Effect of disinfectants on multispecies biofilm, the physical and mechanical properties of polymethyl methacrylate, and the corrosion of cobalt chromium alloy.

STATEMENT OF PROBLEM: The optimal disinfection protocol that controls adverse effects and promotes effective antimicrobial action on removable prostheses is unclear. PURPOSE: This in vitro study investigated the effect of disinfectant solutions on the biological, physical, mechanical, and chemical properties of removable prosthesis materials. MATERIAL AND METHODS: Specimens of polymethyl methacrylate (PMMA) and cobalt chromium (Co-Cr) alloy were immersed in distilled water (PMMA) or artificial saliva (Co-Cr) as the control and in 0.25% sodium hypochlorite (NaOCl0.25%), 0.5% chloramine T (CT0.5%), and 0.15% Triclosan (TR0.15%). The antibiofilm activity was evaluated by microbial load and cell metabolisms of the mixed biofilm. Physical (color change, sorption, solubility, and surface roughness), mechanical (hardness, flexural, and impact strength), and chemical (corrosion) properties were analyzed before and after simulating a 5-year immersion. Laser confocal microscopy, scanning electron microscopy (SEM), and dispersive energy spectroscopy (EDS) complemented the analyses. The data were analyzed by using the Mann-Whitney U test, Kruskal-Wallis with Dunn posttests, 1-way ANOVA, and repeated measures ANOVA (α=.05). RESULTS: All solutions were effective against bacteria, but only NaOCl0.25% eliminated Candida spp. TR0.15%, and CT0.5% increased cell metabolisms. For interaction (time and solution), there was a reduction in PMMA hardness in the control and TR0.15%. Color, sorption, solubility, and flexural strength did not change. CT0.5% and TR0.15% were similar for impact resistance. CT0.5% caused the lowest roughness. NaOCl0.25% showed the greatest corrosive potential. Dark spots were seen under SEM in Co-Cr stored with NaOCl0.25% and TR0.15%. EDS indicated different proportions of oxygen, cobalt, chromium, and molybdenum. CONCLUSIONS: NaOCl0.25% had the best antimicrobial action. CT0.5% and TR0.15% have potential. Hardness and roughness changes were clinically acceptable, and the other properties remained unchanged. All the solutions caused color changes. NaOCl0.25% was unsatisfactory for use with Co-Cr, CT0.5% was intermediate, and TR0.15% was suitable.

Dielectric Characterization of Solutions of Galactomannan Extracted from Adenanthera pavonina L.: Effects of Purification and Ethanol Concentration.

Galactomannans are polysaccharides obtained from legume seed extraction. They present a chemical structure consisting of D-mannose chains linked by glycosidic bonds and galactose branches. The main focus lies in their use as thickeners in the food industry, aimed at improving the dielectric properties of food during heating processes within the radiofrequency and microwave ranges. In this work, the prepared galactomannan samples were electrically analyzed through impedance spectroscopy, which is a powerful physical technique. From the experimental measurements, the dielectric permittivity and loss tangent of the galactomannan solutions were analyzed and the electrical modulus formalism was used to study the dielectric relaxations. Crude galactomannans exhibited higher values of permittivity, conductivity, and losses compared to purified galactomannans. Increasing ethanol concentration in galactomannan purification causes an increase in the permittivity and conductivity of galactomannan solutions. In a 1% solution, at 1 kHz, the permittivity increased from 378.56 to 538.09, while in the 2% solution, this increase was from 656.22 to 1103.24. Regarding the conductivity, at the same frequency, the increase was from 1.6 × 10-3 to 3.3 × 10-3 Ω-1m-1 and from 2.9 × 10-3 to 5.5 × 10-3 Ω-1m-1, respectively. The rise of the ethanol concentration in galactomannan purification led to a decrease in the relaxation time, from 448.56 to 159.15 µs and from 224.81 to 89.50 µs in the solution with 1 and 2%, respectively. The results suggest that galactomannan from Adenanthera pavonina L. has potential for use in the food industry.

