A Liquid Mirror Resonator.

We present the first experimental demonstration of a Fabry‒Perot resonator that utilizes total internal reflection from a liquid-gas interface. Our hybrid resonator hosts both optical and capillary waves that mutually interact. Except for the almost perfect reflection by the oil-air interface at incident angles smaller than the critical angle, reflections from the liquid-phase boundary permit optically examining thermal fluctuations and capillary waves at the oil surface. Characterizing our optocapillary Fabry‒Perot reveals optical modes with transverse cross-sectional areas of various shapes and longitudinal modes that are separated by the free spectral range. The optical finesse of our hybrid optocapillary resonator is Fo = 60, the optical quality factor is Qo = 20 million, and the capillary quality factor is Qc = 6. By adjusting the wavelength of our laser near the optical resonance wavelength, we measure the liquid's Brownian fluctuations. As expected, the low-viscosity liquid exhibits a distinct frequency of capillary oscillation, indicating operation in the underdamped regime. Conversely, going to the overdamped regime reveals no such distinct capillary frequency. Our optocapillary resonator might impact fundamental studies and applications in surface science by enabling optical interrogation, excitation, and cooling of capillary waves residing in a plane. Moreover, our optocapillary Fabry‒Perot might permit photographing thermal capillary oscillation, which the current state-of-the-art techniques do not support.

Design and Fabrication of an Optical Fiber Made of Water.

In this report, an optical fiber of which the core is made solely of water, while the cladding is air, is designed and manufactured. In contrast with solid-cladding devices, capillary oscillations are not restricted, allowing the fiber walls to move and vibrate. The fiber is constructed by a high direct current (DC) voltage of several thousand volts (kV) between two water reservoirs that creates a floating water thread, known as a water bridge. Through the choice of micropipettes, it is possible to control the maximal diameter and length of the fiber. Optical fiber couplers, at both sides of the bridge, activate it as an optical waveguide, allowing researchers to monitor the water fiber capillary body waves through transmission modulation and, therefore, deducing changes in surface tension. Co-confining two important wave types, capillary and electromagnetic, opens a new path of research in the interactions between light and liquid-wall devices. Water-walled microdevices are a million times softer than their solid counterparts, accordingly improving the response to minute forces.

Cavity optofluidics: a µdroplet's whispering-gallery mode makes a µvortex.

We experimentally demonstrate light-flow interaction, in which the angular momentum of circulating light excites micro-vortices. In contrast with the solid-phase of matter, where one has to overcome static friction in order to start motion, liquids have no "static drag." Relevant to almost all optofluidic micro-systems hence, µWatt optical power is sufficient to start flows, even in liquids 50 times more viscous than water. We map the flows to be three-dimensional (3D) by using a technique based on fluorescent nano-emitters; to reveal, as expected, flow speeds proportional to power divided by viscosity.

Flying couplers above spinning resonators generate irreversible refraction.

Creating optical components that allow light to propagate in only one direction-that is, that allow non-reciprocal propagation or 'isolation' of light-is important for a range of applications. Non-reciprocal propagation of sound can be achieved simply by using mechanical components that spin1,2. Spinning also affects de Broglie waves 3 , so a similar idea could be applied in optics. However, the extreme rotation rates that would be required, owing to light travelling much faster than sound, lead to unwanted wobbling. This wobbling makes it difficult to maintain the separation between the spinning devices and the couplers to within tolerance ranges of several nanometres, which is essential for critical coupling4,5. Consequently, previous applications of optical6-17 and optomechanical10,17-20 isolation have used alternative methods. In hard-drive technology, the magnetic read heads of a hard-disk drive fly aerodynamically above the rapidly rotating disk with nanometre precision, separated by a thin film of air with near-zero drag that acts as a lubrication layer 21 . Inspired by this, here we report the fabrication of photonic couplers (tapered fibres that couple light into the resonators) that similarly fly above spherical resonators with a separation of only a few nanometres. The resonators spin fast enough to split their counter-circulating optical modes, making the fibre coupler transparent from one side while simultaneously opaque from the other-that is, generating irreversible transmission. Our setup provides 99.6 per cent isolation of light in standard telecommunication fibres, of the type used for fibre-based quantum interconnects 22 . Unlike flat geometries, such as between a magnetic head and spinning disk, the saddle-like, convex geometry of the fibre and sphere in our setup makes it relatively easy to bring the two closer together, which could enable surface-science studies at nanometre-scale separations.

