Homogeneous-like photocatalysis: covalent immobilization of an iridium(III) complex onto polystyrene brushes grafted on SiO2 nanoparticles as a mass/charge transfer-enhanced platform.

Current heterogeneous photocatalysis faces the major bottlenecks of limited mass transfer, charge recombination and tedious immobilization of expensive photocatalysts. In this work, fac-Ir(ppy)3 is directly anchored at a low cost via covalent linkage to poly(4-vinyl benzyl chloride) (PVBC) brushes grafted on SiO2 nanoparticles (PVBC@SiO2 NPs) via Friedel-Crafts alkylation, affording PVBC@SiO2 NP-supported fac-Ir(ppy)3 with high luminous efficacies such as emission lifetime and quantum yield. In the reductive cross-coupling of benzaldehydes/acetophenones with 1,4-dicyanobenzene (1,4-DCB), the as-fabricated photocatalyst affords benzhydrols in the same yields as homogeneous fac-Ir(ppy)3, except for o-substituted benzaldehydes/acetophenones. In terms of the same yields as homogeneous fac-Ir(ppy)3, a new catalytic model, named homogeneous-like photocatalysis, is proposed. In this catalytic model, the open stretching of PVBC brushes in DMSO enables the anchored fac-Ir(ppy)3 to catalyse the reaction in a similar manner as homogeneous fac-Ir(ppy)3, effectively avoiding charge recombination and mass transfer limitation. Furthermore, no significant decrease in yield (<5%) is observed over eight catalytic cycles, due to the good chemical and mechanical stabilities of PVBC@SiO2 NP-supported fac-Ir(ppy)3. Overall, the immobilization of fac-Ir(ppy)3 onto the PVBC brushes grafted on SiO2 NPs provides a mass/charge transfer-enhanced platform for supported photocatalysts.

Palladium(ii)-catalyzed oxidative C(sp3)-P bond formation via C(sp3)-H bond activation.

Disclosed herein is a Pd(ii)-catalyzed C(sp3)-H/P-H oxidative cross-coupling reaction between 8-methylquinolines with H-phosphonates or diarylphosphine oxides via chelation-assisted C(sp3)-H bond activation. The protocol exhibits a relatively broad functional-group tolerance and exclusive chemo- and regioselectivity. Furthermore, detailed mechanistic studies support the proposed reaction pathway.

Reactivity of a ß-diketiminate-supported magnesium alkyl complex toward small molecules.

The reactivity of the magnesium alkyl {[HC(C(Me)N-2,6-iPr2C6H3)2]Mg(nBu)}2 (1) toward various small molecules provides access to a variety of magnesium derivatives. For example, the insertion of elemental chalcogens (S8 and Se8) into the Mg-C bond of complex 1 gives the dimeric magnesium thiolate {[HC(C(Me)N-2,6-iPr2C6H3)2]Mg(µ-SnBu)}2 (2), magnesium selenolate [HC(C(Me)N-2,6-iPr2C6H3)2]Mg(SenBu)(THF) (3), and magnesium diselenolate [HC(C(Me)N-2,6-iPr2C6H3)2]Mg(Se2nBu)(THF) (4). Meanwhile, compound 4 can be readily obtained by further insertion of one selenium atom into complex 3. Moreover, the reactions of complex 1 with diphenyl dichalcogenides (PhSSPh and PhSeSePh) by σ bond metathesis afford the corresponding magnesium phenyl chalcogenolates [HC(C(Me)N-2,6-iPr2C6H3)2]Mg(EPh)(THF) (E = S 5, Se 6) concomitant with PhEnBu release. Furthermore, the treatment of complex 1 with benzonitrile and phenyl isothiocyanate produces the serendipitous magnesium-1-azaallyl complex [HC(C(Me)N-2,6-iPr2C6H3)2]Mg(N(H)C(Ph)[double bond, length as m-dash]CHC3H7)(DME) (7) and the diimino-thioamidato magnesium compound {κ3-N,N',N''-(ArNCMe)2[N(Ph)CS]CH}Mg[(Ph)NC(nBu)S] (8) (Ar = 2,6-iPr2C6H3). In addition, deprotonation occurs between compound 1 and 1-methylimidazole to generate the imidazolyl complex {[HC(C(Me)N-2,6-iPr2C6H3)2]Mg(µ-Im)}2 (9) (Im = 2-N-methylimidazolyl). These results indicated that the butylmagnesium complex 1 possesses high activity toward small molecules and revealed several unusual transformations. All the new compounds were characterized by various spectroscopic methods, and their solid-state structures were further confirmed by single-crystal X-ray diffraction analyses.