Effectiveness of experimental dentifrices based on essential oils on biofilm on complete dentures: an in vitro study.

Specific products containing natural resources can contribute to the innovation of complete denture hygiene. OBJECTIVE: To conduct an in vitro evaluation of experimental dentifrices containing essential oils of Bowdichia virgilioides Kunth (BvK), Copaifera officinalis (Co), Eucalyptus citriodora (Ec), Melaleuca alternifolia (Ma) and Pinus strobus (Ps) at 1%. METHODOLOGY: The variables evaluated were organoleptic and physicochemical characteristics, abrasiveness (mechanical brushing machine) simulating 2.5 years, and microbial load (Colony Forming Units - CFU/mL), metabolic activity (XTT assay) and cell viability (Live/Dead® BacLight™ kit) of the multispecies biofilm (Streptococcus mutans: Sm, Staphylococcus aureus: Sa, Candida albicans: Ca and Candida glabrata: Cg). Specimens of heat-polymerized acrylic resins (n=256) (n=96 specimens for abrasiveness, n=72 for microbial load count, n=72 for biofilm metabolic activity, n=16 for cell viability and total biofilm quantification) with formed biofilm were divided into eight groups for manual brushing (20 seconds) with a dental brush and distilled water (NC: negative control), Trihydral (PC: positive control), placebo (Pl), BvK, Co, Ec, Ma or Ps. After brushing, the specimens were washed with PBS and immersed in Letheen Broth medium, and the suspension was sown in solid specific medium. The organoleptic characteristics were presented by descriptive analysis. The values of density, pH, consistency and viscosity were presented in a table. The data were analyzed with the Wald test in a generalized linear model, followed by the Kruskal-Wallis test, Dunn's test (mass change) and the Bonferroni test (UFC and XTT). The Wald test in Generalized Estimating Equations and the Bonferroni test were used to analyze cell viability. RESULTS: All dentifrices showed stable organoleptic characteristics and adequate physicochemical properties. CN, Ec, Ps, Pl and PC showed low abrasiveness. There was a significant difference between the groups (p<0.001) for microbial load, metabolic activity and biofilm viability. CONCLUSIONS: It was concluded that the BvK, Ec and Ps dentifrices are useful for cleaning complete dentures, as they have antimicrobial activity against biofilm. The dentifrices containing Bowdichia virgilioides Kunth showed medium abrasiveness and should be used with caution.

Effects of Different Weekly Set Volumes on Strength and Perceptual Responses in Athletes.

This study investigated the effects of different resistance training (RT) volumes quantified by weekly sets at high intensity (load and effort) on dynamic strength adaptations and psychophysiological responses in trained individuals. Twenty-four athletes were randomly allocated to three groups that performed three (3 S, n=8), six (6 S, n=8), and nine (9 S, n=8) weekly sets, respectively, three times a week on the barbell back squat and bench press during an 8-week period. While all groups showcased strength gains (p<0.05), post hoc comparisons revealed that 6 S and 9 S elicited greater strength adaptations than 3 S in barbell back squat (p=0.027 and p=0.004, respectively) and bench press (p=0.001 and p=0.044, respectively). There were no differences between 6 S and 9 S conditions for back squat (p=0.999) and bench press (p=0.378). Although a time effect was observed for Session-RPE (p=0.014) and Total Quality Recovery scale (p=0.020), psychophysiological responses were similar among groups. Our findings suggest that performing six and nine weekly sets at high intensities led to greater strength gains compared to three weekly sets in strength-trained individuals, despite similar psychophysiological responses.

Evaluation of surface roughness, wettability and adhesion of multispecies biofilm on 3D-printed resins for the base and teeth of complete dentures.

OBJECTIVE: This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). METHODOLOGY: Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). RESULTS: The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. CONCLUSION: The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

Unlocking the power of Libidibia ferrea extracts: antimicrobial, antioxidant, and protective properties for potential use in poultry production.

