A comparative study of the physical and chemical properties of pelletized HKUST-1, ZIF-8, ZIF-67 and UiO-66 powders.

The physical and chemical properties of four metal organic frameworks were examined before and after the pelletization process with pressure (tablet) and binders (pellet) for their possible use in industrial or other commercial processes. Due to the uniqueness of their crystal structure, each MOF behaved differently under the same treatment. ZIF-8 proved to be very robust in the presence of binding materials (pellet) as well as after the application of pressure (tablet). The presence of water resulted in the reversible partial loss of their crystalline morphology in the case of HKUST-1 and UiO-66 (pellet). The crystal structure of ZIF-67 was irreversibly lost in the case of the pellet but it was well maintained under pressure (tablet).

Closing the carbon cycle through rational use of carbon-based fuels.

In this paper, a brief overview is presented of natural gas as a fuel resource with subsequent carbon capture and re-use as a means to facilitate reduction and eventual elimination of man-made carbon emissions. A particular focus is shale gas and, to a lesser extent, methane hydrates, with the former believed to provide the most reasonable alternative as a transitional fuel toward a low-carbon future. An emphasis is placed on the gradual elimination of fossil resource usage as a fuel over the coming 35 to 85 years and its eventual replacement with renewable resources and nuclear power. Furthermore, it is proposed that synthesis of chemical feedstocks from recycled carbon dioxide and hydrogen-rich materials should be undertaken for specific applications in the transport sector which require access to high energy density fuels. To achieve the latter, carbon dioxide capture is imperative and possible synthetic routes for chemical feedstock production are briefly reviewed.

Diffusion within ultrathin, dense nanoporous silica films.

In this work the origin of permselectivity in dense silica films which possess a pore structure with pore sizes commensurate with the molecular size of the diffusing gas species is investigated. Much of the recently reported work in this field has involved the development of composite membrane films, and while it is generally assumed that the transport process of the gas species within the selective layer of these films is activated in nature, there are anomalies with this simplified picture. In this paper a new model is developed which, for the first time, explains the permselective behavior of the thin selective coatings ubiquitous to membrane separation processes. The model involves the existence of two primary transport domains within the solid film, one of which rapidly conducts the permeating gas (under non-Fickian conditions), while the second domain involves a slow diffusion mode characterized by normal Fickian transport. To validate the model, molecular dynamics simulations are conducted for diffusion of a number of simple gases (He, N(2), and CO(2)) within silica glasses over a range of solid densities. The silica media employed in these studies are based on a novel approach developed in this work for the construction of three-dimensionally periodic atomistic structures of silica of arbitrary density in which network bond connectivity is ensured. The results obtained from this work are in qualitative agreement with experimental observations and confirm the existence of dual mode transport which is central to the interpretation of the permselectivity in composite membranes systems.

Atomistic simulation of the formation of nanoporous silica films via molecular chemical vapor deposition on nonporous substrates.

To distinguish thin deposited film characteristics clearly from the influence of substrate morphological properties, the growth mechanism and the macroscale and nanoscale properties of nanoporous SiO(2) films deposited on nonporous silica (SiO(2)) substrates from chemical precursors Si(OH)(4) and TEOS (tetraethoxysilane) via low-pressure chemical vapor deposition are the primary targets of this study. This work employs a kinetic Monte Carlo (KMC) simulation method coupled to the Metropolis Monte Carlo method to relax the strained silica structure. The influence of the deposition temperature (473, 673, and 873 K) on the properties of the SiO(x) layers is addressed via analysis of the film growth rates, density profiles of the deposited thin films, pore size distributions, carbon depth profiles (with respect to TEOS), and voidage analysis for layers of different thicknesses (8-18 nm). A comparison of simulation with experimental results is also carried out.

Novel, nanoporous silica and titania layers fabricated by magnetron sputtering.

