Optimisation of DNA electroporation protocols for different plant-associated bacteria.

Electroporation is a vital process that facilitates the use of modern recombineering and other high-throughput techniques in a wide array of microorganisms, including non-model bacteria like plant growth-promoting bacteria (PGPB). These microorganisms play a significant role in plant health by colonizing plants and promoting growth through nutrient exchange and hormonal regulation. In this study, we introduce a sequential Design of Experiments (DOE) approach to obtain highly competent cells swiftly and reliably for electroporation. Our method focuses on optimizing the three stages of the electroporation procedure-preparing competent cells, applying the electric pulse field, and recovering transformed cells-separately. We utilized a split-plot fractional design with five factors and a covariate to optimize the first step, response surface methodology (RSM) for the second step, and Plackett-Burman design for two categorical factors and one continuous factor for the final step. Following the experimental sequence with three bacterial models, we achieved efficiencies 10 to 100 times higher, reaching orders of 105 to 106 CFU/µg of circular plasmid DNA. These results highlight the significant potential for enhancing electroporation protocols for non-model bacteria.

The naringenin-dependent regulator FdeR can be applied as a NIMPLY gate controlled by naringenin and arabinose.

The FdeR regulator has been reported as a transcriptional activator dependent on the interaction with naringenin. Previously, FdeR and its cognate promoter were used to construct naringenin-sensitive sensors, though no correlation was associated between the FdeR level of expression and outputs. Therefore, to understand this correlation, we constructed a circuit with FdeR expression adjusted by the arabinose concentration through an AraC-PBAD system and the FdeR-regulated promoter controlling the expression of GFP. We observed a significant reduction in the activity of the target promoter by increasing FdeR expression, indicating that although FdeR has been primarily classified as a transcriptional activator, it also represses transcription. Leveraging the bifunctional feature of FdeR, acting as both transcriptional activator and repressor, we demonstrated that this genetic circuit, when previously switched on by naringenin, can be switched off by inducing an increased FdeR expression level. This engineered system functioned as a NIMPLY gate, effectively decreasing GFP expression by 50% when arabinose was added without removing naringenin from the medium. Exploiting FdeR versatility, this study demonstrates an innovative application of this transcriptional factor for developing novel NIMPLY gates activated by a molecule with low toxicity and nutraceutical properties that may be important for several applications. Graphical Abstract.

One-step selective layer assemble: A versatile approach for the development of a SARS-CoV-2 electrochemical immunosensor.

The appearance of new viruses and diseases has made the development of rapid and reliable diagnostic tests crucial. In light of it, we proposed a new method for assembling an electrochemical immunosensor, based on a one-step approach for selective layer formation. For this purpose, a mixture containing the immobilizing agent (polyxydroxybutyrate, PHB) and the recognition element (antibodies against SARS-CoV-2 nucleocapsid protein) was prepared and used to modify a screen-printed carbon electrode with electrodeposited graphene oxide, for the detection of SARS-CoV-2 nucleocapsid protein (N-protein). Under optimum conditions, N-protein was successfully detected in three different matrixes - saliva, serum, and nasal swab, with the lowest detectable values of 50 pg mL-1, 1.0 ng mL-1, and 50 pg mL-1, respectively. Selectivity was assessed against SARS-CoV-2 receptor-binding domain protein (RBD) and antibodies against yellow fever (YF), and no significant response was observed in presence of interferents, reinforcing the suitability of the proposed one-step approach for selective layer formation. The proposed biosensor was stable for up to 14 days, and the mixture was suitable for immunosensor preparation even after 60 days of preparation. The proposed assembly strategy reduces the cost, analysis time, and waste generation. This reduction is achieved through miniaturization, which results in the decreased use of reagents and sample volumes. Additionally, this approach enables healthcare diagnostics to be conducted in developing regions with limited resources. Therefore, the proposed one-step approach for selective layer formation is a suitable, simpler, and a reliable alternative for electrochemical immunosensing.

Identification, Antioxidant Capacity, and Matrix Metallopeptidase 9 (MMP-9) In Silico Inhibition of Haloarchaeal Carotenoids from Natronococcus sp. and Halorubrum tebenquichense.