Plant extracts are increasingly recognized as potential prophylactic agents in poultry production due to their diverse bioactive properties. This study investigated the phytochemical and biological properties of Libidibia ferrea (L. ferrea), a plant species native to the Caatinga region of northeastern Brazil. The aim of this study was to identify secondary metabolites and to demonstrate the antimicrobial, antioxidant and protective effects of the plant extract. Three extracts were produced: EHMV, a hydroalcoholic extract from the maceration of pods, and EEMC and EEMV ethanolic extracts from the maceration of peels and pods, respectively, from L. ferrea. High-performance liquid chromatography (HPLC-MS/MS) and atomic absorption spectroscopy (AAS) were used to characterize the metabolites and metals. The antimicrobial activity against Salmonella Galinarum (SG), Salmonella pullorum (SP), Salmonella Heidelberg (SH) and Avian pathogenic Escherichia coli (APEC) was evaluated alone and in combination with probiotic bacteria (Bacillus velenzensis) using agar diffusion and the bactericidal minimum concentration (CBM). The antioxidant potential of the extracts was evaluated in 5 in vitro assays and 6 assays in 3t3 cells. The toxicity of EHMV was tested, and its ability to combat SP infection was demonstrated using a chicken embryo model. The results showed that EHMV exhibited significant antimicrobial activity. The combination of EHMV with BV had synergistic effects, increased antimicrobial activity and induced bacterial sporulation. Composition analysis revealed the presence of 8 compounds, including tannins and phenolic compounds. In vitro antioxidant tests demonstrated that total antioxidant capacity(TAC) activity was increased, and the extract had strong reducing power and notable metal chelating effects. Analysis of 3T3 cells confirmed the protective effect of EHMV against oxidative stress. Toxicity assessments in chicken embryos confirmed the safety of EHMV and its protective effect against SP-induced mortality. EHMV from L. ferrea is rich in proteins and contains essential metabolites that contribute to its antimicrobial and antioxidant properties. When associated with probiotic bacteria such as B. velezensis, this extract increases the inhibition of SH, SG, SP, and APE. The nontoxic nature of EHMV and its protective effects on chicken embryos make it a potential supplement for poultry.

Sleep Disorders and Subjective Well-Being in Portuguese Adults: Evidence from a Representative Study.

Objective The quality and quantity of sleep affect people's well-being, as chronic sleep disorders are associated with social, physical, and psychological problems, as well as low self-reported life satisfaction. The present cross-sectional study examined the associations of sleep disorders with self-reported life satisfaction in Portuguese adults. Materials and Methods Data from a representative sample of the Portuguese population (14,341 participants, aged ≥ 18 years) extracted from the Sixth Portuguese National Health Survey was analyzed. Data on subjective well-being and sleep disorders was collected through a questionnaire, and multivariable regression models were performed to examine the associations between these variables, adjusted for potential confounders such as age, gender, level of schooling, degree of urbanization, and family income. Results Sleep disorders were negatively associated with self-reported life satisfaction. Having at least one sleep disturbance in the last two weeks was significantly associated with a 3-point decrease in life satisfaction: ß = -3.0 (95% confidence interval = -3.2--2.7). Discussion Among Portuguese adults, sleep disorders were associated with a decline in life satisfaction. The present study provides new evidence from a representative sample to support the promotion of good sleep hygiene intervention programs.

Obstructive Sleep Apnea Syndrome in Heavy Truck Drivers: A Portuguese Prospective Cohort Study.