Silver-Catalyzed Oxidative C(sp3 )-P Bond Formation through C-C and P-H Bond Cleavage.

The silver-catalyzed oxidative C(sp3 )-H/P-H cross-coupling of 1,3-dicarbonyl compounds with H-phosphonates, followed by a chemo- and regioselective C(sp3 )-C(CO) bond-cleavage step, provided heavily functionalized ß-ketophosphonates. This novel method based on a readily available reaction system exhibits wide scope, high functional-group tolerance, and exclusive selectivity.

Photoresponsive surface molecularly imprinted polymer on ZnO nanorods for uric acid detection in physiological fluids.

A photoresponsive surface molecularly imprinted polymer for uric acid in physiological fluids was fabricated through a facile and effective method using bio-safe and biocompatible ZnO nanorods as a support. The strategy was carried out by introducing double bonds on the surface of the ZnO nanorods with 3-methacryloxypropyltrimethoxysilane. The surface molecularly imprinted polymer on ZnO nanorods was then prepared by surface polymerization using uric acid as template, water-soluble 5-[(4-(methacryloyloxy)phenyl)diazenyl]isophthalic acid as functional monomer, and triethanolamine trimethacryl ester as cross-linker. The surface molecularly imprinted polymer on ZnO nanorods showed good photoresponsive properties, high recognition ability, and fast binding kinetics toward uric acid, with a dissociation constant of 3.22×10(-5)M in aqueous NaH2PO4 buffer at pH=7.0 and a maximal adsorption capacity of 1.45µmolg(-1). Upon alternate irradiation at 365 and 440nm, the surface molecularly imprinted polymer on ZnO nanorods can quantitatively uptake and release uric acid.

Photoresponsive molecularly imprinted hydrogel casting membrane for the determination of trace tetracycline in milk.

This study aimed to develop a photoresponsive molecularly imprinted hydrogel (MIH) casting membrane for the determination of trace tetracycline (TC) in milk. This MIH casting membrane combined the specificity of MIHs, the photoresponsive properties of azobenzene, and the portable properties of a membrane. Photoresponsive TC-imprinted MIHs were initially fabricated and then cast on sodium dodecyl sulfonate polyacrylamide gel. After TC removal, a photoresponsive MIH casting membrane was obtained. The photoresponsive properties of the MIH casting membrane were robust, and no obvious photodegradation was observed after 20 cycles. The MIH casting membrane displayed specific affinity to TC upon alternate irradiation at 365 and 440 nm; it could quantitatively uptake and release TC. The TC concentration (0.0-2.0 × 10(-4) mol l(-1)) in aqueous solution displayed a linear relationship with the photoisomerization rate constant of azobenzene within the MIH casting membrane. As such, a quick detection method for trace TC in aqueous foodstuff samples was established. The recovery of this method for TC in milk was investigated with a simple pretreatment of milk, and a high recovery of 100.54-106.35% was obtained. Therefore, the fabricated membrane can be used as a portable molecular sensor that can be easily recycled.

Photocontrolled solid-phase extraction of guanine from complex samples using a novel photoresponsive molecularly imprinted polymer.