Natural pigments from haloarchaea are of great interest; bacterioruberin is the major pigment, it shows higher antioxidant power when compared with ß-carotene. However, characterization of bacterioruberin and its isomers along with its antioxidant and the matrix metallopeptidase 9 (MMP-9) inhibition activities in extracts from Natronoccoccus sp. TC6 and Halorubrum tebenquichense SU10 was not previously described, being the aim of this work. The carotenoids profile was performed by UV-Vis spectrophotometry, thin-layer chromatography, nuclear magnetic resonance spectroscopy, and high-resolution mass spectrometry (UPLC-ESI-MS/MS). Antioxidant capacity was determined for DPPH, ABTS, and FRAP. In addition, MMP-9 inhibition was studied using docking simulations. The carotenoid profile of studied strains was composed of bacterioruberin, some derivatives like mono, bis, and tris anhydrobacterioruberin, and also some bacterioruberin cis isomers. The carotenoid pools showed antioxidant capacity for DPPH > ABTS > FRAP; Natronococcus sp. TC6 carotenoid pool was better for ABTS and DPPH, while Halorubrum tebenquichense SU10 carotenoid pool was better for FRAP. Additionally, docking and molecular dynamics suggest that bacterioruberin inhibits MMP-9 through hydrophobic interactions near the catalytic site. Bacterioruberin shows the higher binding energy of -8.3 (kcal/mol). The carotenoids profile of both strains was elucidated, their antioxidant activity and singular participation of each carotenoid on MMP-9 in silico inhibition were evaluated.

Effects of kosmotropic, chaotropic, and neutral salts on Candida antarctica B lipase: An analysis of the secondary structure and its hydrolytic activity on triglycerides.

The effects of different concentrations of Hofmeister salts on the hydrolytic activity on triglycerides and the secondary structure of lipase B from Candida antarctica (CALB) were investigated. Structural changes after short- and long-time incubation at high salt concentrations were determined using circular dichroism (CD), fluorescence, and RMSD-RMSF simulations. At 5.2 M NaCl, the hydrolytic activity of CALB on tributyrin (TC4) and trioctanoin (TC8) was enhanced by 1.5 (from 817 ± 3.9 to 1228 ± 4.3 U/mg)- and 8.7 (from 25 ± 0.3 to 218 ± 2.3 U/mg)-folds compared with 0.15 M NaCl, respectively at pH 7.0 and 40 °C. An activity activation was seen with other salts tested; however, long-time incubation (24 h) did not result in retention of the activation effect for any of the salts tested. Secondary structure CD and fluorescence spectra showed that long-time incubation with NaCl, KCl, and CsCl provokes a compact structure without loss of native conformation, whereas chaotropic LiCl and CaCl2 induced an increase in the α-helical content, and kosmotropic Na2SO4 provoked a molten globule state with rich ß-sheet content. The RMSD-RMSF simulation agreed with the CD analysis, highlighting a principal salt-induced effect at the α-helix 5 region, promoting two different conformational states (open and closed) depending on the type and concentration of salt. Lastly, an increase in the interfacial tension occurred when high salt concentrations were added to the reaction media, affecting the catalytic properties. The results indicate that high-salt environments, such as 2-5.2 M NaCl, can be used to increase the lipolytic activity of CALB on TC4 and TC8.

Novel approach based on GQD-PHB as anchoring platform for the development of SARS-CoV-2 electrochemical immunosensor.