INTRODUCTION: Heavy truck drivers with untreated obstructive sleep apnea (OSA) are at higher risk of driving accidents. This study aims to estimate the prevalence of OSA and to identify the most frequent symptoms and comorbidities in heavy truck drivers. METHODS: This cohort study included the employees of a Portuguese transport company between 2019 and 2022. A home sleep apnea test (HSAT) was performed on all patients. SPSS® was used for statistical analysis, and a p-value lower than 0.05 was considered statistically significant. RESULTS: A total of 86 truck drivers were included, with a mean age of 48.02 years (min. 24, max 66) and a mean body mass index (BMI) of 30.14±4.4 kg/m². After performing an HSAT, it was found that 77.9% of drivers (n=67) had OSA, with a mean apnea-hypopnea index (AHI) of 16.72±14.69 events/hour. Concerning diagnosed patients, 44.78% (n=30) had mild, 31.32% (n=23) moderate, and 20.89% (n=14) severe OSA. Obesity, hypertension, and dyslipidemia had a statistically significant association. There were no statistically significant differences between patients with and without type II diabetes mellitus. The presence of nighttime and daytime symptoms had a statistically significant correlation with OSA diagnosis. Despite only eight patients reporting a high score on the Epworth Sleepiness Scale (ESS), 14 patients reported previous episodes of falling asleep while driving, which might be associated with the non-valorization of daytime sleepiness in these patients. The patients who reported previous episodes of falling asleep while driving were older and had higher BMI, higher ESS, and higher AHI. CONCLUSIONS: In the evaluated truck drivers, the prevalence of OSA was very high (77.9%), which reinforces the importance of screening for this pathology since, when left untreated, it is a major risk factor for exercising their profession safely.

DHA and EPA in Sickle Cell Disease Favor Clinical Improvement and Contribute to Better Quality of Life: A Qualitative Systematic Review.

BACKGROUND: Sickle cell disease is a severe genetic disorder, and searching for therapeutic strategies is indispensable for prolonged and improved life for people affected by this condition. OBJECTIVE: This qualitative systematic review aimed to highlight the therapeutic potential of omega- 3 (n-3) in people with sickle cell disease. METHODS: The search was performed by combining sickle cell disease and n-3 descriptors in DeCS/ MeSH databases, including Scopus, PubMed, ScienceDirect, Web of Science, and Virtual Health Library. The risk of bias assessment in the primary studies was performed using the Cochrane risk of bias tool for randomized controlled trials. The evidence quality was evaluated using the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) tool. RESULTS: From the 187 records identified, seven were selected for data collection. Based on the evidence, n-3 supplementation contributes to lower activation of pro-inflammatory biomarkers, improves the concentration of docosahexaenoic and eicosapentaenoic acids in the erythrocyte membrane, provides better hemostatic response, and helps in vaso-occlusive crisis, pain episodes, and hospitalization reduction. CONCLUSION: The findings suggest that n-3 adjuvant therapy favors the clinical and general aspects of people with sickle cell disease.

Cafeteria Diet Can Affect Bone Microarchitecture in Sedentary and Trained Male Rats.

INTRODUCTION: Poor eating habits and a sedentary lifestyle can impair health. Regular physical activity improves the quality of life and is essential for bone health. Therefore, the present study aimed to evaluate the effects of the cafeteria diet on bone quality of sedentary and exercised rats. METHODS: Sixty young male Wistar rats were divided into six groups (n=10) according to diet composition and activity level, being: SD+CON, standard diet and control; SD+SED, standard diet and sedentary; SD+EX, standard diet and exercised; CD+CON, cafeteria diet and control; CD+SED, cafeteria diet and sedentary; CD+EX, cafeteria diet and exercised. The exercise protocol consisted of 10 ladder-climbing sessions/day, 5 days/week, and the sedentary rats were maintained in individual cages with limited mobility. Body mass and food intake were evaluated weekly. After 10 weeks, the animals were euthanized, and white adipose tissue was collected. The bone structure was evaluated by densitometry, mechanical tests, histomorphometric, and micro-computed tomography analyses. RESULTS: The cafeteria diet increased adipose tissue (p<0.001), decreased bone mineral density (p=0.004), and impaired biomechanical properties (p<0.05) and histomorphometry parameters (p=0.044). The sedentarism decreased bone mineral density (p<0.001) and biomechanical properties (p<0.05), and the exercise did not improve bone properties. CONCLUSION: In this experimental model, it was concluded that the cafeteria diet and a sedentary lifestyle negatively affect bone, and ladder-climbing exercise could not prevent the effects of the unhealthy diet.