A novel photoresponsive molecularly imprinted polymer (MIP) was developed for the selective extraction of guanine from complex samples. The photoresponsive MIP was fabricated using guanine as the template, water-soluble 5-[(4-(methacryloyloxy)phenyl)diazenyl]isophthalic acid as the functional monomer, and water-soluble triethanolamine trimethacrylate as the cross-linker. The MIP displayed good selectivity toward guanine with a dissociation constant of (2.70 ± 0.16) × 10(-5) mol L(-1) in aqueous media. The density of the guanine-specific receptor sites in the MIP material was (4.49 ± 0.22)µmol g(-1). Quantitatively release and uptake of guanine by the MIP occurred with irradiation at 365 and 440 nm, respectively. The MIP could efficiently extract guanine from beer and then release it into aqueous media under photocontrol. This method could be used for selective separation and subsequent determination of a specific analytes from complex samples.

9-Amino-(9-deoxy)cinchona alkaloid-derived new chiral phase-transfer catalysts.

A new class of 9-amino-(9-deoxy)cinchona alkaloid-derived chiral phase-transfer catalysts bearing amino groups was developed by using known cinchona alkaloids as the starting materials. Due to the transformation of the 9-hydroxyl group into a 9-amino functional group, the catalytic performances were significantly improved in comparison with the corresponding first generation phase-transfer catalysts, and excellent yields (92-99%) and high enantioselectivities (87-96% ee) were achieved in the benchmark asymmetric α-alkylation of glycine Schiff base. Based on the special contribution of the amino group to the high yield and enantioselectivity, the possible catalytic mechanism was conjectured.

Graphene-cyclodextrin-cytochrome c layered assembly with improved electron transfer rate and high supramolecular recognition capability.

This study aimed to develop a new graphene-based layered assembly, named graphene-cyclodextrin-cytochrome c with improved electron transfer rate. This assembly has combined high conductivity of graphene nanosheets (GNs), selectively binding properties and electronegativity of cyclodextrins (CDs), as well as electropositivity of cytochrome c (Cyt c). This assembly can also mimic the confined environments of the intermembrane space of mitochondria. A ß-cyclodextrin (ß-CD) functionalized GN (GN-CD) assembly was initially prepared by a simple wet-chemical strategy, i.e., in situ thermal reduction of graphene oxide with hydrazine hydrate in the presence of ß-CD. Cyt c was then intercalated to the GN-CD assembly to form a layered self-assembled structure, GN-CD-Cyt c, through electrostatic interaction. Compared with GNs and GN-CD, GN-CD-Cyt c assembly displayed improved electron transfer rate and high supramolecular recognition capability toward six probe molecules.

Anchored [RuCl2(p-cymene)]2 in hybrid zirconium phosphate-phosphonate coated and pillared with double-stranded hydrophobic linear polystyrene as heterogeneous catalyst suitable for aqueous asymmetric transfer hydrogenation.

A novel type of phosphonate-containing polystyrene copolymers 1a-e bearing an N'-alkylated TsDPEN chiral ligand and double-stranded polystyrene chains were prepared for the first time using simple radical copolymerization of 1-phosphonate styrene with (R,R)-N'-4'-vinylbenzyl-N-4-vinylbenzenesulfonyl-1,2-diphenylethylene-1,2-diamine. Through the coprecipitation of their supported Ru polystyrene copolymers 2a-e and NaH2PO4 with ZrOCl2, pillared hybrid zirconium phosphate-phosphonate-anchored Ru catalysts 3a-e and 4d1-d5 were obtained as heterogeneous catalysts suitable for aqueous asymmetric transfer hydrogenation. In the aqueous asymmetric transfer hydrogenation of aromatic ketones, the anchored Ru catalysts showed good catalytic activities, chemoselectivities (~100%), and enantioselectivities (73.6% ee to 95.6% ee). The Ru catalysts retained their catalytic properties even at the fifth recycle time (92.2% conv., 92.1% ee). However, corresponding supported Ru catalyst 3d' resulted in disappointing reusability because of the loss of ruthenium in every recycle process. The conversions of aromatic ketones were closely related to the o-, m- or p-positions of the substituents on the aromatic ring caused by shape-selective matching.

Copolymer-supported heterogeneous organocatalyst for asymmetric aldol addition in aqueous medium.