In the present work, we report an innovative approach for immunosensors construction. The experimental strategy is based on the anchoring of biological material at screen-printed carbon electrode (SPE) modified with electrodeposited Graphene Quantum Dots (GQD) and polyhydroxybutyric acid (PHB). It was used as functional substract basis for the recognition site receptor-binding domain (RBD) from coronavirus spike protein (SARS-CoV-2), for the detection of Anti-S antibodies (AbS). SEM images and EDS spectra suggest an interaction of the protein with GQD-PHB sites at the electrode surface. Differential pulse voltametric (DPV) measurements were performed before and after incubation, in presence of the target, shown a decrease in voltametric signal of an electrochemical probe ([Fe(CN)6]3/4-). Using the optimal experimental conditions, analytical curves were performed in PBS and human serum spiked with AbS showing a slight matrix effect and a relationship between voltametric signal and AbS concentration in the range of 100 ng mL-1 and 10 µg mL-1. The selectivity of the proposed sensor was tested against yellow fever antibodies (YF) and the selective layer on the electrode surface did not interact with these unspecific antibodies. Eight samples of blood serum were analyzed and 87.5% of these total investigated provided adequate results. In addition, the present approach showed better results against traditional EDC/NHS reaction with enhancements in time and the possibility to develop an immunosensor in a single drop, since the proteins can be anchored prior to the electrode modification step.

Plasmodium vivax vaccine: What is the best way to go?

Malaria is one of the most devastating human infectious diseases caused by Plasmodium spp. parasites. A search for an effective and safe vaccine is the main challenge for its eradication. Plasmodium vivax is the second most prevalent Plasmodium species and the most geographically distributed parasite and has been neglected for decades. This has a massive gap in knowledge and consequently in the development of vaccines. The most significant difficulties in obtaining a vaccine against P. vivax are the high genetic diversity and the extremely complex life cycle. Due to its complexity, studies have evaluated P. vivax antigens from different stages as potential targets for an effective vaccine. Therefore, the main vaccine candidates are grouped into preerythrocytic stage vaccines, blood-stage vaccines, and transmission-blocking vaccines. This review aims to support future investigations by presenting the main findings of vivax malaria vaccines to date. There are only a few P. vivax vaccines in clinical trials, and thus far, the best protective efficacy was a vaccine formulated with synthetic peptide from a circumsporozoite protein and Montanide ISA-51 as an adjuvant with 54.5% efficacy in a phase IIa study. In addition, the majority of P. vivax antigen candidates are polymorphic, induce strain-specific and heterogeneous immunity and provide only partial protection. Nevertheless, immunization with recombinant proteins and multiantigen vaccines have shown promising results and have emerged as excellent strategies. However, more studies are necessary to assess the ideal vaccine combination and test it in clinical trials. Developing a safe and effective vaccine against vivax malaria is essential for controlling and eliminating the disease. Therefore, it is necessary to determine what is already known to propose and identify new candidates.

Control of Gene Expression With Quercetin-Responsive Modular Circuits.

Control of gene expression is crucial for several biotechnological applications, especially for implementing predictable and controllable genetic circuits. Such circuits are often implemented with a transcriptional regulator activated by a specific signal. These regulators should work independently of the host machinery, with low gratuitous induction or crosstalk with host components. Moreover, the signal should also be orthogonal, recognized only by the regulator with minimal interference with the host operation. In this context, transcriptional regulators activated by plant metabolites as flavonoids emerge as candidates to control gene expression in bacteria. However, engineering novel circuits requires the characterization of the genetic parts (e.g., genes, promoters, ribosome binding sites, and terminators) in the host of interest. Therefore, we decomposed the QdoR regulatory system of B. subtilis, responsive to the flavonoid quercetin, and reassembled its parts into genetic circuits programmed to have different levels of gene expression and noise dependent on the concentration of quercetin. We showed that only one of the promoters regulated by QdoR worked well in E. coli, enabling the construction of other circuits induced by quercetin. The QdoR expression was modulated with constitutive promoters of different transcriptional strengths, leading to low expression levels when QdoR was highly expressed and vice versa. E. coli strains expressing high and low levels of QdoR were mixed and induced with the same quercetin concentration, resulting in two stable populations expressing different levels of their gene reporters. Besides, we demonstrated that the level of QdoR repression generated different noise levels in gene expression dependent on the concentration of quercetin. The circuits presented here can be exploited in applications requiring adjustment of gene expression and noise using a highly available and natural inducer as quercetin.

Prospection of plasma proteins as biomarkers for diabetes mellitus monitoring.

