromatography. RESULTS: It was observed that the permeation of BM across ASC from all the formulations tested was higher by factors 9.7-27.7 than that from the same formulations permeating through SC, while the permeation sequence of the tested formulations was almost the same for SC and ASC. Afterwards the effect of the dilution of the semisolid formulations containing BM-17-V 0.1% weight on their permeation through SC was examined by mixing them with different ointments and a cream base. The permeation rate of BM from the dilution of Soderm ointment with WO and from WO diluted with different formulations from the German Pharmacopoeia were very similar.

An alkylpolyglucoside surfactant as a prospective pharmaceutical excipient for topical formulations: the influence of oil polarity on the colloidal structure and hydrocortisone in vitro/in vivo permeation.

There is a growing need for research into new skin- and environment-friendly surfactants. This paper focuses on a natural surfactant of an alkylpolyglucoside type, which can form both thermotropic and lyotropic liquid-crystalline phases. The aim of this study was to relate some physicochemical properties (characterised by polarisation and transmission electron microscopy, thermal analysis and rheology) of the three formulations based on cetearyl glucoside and cetearyl alcohol, to the results of in vitro and in vivo bioavailability of hydrocortisone (HC). The three formulations contained oils of different polarity (medium chain triglycerides: MG, isopropyl myristate: IPM and light liquid paraffin: LP), respectively. In vitro permeation was followed through the artificial skin constructs (ASC), while the parameters measured in vivo were erythema index: EI (using instrumental human skin blanching assay), transepidermal water loss (TEWL) and stratum corneum hydration (SCH). The vehicles based on cetearyl glucoside and cetearyl alcohol showed a complex colloidal structure of lamellar liquid-crystalline and lamellar gel-crystalline type, depending on oil polarity. Rheological profile of the vehicle was directly related to the in vitro profile of the HC permeation. In vivo results suggested that the vehicle with MG retarded the HC permeation, whereas less polar IPM and non-polar LP enhanced it. It is suggested that the enhancement is achieved either by a direct interaction with lipid lamellae of the SC or indirectly by improving skin hydration. There were no adverse effects during in vivo study, which indicates a good safety profile of this alkylpolyglucoside surfactant.

Solid lipid nanodispersions containing mixed lipid core and a polar heterolipid: characterization.

This paper describes the characterization of solid lipid nanodispersions (SLN) prepared with a 1:1 mixture of theobroma oil and goat fat as the main lipid matrix and Phospholipon 90G (P90G) as a stabilizer heterolipid, using polysorbate 80 as the mobile surfactant, with a view to applying the SLN in drug delivery. The 1:1 lipid mixture and P90G constituting the lipid matrix was first homogeneously prepared by fusion. Thereafter, the SLN were formulated with a gradient of polysorbate 80 and constant lipid matrix concentration by melt-high pressure homogenisation. The SLN were characterized by time-resolved particle size analysis, zeta potential and osmotic pressure measurements, differential scanning calorimetry (DSC) and wide angle X-ray diffraction (WAXD). Transmission electron microscopy (TEM) and isothermal heat conduction microcalorimetry (IMC) which monitors the in situ crystallization were also carried out on the SLN containing P90G and 1.0 % w/w of polysorbate 80. The results obtained in these studies were compared with SLN prepared with theobroma oil with and without phospholipid. Particle size analysis of SLN indicated reduction in size with increase in concentration of mobile surfactant and was in the lower nanometer range after 3 months except SLN prepared without P90G or polysorbate 80. The lipid nanoparticles had negative potentials after 3 months. WAXD and DSC studies revealed low crystalline SLN after 3 months of storage except in WAXD of SLN formulated with 1.0 % w/w polysorbate 80. TEM micrograph of the SLN containing 1.0 % w/w polysorbate 80 revealed discrete particles whose sizes were in consonance with the static light scattering measurement. In situ crystallization studies in IMC revealed delayed crystallization of the SLN with 1.0 % w/w polysorbate 80. Results indicate lipid mixtures produced SLN with lower crystallinity and higher particle sizes compared with SLN prepared with theobroma oil alone with or without P90G, and would lead to higher drug incorporation efficiency when used in formulation of actives. Mixtures of theobroma oil and goat fat would be suitable for the preparation of nanostructured lipid carriers. SLN of theobroma oil containing phospholipid could prove to be a good ocular or parenteral drug delivery system considering the low particle size, particle size stability and in vivo tolerability of the component lipids. SLN prepared with lipid admixture, which had higher increase in d(90%) on storage are suitable for preparation of topical and transdermal products.