An in vitro study using confocal laser scanning microscopy to evaluate the marginal misfits of different implant-supported frameworks.

PURPOSE: This study aimed to develop and evaluate a simple, non-destructive method for assessing the misfit and passivity of implant-retained prostheses frameworks. MATERIALS AND METHODS: To simulate the rehabilitation of a mandible posterior partially edentulous area using 3-unit screw-retained frameworks supported by two implants were fabricated and divided into the following five groups (n = 10 in each group): OP = one-piece framework cast in Co-Cr with the conventional method (control-group); Co-Cr frameworks sectioned and welded by laser (=LAS) or tungsten inert gas (=TIG); Co-Cr CAD-CAM = milled Co-Cr framework; Zir CAD-CAM = milled zirconia framework. The horizontal |X| and vertical |Y| misfits were measured using confocal laser scanning microscopy with one or both screws tightened. Data were analyzed by a two-way ANOVA with repeated measures and Bonferroni correction (α = 0.05). RESULTS: The greatest |X| misfit was observed in the OP group with both screws tightened (290 µm) and one screw tightened (388 and 340 µm). The conventional casting groups sectioned and welded by laser or TIG had lower mean values (235.35 µm, both screws tightened; and 275 µm, one screw tightened) than the OP framework. However, these values still exceeded those of the milled Co-Cr and zirconia frameworks (190 and 216 µm with both screws tightened). Across all reading conditions, every framework subjected to testing consistently maintained vertical |Y| misfit levels below the threshold of 53 µm; however, the milled frameworks exhibited higher vertical misfits than the frameworks obtained by the conventional cast method. CONCLUSIONS: The frameworks, whether cast and sectioned with laser welding or milled from Co-Cr, exhibit improved marginal misfit and enhanced passive fit when compared to other fabrication methods. Additionally, the use of confocal laser scanning microscopy is highly effective for passivity and misfit analysis.

Comparison of diuretics and fluid expansion in the initial treatment of patients with normotensive acute pulmonary embolism: a systematic review and meta-analysis.

BACKGROUND: Right ventricular (RV) dysfunction is the main cause of death in patients with normotensive acute pulmonary embolism (PE). The optimal management for this subset of patients remains uncertain. This systematic review and meta-analysis focused on the comparison of diuretics and fluid expansion in patients with acute PE presenting with RV dysfunction and haemodynamic stability. METHODS: A systematic review was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines considering only RTCs. The authors searched the traditional and grey literature through 1 November 2022. Meta-analysis used open source packages in R. Inverse variance fixed-effects models with OR as the effect measure were used for primary analyses. The main outcomes defined in this review protocol included pulmonary arterial systolic pressure (PASP), creatinine value changes and N-terminal pro-B-type natriuretic peptide during the first 24 hours. RESULTS: Four studies with a total of 452 patients met the inclusion criteria. The baseline characteristics of patients were similar across all studies. Overall, patients receiving diuretics had a significant 24 hours reduction in pro-B-type natriuretic peptide (standard mean difference of -41.97; 95% CI -65.79 to -18.15), and PASP (standard mean difference of -5.96; 95% CI -8.06 to -3.86). This group had significantly higher creatinine levels (standard mean difference of 7.74; 95% CI 5.04 to 10.45). The quality of the studies was heterogeneous; two had a low risk of bias, and the other two had a high risk of bias. CONCLUSIONS: Very few studies have compared the efficacy and safety of diuretics and fluid expansion in normotensive patients with acute PE with RV failure. Overall, furosemide appears to reduce RV dysfunction in this subset of patients compared with fluid expansion. Further research is required to confirm these findings.