PURPOSE: This prospective study aimed to detect and identify plasma proteins differentially expressed between groups of Brazilian diagnosed with type 1 (T1DM), type 2 (T2DM) diabetes with good and poor glycemic control and the non-diabetic group denominated control group (CG). METHODS: Patients with T1DM and T2DM were subdivided according to their glycated haemoglobin (HbA1c) level: ≥ 53 mmol/mol and < 53 mmol/mol. Each subgroup was composed of ten subjects (n = 10). The plasma from each subgroup was pooled and depleted of albumin and IgG. The reminiscent proteins were quantified and separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The relative volume of protein bands was determined by densitometry analysis, and those with differential abundance were identified by MALDI-TOF mass spectrometry. RESULTS: Alpha 2 - Macroglobulin (AMG) was 1.3-fold more abundant in T1DM with HbA1c ≥ 53 mmol/mol and < 53 mmol/mol and 1.4-fold more abundant in T2DM with HbA1c ≥ 53 mmol/mol compared to CG. Ceruloplasmin (Cp) and Haptoglobin (Hp) were overexpressed above 1.5-fold in all DM subgroups. Cp in T1DM and Hp in both types of DM were more expressed in HbA1c ≥ 53 mmol/mol than <53 mmol/mol. Apolipoprotein A-I (Apo A-I) was upregulated only in T2DM subgroups. CONCLUSION: In summary, three positive acute-phase proteins, AMG, Cp and Hp were more abundant in diabetic individuals regardless of the diabetes type. The highest Hp abundance in both types of DM with HbA1c ≥ 53 mmol/mol, reinforces Hp as a possible biomarker associated with diabetic complications.

The Quorum Sensing Auto-Inducer 2 (AI-2) Stimulates Nitrogen Fixation and Favors Ethanol Production over Biomass Accumulation in Zymomonas mobilis.

Autoinducer 2 (or AI-2) is one of the molecules used by bacteria to trigger the Quorum Sensing (QS) response, which activates expression of genes involved in a series of alternative mechanisms, when cells reach high population densities (including bioluminescence, motility, biofilm formation, stress resistance, and production of public goods, or pathogenicity factors, among others). Contrary to most autoinducers, AI-2 can induce QS responses in both Gram-negative and Gram-positive bacteria, and has been suggested to constitute a trans-specific system of bacterial communication, capable of affecting even bacteria that cannot produce this autoinducer. In this work, we demonstrate that the ethanologenic Gram-negative bacterium Zymomonas mobilis (a non-AI-2 producer) responds to exogenous AI-2 by modulating expression of genes involved in mechanisms typically associated with QS in other bacteria, such as motility, DNA repair, and nitrogen fixation. Interestingly, the metabolism of AI-2-induced Z. mobilis cells seems to favor ethanol production over biomass accumulation, probably as an adaptation to the high-energy demand of N2 fixation. This opens the possibility of employing AI-2 during the industrial production of second-generation ethanol, as a way to boost N2 fixation by these bacteria, which could reduce costs associated with the use of nitrogen-based fertilizers, without compromising ethanol production in industrial plants.

The protective role of PHB and its degradation products against stress situations in bacteria.

Many bacteria produce storage biopolymers that are mobilized under conditions of metabolic adaptation, for example, low nutrient availability and cellular stress. Polyhydroxyalkanoates are often found as carbon storage in Bacteria or Archaea, and of these polyhydroxybutyrate (PHB) is the most frequently occurring PHA type. Bacteria usually produce PHB upon availability of a carbon source and limitation of another essential nutrient. Therefore, it is widely believed that the function of PHB is to serve as a mobilizable carbon repository when bacteria face carbon limitation, supporting their survival. However, recent findings indicate that bacteria switch from PHB synthesis to mobilization under stress conditions such as thermal and oxidative shock. The mobilization products, 3-hydroxybutyrate and its oligomers, show a protective effect against protein aggregation and cellular damage caused by reactive oxygen species and heat shock. Thus, bacteria should have an environmental monitoring mechanism directly connected to the regulation of the PHB metabolism. Here, we review the current knowledge on PHB physiology together with a summary of recent findings on novel functions of PHB in stress resistance. Potential applications of these new functions are also presented.