In vitro erythemal UV-A protection factors of inorganic sunscreens distributed in aqueous media using carnauba wax-decyl oleate nanoparticles.

This paper describes the in vitro photoprotection in the UV-A range, i.e. 320-400 nm obtained by the use of carnauba wax-decyl oleate nanoparticles either as encapsulation systems or as accompanying vehicles for inorganic sunscreens such as barium sulfate, strontium carbonate and titanium dioxide. Lipid-free inorganic sunscreen nanosuspensions, inorganic sunscreen-free wax-oil nanoparticle suspensions and wax-oil nanoparticle suspensions containing inorganic sunscreens dispersed either in their oil phase or their aqueous phase were prepared by high pressure homogenization. The in vitro erythemal UV-A protection factors (EUV-A PFs) of the nanosuspensions were calculated by means of a sun protection analyzer. EUV-A PFs being no higher than 4 were obtained by the encapsulation of barium sulfate and strontium carbonate, meanwhile by the distribution of titanium dioxide in presence of wax-oil nanoparticles, the EUV-A PFs varied between 2 and 19. The increase in the EUV-A PFs of the titanium dioxide obtained by the use of wax-oil nanoparticles demonstrated a better performance of the sun protection properties of this pigment in the UV-A region.

Investigation of surface-modified solid lipid nanocontainers formulated with a heterolipid-templated homolipid.

There is increasing interest in the search for improved drug delivery systems with greater versatility. Consequently, many drug delivery systems have been studied. In this study, surface-modified lipid nanocontainers were formulated with a homolipid from Capra hircus (goat fat) templated with a heterolipid (Phospholipon 90G) which was also the surface modifier. The solid lipid nanocontainers (SLN) were formulated by hot high pressure homogenisation using increasing concentrations of polysorbate 80 as the mobile surfactant. Prior to SLN preparation, the templated homolipid was formulated by fusion to obtain a homogeneous lipid matrix, which was characterized using differential scanning calorimetry (DSC), polarized light microscopy (PLM) and wide angle X-ray diffraction (WAXD) to obtain its thermal and crystal characteristics. Isothermal heat conduction microcalorimetry (IMC) and freeze-fracture transmission electron microscopy (FFTEM) studies were carried out on the templated homolipid and SLN containing 1.0% (w/w) of polysorbate 80 to study their in situ crystallization kinetics and morphology, respectively. The formulated SLN were also subjected to time-resolved DSC, WAXD and particle size analyses for one month. The thermal and crystal characteristics were compared with those of the bulk lipid matrix (templated homolipid). Result of the particle size analysis indicated that the particles size remained roughly within the lower nanometer range after one month. FFTEM micrograph of the lipid matrices revealed lamellar sheets for Phospholipon 90G and layered triglyceride structures for the homolipid and Phospholipon 90G-templated homolipid. FFTEM micrograph of SLN revealed anisometric structures. PLM of the templated homolipid did not show, but goat fat (homolipid) alone showed slight growth in crystals with time. WAXD and DSC studies revealed minor increase in crystallinity of the new lipid matrix after one month and DSC also detected templation of homolipid by the heterolipid noted by the disappearance of the lower melting peak of the homolipid. However, for the SLN, WAXD results showed low crystalline particles while DSC only showed a very little endothermic process after one month of storage at 20 degrees C. The implication of this finding is that progression of the SLN to highly ordered particles over time would not occur. This will be favourable for any incorporated drug as drug expulsion, due to increase in crystallinity, will not occur. Result obtained from analysis of the isothermal crystallization exotherms indicated that the templated homolipid and SLN1 containing 1.0% polysorbate 80 possess similar nucleation mechanisms and growth dimensions different from the pure homolipid. The SLN containing 0.5 and 1.0% polysorbate 80 possessed good properties and could prove to be good delivery systems for drugs for parenteral or ocular administration. The result of this study also shows a method of improving natural lipids for use in particulate drug delivery systems.