Caffeine Does Not Alter Performance, Perceptual Responses, and Oxidative Stress After Short Sprint Interval Training.

Despite the abundance of research investigating the efficacy of caffeine supplementation on exercise performance, the physiological and biochemical responses to caffeine supplementation during intermittent activities are less evident. This study investigated the acute effects of caffeine supplementation on measures of exercise performance, ratings of perceived exertion, and biomarkers of oxidative stress induced by an acute bout of sprint interval training. In a randomized crossover design, 12 healthy males (age: 26 ± 4 years, height: 177.5 ± 6 cm, body mass: 80.7 ± 7.6 kg) ingested 6 mg/kg of caffeine or placebo 60 min prior to performing sprint interval training (12 × 6 s "all-out sprints" interspersed by 60 s of rest). Performance scores and ratings of perceived exertion were assessed after every sprint. Blood samples were collected before supplementation, prior to and following each sprint, and 5 and 60 min after the last sprint. Caffeine had no effect on any performance measures, ratings of perceived exertion, or biomarkers of oxidative stress (p > .05). In conclusion, caffeine supplementation does not improve performance or decrease oxidative stress after an acute bout of sprint interval training.

Psychometric properties analysis of helping relationships skills inventory for Portuguese nurses and doctors.

This paper answered some authors' requests to analyze the Helping Relationships Skills Inventory psychometric properties, a four dimensions measure. At this level, the study contributed to accessing the first reliable and valid instrument headed to Portuguese nurses and doctors. Methods: An online survey with Portuguese nurses and doctors (n = 262) was managed to assess the psychometrics properties analysis of the Helping Relationships Skills Inventory. Data were analyzed using descriptive statistics, confirmatory factor analysis, the average variance extracted (AVE), the heterotrait-monotrait ratio of correlations (HTMT), Cronbach's Alpha, and McDonald's Omega were computed. Results: The four-factor of the original Helping Relationships Skills Inventory was only supported by Exploratory Factor Analysis, with good internal consistency. Our study accepted this correlational structure hypothesis, which demonstrated acceptable to good sensitivity, convergent validity (AVE: 0.84-0.67), and reliability (Cronbach's Alpha: 0.92-0.88; McDonald'Omega: 0.93-0.79). Also stays verified discriminant validity for the majority of the factors with some reserves between Generics and Emphatics dimensions (HTMT: 0.90), revealing high commonality among them (r = 0.84; p < .001) Conclusions: The findings support the sensitivity, construct validity, and reliability of the Helping Relationships Skills Inventory among Portuguese nurses and doctors. However, will be useful to associate qualitative methodologies to explore the phenomenon better.

Ibuprofen-Immobilized Thin Films: A Novel Approach to Improve the Clearance of Protein-Bound Uremic Toxins.

Chronic kidney disease (CKD), a pressing global health issue, affects millions and leads to end-stage renal disease (ESRD). Hemodialysis (HD) is a crucial treatment for ESRD, yet its limited efficiency in removing protein-bound uremic toxins (PBUTs) results in high morbidity and mortality rates. A high affinity of pharmaceutical drugs for human serum albumin (HSA) can be leveraged to compete effectively with PBUTs for the same HSA binding sites, thereby enabling them to be capable of displacing these toxins. One such drug is ibuprofen (IBF), known for its very high affinity for HSA and sharing the same binding site as indoxyl sulfate (IS). This study explores the development of IBF-immobilized cellulose acetate-based (CA-based) thin films. The films were created by reacting CA with IBF-modified silica precursors at varying concentrations. The presence of IBF in CA/TEOS/APTES-IBF-3 and CA/TEOS-IBF-25 films, containing 3 and 25 wt % IBF, respectively, was confirmed through 1H NMR spectra. Competitive displacement binding assays indicated that while the incorporation of 3 wt % IBF showed no significant enhancement in IS displacement, the 25 wt % IBF film increased the dialyzed IS by 1.3 when normalized to non-IBF films. Furthermore, there was a 1.2-fold decrease in the total percentage of IS, and the free percentage of IS increased 1.3 to 3.0 times. Although direct systemic infusion of IBF in HD patients achieves a 2.4 times higher removal of IS, it is impractical due to the risks it poses to ESRD patients. The IBF-immobilized films offer the advantage of localized binding, thus eliminating the need for systemic exposure. This innovative approach lays a foundation for developing more efficient HD membranes, aiming to address the challenging issue of PBUT elimination and potentially enhance the quality of life and treatment outcomes for ESRD patients.