A sensitive pH indicator-based spectrophotometric assay for PHB depolymerase activity on microtiter plates.

A continuous spectrophotometric assay for the screening of PHB depolymerase activity in microtiter plates was developed. We evaluated crystalline PHB in the suspension and coated it with the addition of a pH indicator to detect the breakage of the ester bond by proton titration. The reaction rate and the concentration of the recombinant PhaZ1 from Paucimonas lemoignei PHB depolymerase presented a linear correlation. A comparison of the proposed method with the turbidimetric method adapted to the microtiter plates revealed that the use of indicators increases the response signal by at least 5-fold, resulting in increased sensitivity and better signal-to-noise ratio. Furthermore, the proposed method offers a wide range of pH from 5.0 to 9.2 by using different buffer-indicator pairs and was employed for the screening of PHB-depolymerase activity on 140 bacterial strains isolated from Lake Chapala. Eleven strains were positive for PHB-depolymerase activity, which were ACSLRF-27, ACPLRF-6, and ACPLRF-5 (16S rRNA sequence alignment revealed 99-100% similarity with Actinomadura geliboluensis strain A8036, Streptomyces cavourensis strain NRRL 2740, and Streptomyces coelicolor strain DSM 40233, respectively); these that showed the highest activities. In conclusion, the method was successfully applied for finding new strains and for quantifying the PHB depolymerases activity with crystalline PHB.

3-Hydroxybutyrate Derived from Poly-3-Hydroxybutyrate Mobilization Alleviates Protein Aggregation in Heat-Stressed Herbaspirillum seropedicae SmR1.

Under conditions of carbon starvation or thermal, osmotic, or oxidative shock, mutants affected in the synthesis or mobilization of poly-3-hydroxybutyrate (PHB) are known to survive less well. It is still unclear if the synthesis and accumulation of PHB are sufficient to protect bacteria against stress conditions or if the stored PHB has to be mobilized. Here, we demonstrated that mobilization of PHB in Herbaspirillum seropedicae SmR1 was heat-shock activated at 45°C. In situ proton (1H) nuclear magnetic resonance spectroscopy (i.e., 1H-nuclear magnetic resonance) showed that heat shock increased amounts of 3-hydroxybutyrate (3HB) only in H. seropedicae strains able to synthesize and mobilize PHB. H. seropedicae SmR1 mutants unable to synthesize or mobilize PHB were more susceptible to heat shock and survived less well than the parental strain. When 100 mM 3-hydroxybutyrate was added to the medium, the ΔphaC1 strain (an H. seropedicae mutant unable to synthesize PHB) and the double mutant with deletion of both phaZ1 and phaZ2 (i.e., ΔphaZ1.2) (unable to mobilize PHB) showed partial rescue of heat adaptability (from 0% survival without 3HB to 40% of the initial viable population). Addition of 200 mM 3HB before the imposition of heat shock reduced protein aggregation to 15% in the ΔphaC1 mutant and 12% in the ΔphaZ1.2 mutant. We conclude that H. seropedicae SmR1 is naturally protected by 3HB released by PHB mobilization, while mutants unable to generate large amounts of 3HB under heat shock conditions are less able to cope with heat damage.IMPORTANCE Bacteria are subject to abrupt changes in environmental conditions affecting their growth, requiring rapid adaptation. Increasing the concentration of some metabolites can protect bacteria from hostile conditions that lead to protein denaturation and precipitation, as well as damage to plasma membranes. In this work, we demonstrated that under thermal shock, the bacterium Herbaspirillum seropedicae depolymerized its intracellular stock polymer known as poly-3-hydroxybutyrate (PHB), rapidly increasing the concentration of 3-hydroxybutyrate (3HB) and decreasing protein precipitation by thermal denaturation. Mutant H. seropedicae strains unable to produce or depolymerize PHB suffered irreparable damage during thermal shock, resulting in fast death when incubated at 45°C. Our results will contribute to the development of bacteria better adapted to high temperatures found either in natural conditions or in industrial processes. In the case of H. seropedicae and other bacteria that interact beneficially with plants, the understanding of PHB metabolism can be decisive for the development of more-competitive strains and their application as biofertilizers in agriculture.