Artificial sun protection: sunscreens and their carrier systems.

The formulation of sunscreens products requires information about the properties of the substances responsible for the sun protection, their action mechanisms and the vehicles used for their administration. The improvement of the performance of sunscreen substances by a modification of their chemical, physical and technological properties or by the use of conventional and novel carriers is described in this review. The sun protection achieved by the use of sunscreens incorporated into carriers in terms of the sun protection factor (SPF) and other performance indices is also shown. Current manufacturing methods to incorporate sunscreen substances into vehicles are briefly described. Furthermore, basic information related to the dermatological effects of the UV radiation classified according to the different spectral regions of the UV radiation is presented in this manuscript.

Further characterization of theobroma oil-beeswax admixtures as lipid matrices for improved drug delivery systems.

There is an increasing interest in lipid based drug delivery systems due to factors such as better characterization of lipidic excipients and formulation versatility and the choice of different drug delivery systems. It is important to know the thermal characteristics, crystal habit, texture, and appearance of a new lipid matrix when determining its suitability for use in certain pharmaceutical application. It is line with this that this research was embarked upon to characterize mixtures of beeswax and theobroma oil with a view to applying their admixtures in drug delivery systems such as solid lipid nanoparticles and nanostructured lipid carriers. Admixtures of theobroma oil and beeswax were prepared to contain 25% w/w, 50% w/w, and 75% w/w of theobroma oil. The admixtures were analyzed by differential scanning calorimetry (DSC), small angle X-ray diffraction (SAXD), wide angle X-ray diffraction (WAXD), and isothermal heat conduction microcalorimetry (IMC). The melting behavior and microstructures of the lipid admixtures were monitored by polarized light microscopy (PLM). Transmission electron microscopy (TEM) was used to study the internal structures of the lipid bases. DSC traces indicated that the higher melting peaks were roughly constant for the different admixtures, but lower melting peaks significantly increased (p < 0.05). The admixture containing 25% w/w of theobroma oil possessed highest crystallinity index of 95.6%. WAXD studies indicated different reflections for the different lipid matrices. However, new interferences were detected for all the lipid matrix admixtures between 2theta = 22.0 degrees and 2theta = 25.0 degrees. The lipid matrices containing 50% w/w and 25% w/w of theobroma oil showed absence of the weak reflection characteristic of pure theobroma oil, while there was disappearance of the strong intensity reflection of beeswax in all the lipid matrix admixtures at all stages of the study. PLM micrographs revealed differences with regard to the thermal and optical behaviors depending on the composition of the matrix. The lipid matrix consisting of 75% w/w of theobroma oil showed a spherulite texture after 4 weeks of isothermal storage. Crystallization exotherms of lipid matrices containing 50% w/w and 25% w/w of theobroma oil showed change in modification after 30 min with the latter having a greater time-dependent crystallization. Generally, low non-integral Avrami exponents and growth rate constants were obtained for all the lipid matrices, with the admixture containing 25% w/w theobroma oil having the lowest Avrami exponent and growth rate constant. Based on the results obtained, admixtures containing 50% w/w and 75% w/w of theobroma oil could be applied in the formulation of solid lipid nanoparticles and nanostructured lipid carriers as these lipid matrices possessed crystal characteristics that favour such drug delivery systems.