Effectiveness of undergraduate medical students training on LGBTQIA + people health: a systematic review and meta-analysis.

BACKGROUND: Adequacy of learning models and their ability to engage students and match session's objectives are critical factors in achieving the desired outcome. In this systematic review and meta-analysis, we assess the methodological approach, content, and effectiveness of training initiatives addressing medical students' knowledge, attitudes, confidence and discrimination perception towards LGBTQIA + people. METHOD: PubMed, Web of Science, Medline and Scopus were searched to identify published studies, from 2013 to 2023, on effectiveness of training initiatives addressing medical students' knowledge, attitudes, confidence and discrimination perception towards LGBTQIA + people. The risk of bias of the selected studies was assessed by the Medical Education Research Study Quality Instrument. Overall effect sizes were calculated using a Mantel-Haenszel method, fixed effect meta-analyses. RESULTS: A total of 22 studies were included, representing 2,164 medical students. The interventions were highly diverse and included seminars, lectures, videos, real-case discussions, roleplay, and group discussions with people from the LGBTQIA + community. After the interventions, there was a significant improvement in self-confidence and comfort interacting with patients and in the understanding of the unique and specific health concerns experienced by LGBTQIA + patients. CONCLUSION: Our findings indicated that the outcomes of interventions training actions for medical students that promote knowledge and equity regarding LGBTQIA + people, regardless of their scope, methodology and duration, result in a considerable increase in students' self-confidence and comfort interacting with LGBTQIA + patients, highlight the need for more actions and programs in this area promoting a more inclusive society and greater equity.

Rho-Kinase Is Differentially Expressed in the Adipose Tissue of Rodent and Human in Response to Aging, Sex, and Acute Exercise.

White adipose tissue (WAT) controls energy storage, expenditure, and endocrine function. Rho-kinase (ROCK) is related to impaired thermogenesis, downregulation of preadipocyte differentiation, and adipokine production. Furthermore, WAT ROCK responds to metabolic stress from high-fat diets or diabetes. However, ROCK distribution in adipose depots and its response to aging and sex remain unclear. Thus, we aim to investigate ROCK function in adipose tissue of rodent and human in response to aging and sex. We observed specific differences in the ROCK1/2 distribution in inguinal WAT (ingWAT), perigonadal WAT (pgWAT), and brown adipose tissue of male and female rodents. However, ROCK2 expression was lower in female ingWAT compared with males, a fact that was not observed in the other depots. In the pgWAT and ingWAT of male and female rodents, ROCK activity increased during development. Moreover, middle-aged female rodents and humans showed downregulation in ROCK activity after acute physical exercise. Interestingly, ROCK levels were associated with several inflammatory markers both in rats and humans WAT (Nfkb1, Tnf, Il1b, Il6, and Mcp1). Induction of cell senescence by etoposide elevates ROCK activity in human preadipocytes; however, silencing ROCK1/2 demonstrates improvement in the inflammatory and cell senescence state. Using public databases, several pathways were strongly associated with ROCK modulation in WAT. In summary, WAT ROCK increases with development in association with inflammatory markers. Further, ROCK activity was attenuated by acute physical exercise, implicating it as a possible therapeutic target for metabolism improvement mediated by adipose tissue inflammatory state changes.