Author Correction: The transcriptional regulator NtrC controls glucose-6-phosphate dehydrogenase expression and polyhydroxybutyrate synthesis through NADPH availability in Herbaspirillum seropedicae.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Biochemical characterization and application of a new lipase and its cognate foldase obtained from a metagenomic library derived from fat-contaminated soil.

LipMF3 is a new lipase isolated from a metagenomic library derived from a fat-contaminated soil. It belongs to the lipase subfamily I.1 and has identities of 68% and 67% with lipases of Chromobacterium violaceum and C. amazonense, respectively. Genes encoding LipMF3 and its cognate foldase, LifMF3, were cloned and co-expressed in Escherichia coli. The highest hydrolytic activity of purified Lip-LifMF3 was at 40 °C and pH 6.5. Under these conditions, the highest activity was against tributyrin (1650 U mg-1), but it also had high activity against olive oil (862 U mg-1). It was stable in hydrophilic organic solvents (25%, v/v in water) with residual activity around 100% after 24 h. It also showed stability over a wide pH range (5.5 to 11) with residual activity above 80% after 24 h. Lip-LifMF3 was immobilized by covalent bonding onto Immobead 150P and by adsorption onto Sepabeads FP-BU. The latter preparation gave the best results, producing 94% conversion after 5 h for the synthesis of ethyl oleate and a 90% enantiomeric excess of the product (R)­1­phenylethyl acetate for the kinetic resolution of (R,S)­1­phenyl­1­ethanol. The results obtained in this work provide a basis for the development of applications of Lip-LifMF3 in biocatalysis.

Genome sequencing of Burkholderia contaminans LTEB11 reveals a lipolytic arsenal of biotechnological interest.

Burkholderia contaminans LTEB11 is a Gram-negative betaproteobacterium isolated as a contaminant of a culture in mineral medium supplemented with vegetable oil. Here, we report the genome sequence of B. contaminans LTEB11, identifying and analyzing the genes involved in its lipolytic machinery and in the production of other biotechnological products.

Importance of Poly-3-Hydroxybutyrate Metabolism to the Ability of Herbaspirillum seropedicae To Promote Plant Growth.

Herbaspirillum seropedicae is an endophytic bacterium that establishes an association with a variety of plants, such as rice, corn, and sugarcane, and can significantly increase plant growth. H. seropedicae produces polyhydroxybutyrate (PHB), stored in the form of insoluble granules. Little information is available on the possible role of PHB in bacterial root colonization or in plant growth promotion. To investigate whether PHB is important for the association of H. seropedicae with plants, we inoculated roots of Setaria viridis with H. seropedicae strain SmR1 and mutants defective in PHB production (ΔphaP1, ΔphaP1 ΔphaP2, ΔphaC1, and ΔphaR) or mobilization (ΔphaZ1 ΔphaZ2). The strains producing large amounts of PHB colonized roots, significantly increasing root area and the number of lateral roots compared to those of PHB-negative strains. H. seropedicae grows under microaerobic conditions, which can be found in the rhizosphere. When grown under low-oxygen conditions, only the parental strain and ΔphaP2 mutant exhibited normal growth. The lack of normal growth under low oxygen correlated with the inability to stimulate plant growth, although there was no effect on the level of root colonization. The data suggest that PHB is produced in the root rhizosphere and plays a role in maintaining normal metabolism under microaerobic conditions. To confirm this, we screened for green fluorescent protein (GFP) expression under the control of the H. seropedicae promoters of the PHA synthase and PHA depolymerase genes in the rhizosphere. PHB synthesis is active on the root surface and later PHB depolymerase expression is activated.IMPORTANCE The application of bacteria as plant growth promoters is a sustainable alternative to mitigate the use of chemical fertilization in agriculture, reducing negative economic and environmental impacts. Several plant growth-promoting bacteria synthesize and accumulate the intracellular polymer polyhydroxybutyrate (PHB). However, the role of PHB in plant-bacterium interactions is poorly understood. In this study, applying the C4 model grass Setaria viridis and several mutants in the PHB metabolism of the endophyte Herbaspirillum seropedicae yielded new findings on the importance of PHB for bacterial colonization of S. viridis roots. Taken together, the results show that deletion of genes involved in the synthesis and degradation of PHB reduced the ability of the bacteria to enhance plant growth but with little effect on overall root colonization. The data suggest that PHB metabolism likely plays an important role in supporting specific metabolic routes utilized by the bacteria to stimulate plant growth.