Light and Capillary Waves Propagation in Water Fibers.

The confinement of light and sound, while they are traveling in fibers, enables a variety of light-matter interactions. Therefore, it is natural to ask if fibers can also host capillary waves. Capillary waves are similar to those we see when throwing a stone into a puddle. Such capillary waves are prohibited in microfluidic devices where the liquid is bounded by solid walls. In contrast, we have fabricated fibers, which are made entirely from water and are suspended in air. The water fiber can therefore move, e.g. in a resonant mode that reassembles the motion of a guitar string. In our experiment, light guided through the water fiber allows optical interrogation of is capillary oscillations. Co-confining two important oscillations in nature: capillary and electromagnetic, might allow a new type of devices called Micro-Electro-Capillary-Systems [MECS]. The softness of MECS is a million times higher when compared to what the current solid-based technology permits, which accordingly improves MECS response to minute forces such as small changes in acceleration. Additionally, MECS might allow new ways to optically interrogate viscosity and surface tension, as well as their changes caused by introducing an analyte into the system.

Regular oscillations and random motion of glass microspheres levitated by a single optical beam in air.

We experimentally report on optical binding of many glass particles in air that levitate in a single optical beam. A diversity of particle sizes and shapes interact at long range in a single Gaussian beam. Our system dynamics span from oscillatory to random and dimensionality ranges from 1 to 3D. The low loss for the center of mass motion of the beads could allow this system to serve as a standard many body testbed, similar to what is done today with atoms, but at the mesoscopic scale.

Regular oscillations and random motion of glass microspheres levitated by a single optical beam in air: publisher's note.

This publisher's note amends a recent publication [Opt. Express24(3), 2850-2857 (2016)] to include Acknowledgments.

Water-walled microfluidics for high-optical finesse cavities.

In submerged microcavities there is a tradeoff between resonant enhancement for spatial water and light overlap. Why not transform the continuously resonating optical mode to be fully contained in a water microdroplet per se? Here we demonstrate a sustainable 30-µm-pure water device, bounded almost completely by free surfaces, enabling >1,000,000 re-circulations of light. The droplets survive for >16 h using a technique that is based on a nano-water bridge from the droplet to a distant reservoir to compensate for evaporation. More than enabling a nearly-perfect optical overlap with water, atomic-level surface smoothness that minimizes scattering loss, and ∼99% coupling efficiency from a standard fibre. Surface tension in our droplet is 8,000 times stronger than gravity, suggesting a new class of devices with water-made walls, for new fields of study including opto-capillaries.

Optical binding in white light.

We experimentally demonstrate, for the first time, binding of aerosols of various sizes and shapes in white light. The optomechancial interaction between particles is long range and is in the underdamped regime. Incoherency allows mitigation of interference fringes to enable monotonically changing the distance between particles from 60 µm to contact, constituting a parametrically controlled testbed for transition studies at new scales.

Rashba-type plasmonic metasurface.

Observation of the plasmonic Rashba effect manifested by a polarization helicity degeneracy removal in a surface wave excitation via an inversion asymmetric metamaterial is reported. By designing the metasurface symmetry using anisotropic nanoantennas with space-variant orientations, we govern the light-matter interaction via the local field distribution arising in a wavelength and a photon spin control. The broken spatial inversion symmetry is experimentally manifested by a directional excitation of surface wave jets observed via a decoupling slit as well as by the quantum dot fluorescence. Rashba-type plasmonic metasurfaces provide a route for spin-based nanoscale devices controlled by the metamaterial symmetry and usher in a new era of light manipulation.