Effectiveness of experimental dentifrices based on essential oils on biofilm on complete dentures: an in vitro study

Abstract Specific products containing natural resources can contribute to the innovation of complete denture hygiene. Objective: To conduct an in vitro evaluation of experimental dentifrices containing essential oils of Bowdichia virgilioides Kunth (BvK), Copaifera officinalis (Co), Eucalyptus citriodora (Ec), Melaleuca alternifolia (Ma) and Pinus strobus (Ps) at 1%. Methodology: The variables evaluated were organoleptic and physicochemical characteristics, abrasiveness (mechanical brushing machine) simulating 2.5 years, and microbial load (Colony Forming Units - CFU/mL), metabolic activity (XTT assay) and cell viability (Live/Dead® BacLight™ kit) of the multispecies biofilm (Streptococcus mutans: Sm, Staphylococcus aureus: Sa, Candida albicans: Ca and Candida glabrata: Cg). Specimens of heat-polymerized acrylic resins (n=256) (n=96 specimens for abrasiveness, n=72 for microbial load count, n=72 for biofilm metabolic activity, n=16 for cell viability and total biofilm quantification) with formed biofilm were divided into eight groups for manual brushing (20 seconds) with a dental brush and distilled water (NC: negative control), Trihydral (PC: positive control), placebo (Pl), BvK, Co, Ec, Ma or Ps. After brushing, the specimens were washed with PBS and immersed in Letheen Broth medium, and the suspension was sown in solid specific medium. The organoleptic characteristics were presented by descriptive analysis. The values of density, pH, consistency and viscosity were presented in a table. The data were analyzed with the Wald test in a generalized linear model, followed by the Kruskal-Wallis test, Dunn's test (mass change) and the Bonferroni test (UFC and XTT). The Wald test in Generalized Estimating Equations and the Bonferroni test were used to analyze cell viability. Results: All dentifrices showed stable organoleptic characteristics and adequate physicochemical properties. CN, Ec, Ps, Pl and PC showed low abrasiveness. There was a significant difference between the groups (p<0.001) for microbial load, metabolic activity and biofilm viability. Conclusions: It was concluded that the BvK, Ec and Ps dentifrices are useful for cleaning complete dentures, as they have antimicrobial activity against biofilm. The dentifrices containing Bowdichia virgilioides Kunth showed medium abrasiveness and should be used with caution.

Evaluation of surface roughness, wettability and adhesion of multispecies biofilm on 3D-printed resins for the base and teeth of complete dentures

Abstract Studies evaluating the roughness, wettability and microbial adhesion of 3D-printed resins for complete denture bases and teeth are scarce. Objective This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). Methodology Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). Results The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. Conclusion The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

ANCA-associated vasculitis: overview and practical issues of diagnosis and therapy from a European perspective.

Antineutrophil cytoplasmic antibodies (ANCA)-associated vasculitis (AAV) is a heterogeneous group of rare diseases characterized by necrotizing inflammation predominantly of small vessels and the presence of these circulating antibodies. AAV comprises three important diseases, namely granulomatosis with polyangiitis, microscopic polyangiitis, and eosinophilic granulomatosis with polyangiitis, which affect multiple organ systems, significantly affecting patients' quality of life and survival. The diagnosis is established according to the clinical manifestations, detectable ANCA, and histopathology findings. Primary treatment strategies are adapted to the severity of the disease and based on immunosuppression with corticosteroids and cyclophosphamide, with increasing adoption of new, less toxic agents aimed at sustained remission of the disease, such as rituximab, methotrexate, and mycophenolate mofetil. Several international medical organizations have proposed recommendations for diagnosing and managing these diseases to standardize the procedures. In this study, we provide an up-to-date European perspective on AAV management, compiling current and relevant information regarding its epidemiology, symptoms, diagnosis, treatment strategies, and prognosis.