Predominant P3-Type Solid-Solution Phase Transition Enables High-Stability O3-Type Na-Ion Cathodes.

Layered O3-type oxides are one of the most promising cathode materials for Na-ion batteries owing to their high capacity and straightforward synthesis. However, these materials often experience irreversible structure transitions at elevated cutoff voltages, resulting in compromised cycling stability and rate performance. To address such issues, understanding the interplay of the composition, structure, and properties is crucial. Here, we successfully introduced a P-type characteristic into the O3-type layered structure, achieving a P3-dominated solid-solution phase transition upon cycling. This modification facilitated a reversible transformation of the O3-P3-P3' structure with minimal and gradual volume changes. Consequently, the Na0.75Ni0.25Cu0.10Fe0.05Mn0.15Ti0.45O2 cathode exhibited a specific capacity of approximately 113 mAh/g, coupled with exceptional cycling performance (maintaining over 70% capacity retention after 900 cycles). These findings shed light on the composition-structure-property relationships of Na-ion layered oxides, offering valuable insights for the advancement of Na-ion batteries.

Engineering Reversible Lattice Structure for High-Capacity Co-Free Li-Rich Cathodes with Negligible Capacity Degradation.

Co-free Li-rich Mn-based cathode materials are garnering great interest because of high capacity and low cost. However, their practical application is seriously hampered by the irreversible oxygen escape and the poor cycling stability. Herein, a reversible lattice adjustment strategy is proposed by integrating O vacancies and B doping. B incorporation increases TM─O (TM: transition metal) bonding orbitals whereas decreases the antibonding orbitals. Moreover, B doping and O vacancies synergistically increase the crystal orbital bond index values enhancing the overall covalent bonding strength, which makes TM─O octahedron more resistant to damage and enables the lattice to better accommodate the deformation and reaction without irreversible fracture. Furthermore, Mott-Hubbard splitting energy is decreased due to O vacancies, facilitating electron leaps, and enhancing the lattice reactivity and capacity. Such a reversible lattice, more amenable to deformation and forestalling fracturing, markedly improves the reversibility of lattice reactions and mitigates TM migration and the irreversible oxygen redox which enables the high cycling stability and high rate capability. The modified cathode demonstrates a specific capacity of 200 mAh g-1 at 1C, amazingly sustaining the capacity for 200 cycles without capacity degradation. This finding presents a promising avenue for solving the long-term cycling issue of Li-rich cathode.

Slight Multielement Doping-Induced Structural Order-Disorder Transition for High-Performance Layered Na-Ion Oxide Cathodes.

To realize concurrently the high-energy density and excellent cycling stability, maximum utilization of redox couple, minimization of detrimental phase transition, and structural degradation of O3-type layered oxide cathodes are critical for developing Na-ion batteries. Ni2+/Ni4+ redox couple showing multielectron reaction and higher redox potential is favorable to increase the energy density. However, the Jahn-Teller distortion of Ni3+ generated upon (dis)charging results in a strong anisotropy in the local crystal structure that causes irreversible interlayer bending and chemo-mechanical cracks of the cathode particles, compromising the electrochemical properties eventually. In this work, we show a slight multielement doping strategy that enlarges the amount of active redox components while minimizing the inactive contents. The results show that the uniform distribution of multiple components can help increase the disorder degree of atom arrangement and alleviate the structural changes and detrimental anisotropy cracks. As a proof of concept, a multielement-doped O3-type Na0.9Ni0.25Cu0.05Mg0.05Zn0.05Fe0.05Al0.05Mn0.40Ti0.05Sn0.05O2 oxide is rationally prepared that presents better chemo-mechanical stability and delayed O3-P3 phase transition behavior. Compared to the high Ni-content Na0.9Ni0.35Fe0.2Mn0.45O2 cathode, this as-prepared multielement material delivers a reversible capacity of about 120 mAh/g in the voltage range of 2-4.0 V, superior cycling stability with 90% of capacity retention after 500 cycles, and excellent rate capability (more than 70% of initial capacity at 5.0 C). This work indicates that the multielement doping method is highly suitable for the development of advanced Na-ion layered oxide cathodes.