Sun protection enhancement of titanium dioxide crystals by the use of carnauba wax nanoparticles: the synergistic interaction between organic and inorganic sunscreens at nanoscale.

Carnauba wax is partially composed of cinnamates. The rational combination of cinnamates and titanium dioxide has shown a synergistic effect to improve the sun protection factor (SPF) of cosmetic preparations. However, the mechanism of this interaction has not been fully understood. In this study, an ethanolic extract of the carnauba wax and an ethanolic solution of a typical cinnamate derivative, ethylcinnamate, were prepared and their UV absorption and SPF either alone or in the presence of titanium dioxide were compared. The titanium dioxide crystals and the cinnamates solutions were also distributed into a matrix composed of saturated fatty acids to emulate the structure of the crystallized carnauba wax. SPF, differential scanning calorimetry (DSC) and X-ray studies of these matrices were performed. Additionally, carnauba wax nanosuspensions containing titanium dioxide either in the lipid phase or in the aqueous phase were prepared to evaluate their SPFs and their physical structure. Strong UV absorption was observed in diluted suspensions of titanium dioxide after the addition of cinnamates. The saturated fatty acid matrices probably favored the adsorption of the cinnamates at the surface of titanium dioxide crystals, which was reflected by an increase in the SPF. No modification of the crystal structure of the fatty acid matrices was observed after the addition of cinnamates or titanium dioxide. The distribution of the titanium dioxide inside the lipid phase of the nanosuspensions was more effective to reach higher SPFs than that at the aqueous phase. The close contact between the carnauba wax and the titanium dioxide crystals after the high-pressure homogenization process was confirmed by transmission electron microscopy (TEM).

A critical study of novel physically structured lipid matrices composed of a homolipid from Capra hircus and theobroma oil.

There is increasing interest in drug formulation using lipids. In this study, some physically structured lipid matrices were formulated and characterized for drug delivery applications. Lipid matrices containing a novel homolipid from Capra hircus (goat fat) and theobroma oil, at 25, 50 and 75% (w/w) concentration of the homolipid were formulated by fusion. The lipid matrices were subjected to some characterization procedures such as differential scanning calorimetry (DSC) to ascertain their supramolecular properties, small angle X-ray diffraction (SAXD), wide angle X-ray diffraction (WAXD), polarized light microscopy (PLM) and isothermal heat conduction microcalorimetry (IMC). The internal structures of some selected lipid matrices were also studied by freeze-fracture transmission electron microscopy (FFTEM). DSC results obtained indicated that goat fat has a pre-transition at 15.9 +/- 0.2 degrees C (after 1 week) and melts completely with two detectable melting peaks at 33.0 +/- 0.2 and 49.9 +/- 0.1 degrees C, and total enthalpy of 99.9 +/- 2.5 mJ/mg determined after 6 weeks of preparation. The melting enthalpy of goat fat changed after 3 weeks but remained constant after 6 weeks while the melting enthalpy of the lipid matrix containing 50% (w/w) goat fat changed after 3 and 6 weeks. An increase in lower melting peak was observed in the lipid matrix containing 25% (w/w) goat fat after 6 weeks. WAXD and SAXD of the physically structured lipid matrices showed reflections of the different pure lipids but new interferences were detected in WAXD mostly between 2theta=17.5 degrees and 2theta=27.5 degrees . PLM observation revealed the presence of Maltese crosses for the homolipid at 37 degrees C, which disappeared upon heating at 51.0 degrees C. PLM of the structured lipid matrix containing 25% (w/w) goat fat showed distinct crystal growth after 4 weeks among the admixtures. However, IMC studies did not reveal any change in recrystallization behaviour in this lipid matrix within 24 h. Analysis of the crystallization exotherms indicated that the lipid matrix containing 50% (w/w) goat fat showed unique crystallization kinetics and possessed the lowest Avrami exponent, while goat fat alone showed slight change within the first 45 min of isothermal crystallization. Physically structured lipid matrix containing 75% (w/w) goat fat possessed the lowest growth rate constant.