Comparative features between recombinant lipases CALA-like from U. maydis and CALA from C. antarctica in thermal stability and selectivity.

OBJECTIVES: Ustilago maydis lipase A (UMLA) expressed in Pichia pastoris was compared with Candida antarctica lipase A (CALA) to study its biochemical properties such as thermostability and selectivity. RESULTS: UMLA had similar behavior to its homologue CALA regarding the effect of pH and temperature on enzymatic activity, substrate preference and selectivity. Both lipases were active on insoluble triglycerides as well as natural oils and hydrolyzed preferably esters with short and medium acyl and alkyl chains. Both enzymes were slightly selective for the (S)-glycidyl butyrate enantiomer and had a remarkable preference for the sn-2 position of triglycerides. The optimal activity was 40 and 50 °C for UMLA and CALA, respectively. However, temperature had a greater effect on the stability of UMLA compared to CALA, observing a half-life at 50 °C of 2.07 h and 12.83 h, respectively. CONCLUSIONS: UMLA shares some biochemical properties with CALA such as the sn-2 preference on triglyceride hydrolysis and transesterification. However, the high thermostability attributed to CALA was not observed in UMLA; this can be due to the lack of stabilization via AXXXA motifs in helices and fewer proline residues at the surface.

Tailoring recombinant lipases: keeping the His-tag favors esterification reactions, removing it favors hydrolysis reactions.

We determined the effect of the His-tag on the structure, activity, stability and immobilization of LipC12, a highly active lipase from a metagenomic library. We purified LipC12 with a N-terminal His-tag and then removed the tag using tobacco etch virus (TEV) protease. Circular dichroism analysis showed that the overall structure of LipC12 was largely unaffected by His-tag removal. The specific hydrolytic activities against natural and artificial substrates were significantly increased by the removal of the His-tag. On the other hand, His-tagged LipC12 was significantly more active and stable in the presence of polar organic solvents than untagged LipC12. The immobilization efficiency on Immobead 150 was 100% for both forms of LipC12 and protein desorption studies confirmed that the His-tag does not participate in the covalent binding of the enzyme. In the case of immobilized LipC12, the His-tag negatively influenced the hydrolytic activity, as it had for the free lipase, however, it positively influenced the esterification activity. These results raise the possibility of tailoring recombinant lipases for different applications, where the His-tag may be retained or removed, as appropriate for the desired activity.

Co-expression, purification and characterization of the lipase and foldase of Burkholderia contaminans LTEB11.

Genes encoding lipase LipBC (lipA) and foldase LifBC (lipB) were identified in the genome of Burkholderia contaminans LTEB11. Analysis of the predicted amino acid sequence of lipA showed its high identity with lipases from Pseudomonas luteola (91%), Burkholderia cepacia (96%) and Burkholderia lata (97%), and classified LipBC lipase in the lipase subfamily I.2. The genes lipA and lipB were amplified and cloned into expression vectors pET28a(+) and pT7-7, respectively. His-tagged LipBC and native LifBC were co-expressed in Escherichia coli and purified. LipBC and LifBC have molecular weights of 35.9 kDa and 37 kDa, respectively, and remain complexed after purification. The Lip-LifBC complex was active and stable over a wide range of pH values (6.5-10) and temperatures (25-45 °C), with the highest specific activity (1426 U mg-1) being against tributyrin. The Lip-LifBC complex immobilized on Sepabeads was able to catalyze the synthesis of ethyl-oleate in n­hexane with an activity of 4 U g-1, maintaining high conversion (>80%) over 5 reaction cycles of 6 h at 45 °C. The results obtained in this work provide a basis for the development of applications of recombinant LipBC in biocatalysis.