Manipulating of P2/O3 Composite Sodium Layered Oxide Cathode through Ti Substitution and Synthesis Temperature.

P2/O3 composite sodium layered oxide has emerged as a promising cathode for high-performance Na-ion batteries. However, it has been challenging to regulate accurately the phase ratio of P2/O3 composite due to their high compositional diversity, which brings about some difficulty in manipulating the electrochemical performance of P2/O3 composite. Here, we explore the effect of Ti substitution and the synthesis temperature on the crystal structure and Na storage performance of Na0.8Ni0.4Mn0.6O2. The investigation indicates Ti-substitution and altering synthesis temperature can rationally manipulate the phase ratio of P2/O3 composite, thereby purposefully regulating the cycling and rate performance of P2/O3 composite. Typically, O3-rich Na0.8Ni0.4Mn0.4Ti0.2O2-950 shows excellent cycling stability with a capacity retention of 84% (3C, 700 cycles). By elevating the proportion of P2 phase, Na0.8Ni0.4Mn0.4Ti0.2O2-850 displays concurrently improved rate capability (65% capacity retention at 5 C) and comparable cycling stability. These findings will help guide the rational design of high-performance P2/O3 composite cathodes for sodium-ion batteries.

Enabling an Excellent Ordering-Enhanced Electrochemistry and a Highly Reversible Whole-Voltage-Range Oxygen Anionic Chemistry for Sodium-Ion Batteries.

Though considerable Mg-doped layered cathodes have been exploited, some new differences relative to previous reports can be concluded by doping a heavy dose of Mg via two rational strategies. Unlike the common unit cell of the P63/mmc group by X-ray diffraction, neutron diffraction reveals a large supercell of the P63 group and enhanced ordering for Na11/18Mg1/18[Ni1/4Mg1/9Mn11/18]O2 with Mg occupying both the Na and Mn sites. Compared with only one obvious voltage plateau of Na0.5[Ni0.25Mn0.75]O2 (NNM), Na11/18Mg1/18[Ni1/4Mg1/9Mn11/18]O2 (NMNMM) shows more severe voltage plateaus but with excellent electrochemical performance. Na0.5[Mg0.25Mn0.75]O2 (NMM) with Mg only occupying the Ni site displays a highly reversible whole-voltage-range oxygen redox chemistry and smooth voltage curves without any voltage hysteresis. Cationic Ni2+/Ni4+ couples are responsible for the charge compensations of NNM and NMNMM, while only the oxygen anionic reaction accounts for the capacity of NMM between 2.5 and 4.3 V. Interestingly, the Mn3+/Mn4+ pair contributes all capacity for all cathodes between 1.5 and 2.5 V. All cathodes undergo a double-phase mechanism: an irreversible P2-O2 phase transition for NNM, an enhanced reversible P2-O2 phase transition for NMNMM, and a highly reversible P2-OP4 phase transition for NMM. In addition, the designed cathodes display excellent rate capability and long-term cycling stability but with a large difference in the various voltage ranges of 2.5-4.3 and 1.5-2.5 V, respectively. This work provides a good understanding of ion doping and some new insights into exploiting high-performance materials.

Unraveling the Synergistic Effect of Mg and Ti Codoping to Realize an Ordered Structure and Excellent Performance for Sodium-Ion Batteries.

Layered cathodes have been recognized as potential advanced candidates for sodium-ion batteries (SIBs), but the poor electrochemical performance has seriously hindered their further development. Herein, an ordered Na2/3[Ni2/9Mg1/9Mn5/9Ti1/9]O2 (NMMT) is designed and investigated as a high-performance cathode for SIBs through the synergistic effect of Mg and Ti codoping. Compared to the single Mg- or Ti-doped materials, NMMT clearly exhibits superstructure ordering diffraction peaks, and neutron diffraction further confirms that the diffraction peaks can be well indexed by a larger supercell P63, rather than the common unit cell P63/mmc by X-ray diffraction (XRD). High-resolution transmission electron microscopy also approves the ordering arrangement. This material shows an obvious capacity activation process during the first cycles, thus delivering 113 mA h g-1 specific capacity at 0.1 C (close to the theoretical value). Excellent rate capability even at 15 C and cycling stability after 500 cycles between 2.0 and 4.3 V can also be achieved, indicating that an ordered cathode is still promising. Besides, a single-phase reaction mechanism is revealed by ex situ/in situ XRD experiments. This study offers some insights into the material design and characterization of layered oxide cathodes for high-performance SIBs in the future.