Composite asymmetric membranes are fabricated through the deposition of submicrometer thick (100 nm) silica (SiO(2)) and titania (TiO(2)) films onto flat nanoporous silica and zirconia substrates by magnetron sputtering. The deposition conditions for both coating types were systematically altered to determine their influence on the deposited coating morphology and thickness. Ideal He/N(2) gas selectivity was measured for all of the membranes. The TiO(2) coatings, when deposited onto a ZrO(2) support layer with a pore size of 3 nm, formed a long columnar grain structure with average column diameter of 38 nm. A similar columnar structure was observed for TiO(2) coatings deposited onto a SiO(2) support layer with a pore size of 1 nm. Under the same conditions, SiO(2) coatings, deposited onto the same SiO(2) supports, formed a closely packed spherical grain structure whereas, when deposited onto ZrO(2) supports, the SiO(2) coatings formed an open grain structure. The average SiO(2) grain diameter was 36 nm in both cases. This preliminary investigation was aimed at studying the effect of sputtering parameters on the density and morphology of the deposited coatings. For the depositions carried out, the coating material was found to be very dense. However, the presence of grain boundaries resulted in poor ideal He/N(2) separation efficiencies.

Deposition of hybrid organic-inorganic composite coatings using an atmospheric plasma jet system.

The objective of this study is to investigate the influence of alcohol addition on the incorporation of metal oxide nanoparticles into nm thick siloxane coatings. Titanium oxide (TiO2) nanoparticles with diameters of 30-80 nm were incorporated into an atmospheric plasma deposited tetramethylorthosilicate (TMOS) siloxane coating. The TMOS/TiO2 coating was deposited using the atmospheric plasma jet system known as PlasmaStream. In this system the liquid precursor/nanoparticle mixture is nebulised into the plasma. It was observed that prior to being nebulised the TiO2 particles agglomerated and settled over time in the TMOS/TiO2 mixture. In order to obtain a more stable nanoparticle/TMOS suspension the addition of the alcohols methanol, octanol and pentanol to this mixture was investigated. The addition of each of these alcohols was found to stabilise the nanoparticle suspension. The effect of the alcohol was therefore assessed with respect to the properties of the deposited coatings. It was observed that coatings deposited from TMOS/TiO2, with and without the addition of methanol were broadly similar. In contrast the coatings deposited with octanol and pentanol addition to the TMOS/TiO2 mixture were significantly thicker, for a given set of deposition parameters and were also more homogeneous. This would indicate that the alcohol precursor was incorporated into the plasma polymerised siloxane. The incorporation of the organic functionality from the alcohols was confirmed from FTIR spectra of the coatings. The difference in behaviour with alcohol type is likely to be due to the lower boiling point of methanol (65 degrees C), which is lower than the maximum plasma temperature measured at the jet orifice (77 degrees C). This temperature is significantly lower than the 196 degrees C and 136 degrees C boiling points of octanol and pentanol respectively. The friction of the coatings was determined using the Pin-on-disc technique. The more organic coatings deposited with octanol and pentanol exhibited friction values of 0.2, compared with approx. 0.8 for the coatings deposited from TMOS/TiO2 mixture (with and without methanol). Wear performance comparison between the two types of coating again indicated a significant organic component in the coatings deposited from the higher boiling point alcohols.

Differential water sorption studies on Kevlar 49 and As-polymerized poly(p-phenylene terephthalamide): determination of water transport properties.

Water vapor sorption experiments have been conducted on Kevlar 49 at 30 degrees C over a range of water vapor pressures in 0-90% of saturation and on the as-polymerized form of the material at 30, 45, and 60 degrees C over a series of water vapor pressures of 0-60%, 0-25%, and 0-15%, respectively. For each of the differential steps in water vapor pressure, dynamic uptake curves were generated and analyzed according to a number of different mathematical models, including Fickian, Coaxial cylindrical, and intercalation models. The intercalation model was demonstrated to be the most successful model and considered two time-scales involved in the diffusion process, i.e., a penetrant-diffusive time-scale and a polymer-local-matrix-relaxation time-scale. The success of this model reinforces previously reported adsorption and desorption isotherms which suggested that water may penetrate into the surface layers of the polymer crystallite through a process known as intercalation.