In the current study, a convenient and simple way is presented to synthesize a novel type of supported heterogeneous organocatalyst in 21-81% yield by the copolymerization of 9-amino-9-deoxy-epi-cinchonine organocatalyst with acrylonitrile using AIBN as radical initiator. The chemical compositions (x/y) and weight-average molecular weights of copolymers 1a-d were determined by (1)H NMR and GPC analysis respectively. Their porous and layered structure, and surface morphology were characterized by nitrogen adsorption-desorption, XRD and TEM. In the asymmetric aldol addition of p-nitrobenzaldehyde to cyclohexanone and 1-hydroxy-2-propanone in water, all the supported organocatalysts 1a-d afforded excellent isolated yields (90.2-94.7%) and stereoselectivities (96.8-97.8%ee anti, anti/syn = 91/9). The highest catalytic property (96% yield, anti/syn = 90/10 and 99%ee anti) in water as the sole solvent was achieved under the optimized conditions. Compared with cyclohexanone, cyclopentanone and acetone showed the less desired enantioselectivities in the same aldol reactions. At the end of the aldol reaction, the copolymer-supported organocatalyst 1a was readily recovered in 95-98% yield from reaction mixture by simple filtration using an organic membrane. Even in the fifth run, there was no significant loss in catalytic activity and stereocontrol (94.3% yield, 97.2%ee anti, anti/syn = 90/10). After continuous reuse five times, there was some drop in catalytic activity and stereoselectivity.

Preparation and confinement effect of a heterogeneous 9-amino-9-deoxy-epi-cinchonidine organocatalyst for asymmetric aldol addition in aqueous medium.

A series of novel porous zirconium phosphonate-supported 9-amino-9-deoxy-epi-cinchonidines of general formulae Zr(OH)(4-2x)(O(3)PR)(x)·nH(2)O and Zr(HPO(4))(2-x)(O(3)PR)(x)·nH(2)O with the different arm chain lengths (n = 2-6) and mean diameters of approximately 20-40 nm have been prepared as heterogeneous organocatalysts. The different microtextures of zirconium phosphonates were also obtained by using template guest molecules, such as Et(3)N, NaH(2)PO(4) and sodium dodecyl benzene sulfonate. In the heterogeneous asymmetric aldol addition of p-nitrobenzaldehyde to cyclohexanone, excellent catalytic properties were achieved, especially in an aqueous medium. After completing the reaction, those zirconium phosphonate-supported 9-amino-9-deoxy-epi-cinchonidine organocatalysts could be readily recovered in quantitative yield by centrifugation or filtration, and reused for five consecutive runs without significant loss in catalytic performance. In particular, due to the steric confinement effect of the inorganic backbone, the single different configuration among possible four stereo-isomers in aldol adducts were favorably obtained, respectively depending on the interaction between the o-, m- or p-position of nitrobenzaldehyde and the backbone, which was never observed in homogeneous aldol addition.

Organosoluble zirconium phosphonate nanocomposites and their supported chiral ruthenium catalysts: the first example of homogenization of inorganic-supported catalyst in asymmetric hydrogenation.

In this article, we report the synthesis, structure, morphologies, and asymmetric catalytic properties of a series of novel organosoluble zirconium phosphonate nanocomposites and their supported chiral ruthenium catalysts, which have a good organosolubility (0.1-0.5 g mL(-1)) in various solvents and mesoporous, filiform, and layered structures. Due to the organosoluble properties in various organic solvents, the first homogenization of zirconium phosphonate-supported catalyst was realized in the field of catalysis. In the asymmetric hydrogenation of substituted α-ketoesters, enantioselectivities (74.3-84.7% ee) and isolated yields (86.7-93.6%) were higher than the corresponding homogeneous Ru(p-cymene)(S-BINAP)Cl(2) due to the confinement effect caused by the remaining mesopores in the backbone of the zirconium phosphonate. After completing the reaction, the supported catalyst can be readily recovered in quantitative yield by adding cyclohexane and centrifugation, and reused for five consecutive runs without significant loss in catalytic activity.