Swelling and Orientation Behavior of End-Grafted Polymer Chains by In Situ Attenuated Total Reflection Fourier Transform Infrared Spectroscopy Complementing In Situ Ellipsometry.

The literature lacks established concrete parameters for assigning grafted chain regimes. In this context, dichroic in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and in situ ellipsometry were used complementarily, offering new opportunities for conformational analysis of end-grafted polymer chains. Especially polymer chain orientation was studied as a new parameter, among others, for proper chain regime assignment in this report. Alkyne-functionalized poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) with a molecular weight of 49.8 kg/mol and a contour length of around 80 nm was grafted to self-assembled monolayers bearing triazole end groups as reported. Different chain regimes were generated by using three different grafting densities. ATR-FTIR spectroscopy based on the ν(C═O) stretching vibration at around 1728 cm-1 provided a new direct approach to determine the GD of polymer chains. Significant shifts in the position of the ν(C═O) band comparing dry and wet states were observed, caused by increased hydrogen bonding interactions between PDMAEMA and water. Finally, the averaged orientation of PDMAEMA chains along the z-axis was determined using dichroic ATR-FTIR spectroscopy based on the dichroic ratios of the ν(C═O) band and molecular order parameters SZ,MOL calculated thereof. High SZ,MOL values were found for the wet state compared to the dry state, confirming that all GD PDMAEMA samples are in the brush regime in the swollen state.

Interfacial Rearrangements of Block Copolymer Micelles Toward Gelled Liquid-Liquid Interfaces with Adjustable Viscoelasticity.

Though amphiphiles are ubiquitously used for altering interfaces, interfacial reorganization processes are in many cases obscure. For example, adsorption of micelles to liquid-liquid interfaces is often accompanied by rapid reorganizations toward monolayers. Then, the involved time scales are too short to be followed accurately. A block copolymer system, which comprises poly(ethylene oxide)110 -b-poly{[2-(methacryloyloxy)ethyl]diisopropylmethylammonium chloride}170 (i.e., PEO110 -b-qPDPAEMA170 with quaternized poly(diisopropylaminoethyl methacrylate)) is presented. Its reorganization kinetics at the water/n-decane interface is slowed down by electrostatic interactions with ferricyanide ([Fe(CN)6 ]3- ). This deceleration allows an observation of the restructuring of the adsorbed micelles not only by tracing the interfacial pressure, but also by analyzing the interfacial rheology and structure with help of atomic force microscopy. The observed micellar flattening and subsequent merging toward a physically interconnected monolayer lead to a viscoelastic interface well detectable by interfacial shear rheology (ISR). Furthermore, the "gelled" interface is redox-active, enabling a return to purely viscous interfaces and hence a manipulation of the rheological properties by redox reactions. Additionally, interfacial Prussian blue formation stiffens the interface. Such manipulation and in-depth knowledge of the rheology of complex interfaces can be beneficial for the development of emulsion formulations in industry or medicine, where colloidal stability or adapted permeability is crucial.

Constrained thermoresponsive polymers - new insights into fundamentals and applications.

In the last decades, numerous stimuli-responsive polymers have been developed and investigated regarding their switching properties. In particular, thermoresponsive polymers, which form a miscibility gap with the ambient solvent with a lower or upper critical demixing point depending on the temperature, have been intensively studied in solution. For the application of such polymers in novel sensors, drug delivery systems or as multifunctional coatings, they typically have to be transferred into specific arrangements, such as micelles, polymer films or grafted nanoparticles. However, it turns out that the thermodynamic concept for the phase transition of free polymer chains fails, when thermoresponsive polymers are assembled into such sterically confined architectures. Whereas many published studies focus on synthetic aspects as well as individual applications of thermoresponsive polymers, the underlying structure-property relationships governing the thermoresponse of sterically constrained assemblies, are still poorly understood. Furthermore, the clear majority of publications deals with polymers that exhibit a lower critical solution temperature (LCST) behavior, with PNIPAAM as their main representative. In contrast, for polymer arrangements with an upper critical solution temperature (UCST), there is only limited knowledge about preparation, application and precise physical understanding of the phase transition. This review article provides an overview about the current knowledge of thermoresponsive polymers with limited mobility focusing on UCST behavior and the possibilities for influencing their thermoresponsive switching characteristics. It comprises star polymers, micelles as well as polymer chains grafted to flat substrates and particulate inorganic surfaces. The elaboration of the physicochemical interplay between the architecture of the polymer assembly and the resulting thermoresponsive switching behavior will be in the foreground of this consideration.

Multiresponsive Transitions of PDMAEMA Brushes for Tunable Surface Patterning.

Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) is an attractive polymer for switchable surface coatings based on its multiresponsiveness toward environmental triggers (temperature, pH-value, ionic strength). In this in situ study, we present the complex and tunable thermoresponsiveness of PDMAEMA Guiselin brushes (9 nm, dry thickness), which were prepared via an efficient grafting-to approach. Combining in situ atomic force microscopy (AFM) visualizing the surface topography (x-y plane) and spectroscopic ellipsometry monitoring the swelling behavior of the polymer film (layer thickness, z-direction) offers for the first time a three-dimensional insight into thermoresponsive transitions on the nanoscale. While PDMAEMA films exhibit LCST behavior in the presence of monovalent counterions, it can easily be switched toward an UCST thermoresponsiveness via the addition of small quantities of multivalent ions. In both cases, the transition temperature as well as the sharpness and reversibility of the transition can be tuned via a second external trigger, the ionic strength. Whereas homogeneous surfaces were observed both below and above the LCST in monovalent salt solutions, the UCST transition was characterized by the in situ formation of a nanostructured surface of pinned PDMAEMA micelles with entrapped multivalent counterions. Moreover, it was demonstrated for the first time that the characteristic dimensions of the nanopattern (the diameter and height of the pinned micelles) could be tuned in situ by the pH- and induced UCST thermoresponsiveness of PDMAEMA. This approach therefore provides a novel bottom-up strategy to create and control polymeric nanostructures in an aqueous environment.

Smart functional polymer coatings for paper with anti-fouling properties.

Cellulose, as the main component of paper, is becoming more and more important for several high tech applications because of its beneficial properties, such as abundance, low cost, renewability, mechanical robustness and biocompatibility. To make cellulose accessable for new applications it is necessary to introduce new properties, which can be done by surface modification e.g. grafting of polymers onto surfaces. In this work, two comb copolymers, poly[(2-methyl-2-oxazoline methacrylate)-co-glycidyl methacrylate] and poly[(2-methacryloyloxyethyl phosphorylcholine)-co-glycidyl methacrylate], were synthesized by free radical polymerization of glycidyl methacrylate and oligo(2-methyl-2-oxazoline) as well as 2-methacryloyloxyethyl phosphorylcholine. After extensive characterization the polymers were covalently attached to thin cellulose model layers and filter paper using a one-step grafting-to approach. For the comprehensive analysis of these layers, thin cellulose films were fabricated on silicon wafers by spin coating of trimethylsilyl cellulose followed by acid hydrolysis which resulted in homogeneous layers as substrates for the grafting process of the functional polymers. The layers were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), atomic force microscopy (AFM) and energy-dispersive X-ray spectroscopy (EDX). To demonstrate the high potential of such polymer-modified cellulose materials, protein repellance of the cellulose films, containing peptidomimetic 2-methyl-2-oxazoline and zwitterionic phosphorylcholine groups after successful functionalization, is shown. Cell adhesion experiments using Bacillus subtilis, Escherichia coli and Saccharomyces cerevisiae indicate the considerable anti-fouling capacity against both Gram-positive and Gram-negatve bacteria as well as the yeast fungus.

5,5'-(Ethyne-1,2-di-yl)diisophthalic acid dimethyl sulfoxide tetra-solvate.

In the title compound, C18H10O8·4C2H6OS, the mid-point of the triple bond of the main mol-ecule is located on a special position, i.e. about an inversion center. The carboxyl groups are twisted slightly out of the planes of the aromatic rings to which they are attached, making dihedral angles of 24.89 (1) and 7.40 (2)°. The cystal packing features strong O-H⋯O hydrogen bonds, weaker C-H⋯O inter-actions and O⋯S contacts [3.0981 (11) Å] and displays channel-like voids extending along the a-axis direction which contain the dimethyl sulfoxide solvent mol-ecules.

High-separation performance of chromatographic capillaries coated with MOF-5 by the controlled SBU approach.

Recently developed MOF surface-coating techniques, the controlled SBU approach (CSA) for the generation of MOF-5, and the use of self-assembled monolayers have been combined to generate a wall-bonded, crosslinked stationary phase for gas chromatographic capillary columns displaying excellent performance in the separation of natural gas components. The chromatographic performance of this new type of column has been compared to the state-of-the-art solution for this separation problem, namely a coated silica column of the porous layer open tubular (PLOT) type. Chromatographic parameters such as separation, resolution, and tailing factors, as well as plate numbers and heights in the case of isothermal operation, have been determined. Kinetic and thermodynamic parameters characterizing the analyte-stationary phase interaction have been determined for various C1-C4 analytes.