ABSTRACT
In this study, three-dimensional (3D) networked porous polyvinyl alcohol/sodium alginate/graphene oxide (PVA/SA/GO) spherical composites were fabricated by the sol-gel method and employed as adsorbents for the adsorption of methylene blue (MB) in aqueous solution. The obtained samples were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermal property analysis, and nitrogen adsorption/desorption isotherms. Moreover, the adsorption properties for MB were investigated by batch experiments. The pseudo-first-order and pseudo-second-order equations were used to fit the adsorption kinetics data, and the Langmuir and Freundlich isothermal models were used to analyze the adsorption isothermals. The results showed that the spherical composites had 3D porous structures, and GO, PVA and SA were fused and linked together by self-assembly, physical intertwining, hydrogen bonding, and Ca2+ and boric acid crosslinking. The maximum adsorption capacity of the 3D porous PVA/SA/GO spherical composites for MB was 759.3 mg/g. The adsorption kinetics had a better agreement with the pseudo-secondorder equation than the pseudo-first-order equation, and the equilibrium data followed the Freundlich model.
ABSTRACT
In this study, using several types of acidic ionic liquids as the leaching reagents, the leaching behaviors of the copper present in waste printed circuit boards (WPCBs) were investigated. The effects of various parameters on the copper leaching rate were studied, such as the particle size of the shredded WPCB, type of ionic liquid used, hydrogen peroxide dosage, solid-to-liquid ratio, leaching temperature, and leaching time. The experimental results showed that the copper leaching rate increases continuously when the powder particle size is increased from 0.071 to 0.500â¯mm. Moreover, the copper leaching rate also increases with an increase in the leaching temperature. In contrast, the leaching rate first increases and then decreases with increases in the leaching time, hydrogen peroxide dosage, and solid-to-liquid ratio. The optimal conditions that provided a 98.31% copper leaching rate were: particle size >0.500â¯mm, 8.5â¯mL 90% (v/v) ionic liquid, 1.5â¯mL 30% hydrogen peroxide, solid-to-liquid ratio of 1/20, leaching temperature of 80⯰C, and leaching time of 2â¯h.
ABSTRACT
In this paper, using maleic anhydride and ethylenediamine as functional monomers, graphene oxide (GO) loaded magnetic Fe3O4 nanoparticles modified by (3-Aminopropyl) triethoxysilane as support, magnetic graphene oxide grafted polymaleicamide dendrimer (GO/Fe3O4-g-PMAAM) nanohybrids were fabricated by divergent method and magnetic separation technology. The obtained samples were characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, elementary analyzer and vibrating sample magnetometer. The effects of PMAAM generations, solution pH, Pb(II) initial concentration, temperature and contact time on the adsorption property of the samples for Pb(II) in aqueous solution were studied. The results demonstrated that nitrogen content and adsorption capacity of the as-synthesized samples with amino terminal groups were all higher than their adjacent generations PMAAM with carboxyl terminal groups. Moreover, with increasing generations of PMAAM grafted on to the GO/Fe3O4, the nitrogen content and the adsorption capacity of the samples with the same terminal groups gradually increased. The maximum adsorption capacity of GO/Fe3O4-g-G3.0 for Pb(II) was 181.4mgg-1 at 298K. The rising of temperature was beneficial for the adsorption. The adsorption kinetics had a better agreement with pseudo-second-order equation, and equilibrium data followed the Langmuir model.
ABSTRACT
In this study, using graphene oxide supported Fe3O4 nanoparticles as carriers, ethylenediamine and methyl acrylate as functional monomer, different generations of polyamidoamine dendrimers functionalized magnetic graphene oxide (MGO-PAMAM), up to generation 4.0, were successfully synthesized via step by step growth chemical grafting approach and magnetic separation technology. In the process of synthesizing dendrimers, the generation of dendrimers was increased with the increasing of reaction cycles. In other words, the dendrimers generation is determined from the number of branch iterations. The obtained MGO-PAMAM were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), elemental analysis, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), nitrogen adsorption/desorption isotherm and Zeta potential analysis. The adsorption properties of the synthesized products for Hg(II) in aqueous solution were investigated by batch experiments. The results showed that the MGO-PAMAM with generation 3.0 of dendrimers (MGO-PAMAM-G3.0) has the maximum adsorption capacity of 113.71mg·g-1. The adsorption process of MGO-PAMAM-G3.0 for Hg(II) was well described by the pseudo-second-order kinetics model and the Langmuir isotherm model. The Hg(II) adsorbed on the surface of MGO-PAMAM-G3.0 was reduced to Hg(I) in the adsorption process. In addition, the MGO-PAMAM possesse good magnetic separation performance.