Extreme Suppression of Antiferromagnetic Order and Critical Scaling in a Two-Dimensional Random Quantum Magnet.

Sr_{2}CuTeO_{6} is a square-lattice Néel antiferromagnet with superexchange between first-neighbor S=1/2 Cu spins mediated by plaquette centered Te ions. Substituting Te by W, the affected impurity plaquettes have predominantly second-neighbor interactions, thus causing local magnetic frustration. Here we report a study of Sr_{2}CuTe_{1-x}W_{x}O_{6} using neutron diffraction and µSR techniques, showing that the Néel order vanishes already at x=0.025±0.005. We explain this extreme order suppression using a two-dimensional Heisenberg spin model, demonstrating that a W-type impurity induces a deformation of the order parameter that decays with distance as 1/r^{2} at temperature T=0. The associated logarithmic singularity leads to loss of order for any x>0. Order for small x>0 and T>0 is induced by weak interplane couplings. In the nonmagnetic phase of Sr_{2}CuTe_{1-x}W_{x}O_{6}, the µSR relaxation rate exhibits quantum critical scaling with a large dynamic exponent, z≈3, consistent with a random-singlet state.

Large Linear Negative Thermal Expansion in NiAs-type Magnetic Intermetallic Cr-Te-Se Compounds.

A large linear negative thermal expansion (NTE) and expanded NTE temperature range (ΔTNTE) were obtained in magnetoelastic CrTe1-xSex (0 ≤ x ≤ 0.15) compounds. For CrTe compound, its thermal expansion coefficient of volume (αV) was calculated to be -28.8 ppm K-1 with the temperature ranging from 280 to 340 K. Substituting Te with Se atoms, the NTE behavior and magnetic properties can be well manipulated. With increasing Se in CrTe1-xSex (0 ≤ x ≤ 0.15) compounds, the ΔTNTE increases from 60 K (280-340 K for x = 0), to 80 K (240-320 K for x = 0.05), to 95 K (200-295 K for x = 0.1), and finally to 100 K (170-270 K for x = 0.15). Furthermore, a linear NTE remains independent of temperature for samples with x ≤ 0.1. The relationship between tunable NTE and magnetic properties was analyzed in detail, indicating that the NTE in CrTe1-xSex compounds originates from the magnetovolume effect (MVE).

The crystal structure and luminescence properties of a novel green-yellow emitting Ca1.5Mg0.5Si1-xLixO4-δ:Ce3+ phosphor with high quantum efficiency and thermal stability.

A novel green-yellow emitting Ca1.5Mg0.5Si1-xLixO4-δ:Ce3+ phosphor with high quantum efficiency and thermal stability was discovered for applications in near ultraviolet pumped white light-emitting diodes. Its crystal structure was determined with a single-particle diagnosis approach. The Si sites in the SiO4 tetrahedra are reported for the first time to accommodate Li+ ions. This substitution, confirmed by 6Li solid-state NMR and T.O.F. neutron powder diffraction, causes a disordered occupation of Ca/Mg in the Ca3MgSi2O8 host and favors a phase transformation at ∼330 °C, which results in the formation of the novel phosphor. The produced phosphor was efficiently excited by near UV light peaking at 365 and 410 nm and produced broad green-yellow emission with peaks at 500 and 560 nm, respectively. Its quantum efficiency reached 88.4% (internal) and 55.7% (external) under excitation at 365 nm, and 80.5% (internal) and 42.7% (external) under excitation at 410 nm, while the decrease of luminescence intensity at 200 °C was small (∼26%). A WLED lamp with a high color rendering index of Ra = 92.8 was produced with the combination of a 365 nm emitting chip with blue emitting BaMgAl10O17:Eu2+, green-yellow emitting CMSL:0.01Ce, and red emitting Sr2Si5N8:Eu2+ phosphors.