Unexpected Energy Applications of Ionic Liquids.

Ionic liquids and their various analogues are without doubt the scientific sensation of the last few decades, paving the way to a more sustainable society. Their versatile suite of properties, originating from an almost inconceivably large number of possible cation and anion combinations, allows tuning of the structure to serve a desired purpose. Ionic liquids hence offer a myriad of useful applications from solvents to catalysts, through to lubricants, gas absorbers, and azeotrope breakers. The purpose of this review is to explore the more unexpected of these applications, particularly in the energy space. It guides the reader through the application of ionic liquids and their analogues as i) phase change materials for thermal energy storage, ii) organic ionic plastic crystals, which have been studied as battery electrolytes and in gas separation, iii) key components in the nitrogen reduction reaction for sustainable ammonia generation, iv) as electrolytes in aluminum-ion batteries, and v) in other emerging technologies. It is concluded that there is tremendous scope for further optimizing and tuning of the ionic liquid in its task, subject to sustainability imperatives in line with current global priorities, assisted by artificial intelligence.

Advanced Electrolyte Formula for Robust Operation of Vanadium Redox Flow Batteries at Elevated Temperatures.

Insufficient thermal stability of vanadium redox flow battery (VRFB) electrolytes at elevated temperatures (>40 °C) remains a challenge in the development and commercialization of this technology, which otherwise presents a broad range of technological advantages for the long-term storage of intermittent renewable energy. Herein, a new concept of combined additives is presented, which significantly increases thermal stability of the battery, enabling safe operation to the highest temperature (50 °C) tested to date. This is achieved by combining two chemically distinct additives-inorganic ammonium phosphate and polyvinylpyrrolidone (PVP) surfactant, which collectively decelerate both protonation and agglomeration of the oxo-vanadium species in solution and thereby significantly suppress detrimental formation of precipitates. Specifically, the precipitation rate is reduced by nearly 75% under static conditions at 50° C. This improvement is reflected in the robust operation of a complete VRFB device for over 300 h of continuous operation at 50 °C, achieving an impressive 83% voltage efficiency at 100 mA cm-2 current density, with no precipitation detected in either the electrode/flow-frame or electrolyte tank.

Preface to Special Issue on Sustainable Ammonia Synthesis.

In this Editorial, Guest Editors Douglas R. MacFarlane, Egill Skúlason, Hideo Hosono and Minhua Shao discuss the newly emerging field of electrochemical nitrogen reduction reaction (NRR) in the Special Issue of ChemSusChem on Sustainable Ammonia Synthesis.

Fluoroborate ionic liquids as sodium battery electrolytes.

High-voltage sodium batteries are an appealing solution for economical energy storage applications. Currently available electrolyte materials have seen limited success in such applications therefore the identification of high-performing and safer alternatives is urgently required. Herein we synthesise six novel ionic liquids derived from two fluoroborate anions which have shown great promise in recent battery literature. This study reports for the first time the electrochemically applicable room-temperature ionic liquid (RTIL) N-ethyl-N,N,N-tris(2-(2-methoxyethoxy)ethyl)ammonium (tetrakis)hexafluoroisopropoxy borate ([N2(2O2O1)3][B(hfip)4]). The RTIL shows promising physical properties with a very low glass-transition at -73 °C and low viscosity. The RTIL exhibits an electrochemical window of 5.3 V on a glassy carbon substrate which enables high stability electrochemical cycling of sodium in a 3-electrode system. Of particular note is the strong passivation behaviour of [N2(2O2O1)3][B(hfip)4] on aluminium current-collector foil at potentials as high as 7 V (vs. Na+/Na) which is further improved with the addition of 50 mol% Na[FSI]. This study shows [B(hfip)4]- ionic liquids have the desired physical and electrochemical properties for high-voltage sodium electrolytes.

Probing the molecular interactions between cholinium-based ionic liquids and insulin aspart: A combined computational and experimental study.

Despite extensive studies revealing the potential of cholinium-based ionic liquids (ILs) in protein stabilization, the nature of interaction between ILs' constituents and protein residues is not well understood. In this work, we used a combined computational and experimental approach to investigate the structural stability of a peptide hormone, insulin aspart (IA), in ILs containing a choline cation [Ch]+ and either dihydrogen phosphate ([Dhp]-) or acetate ([Ace]-) as anions. Although IA remained stable in both 1 M [Ch][Dhp] and 1 M [Ch][Ace], [Dhp]- exhibited a much stronger stabilization effect than [Ace]-. Both the hydrophilic ILs intensely hydrated IA and increased the number of water molecules in IA's solvation shell. Undeterred by the increased number of water molecules, the native state of IA's hydrophobic core was maintained in the presence of ILs. Importantly, our results reveal the importance of IL concentration in the medium which was critical to maintain a steady population of ions in the microenvironment of IA and to counteract the denaturing effect of water molecules. Through molecular docking, we confirm that the anions exert the dominant effect on the structure of IA, while [Ch]+ have the secondary influence. The computational results were validated using spectroscopic analyses (ultra-violet, fluorescence, and circular dichroism) along with dynamic light scattering measurements. The extended stability of IA at 30 °C for 28 days in 1 M [Ch][Dhp] and [Ch][Ace] demonstrated in this study reveals the possibility of stabilizing IA using cholinium-based ILs.

Concluding remarks: Sustainable nitrogen activation - are we there yet?

The activation of dinitrogen as a fundamental step in reactions to produce nitrogen compounds, including ammonia and nitrates, has a cornerstone role in chemistry. Bringing together research from disparate fields where this can be achieved sustainably, this Faraday Discussion seeks to build connections between approaches that can stimulate further advances. In this paper we set out to provide an overview of these different approaches and their commonalities. We explore experimental aspects including the positive role of increasing nitrogen pressure in some fields, as well as offering perspectives on when 15N2 experiments might, and might not, be necessary. Deconstructing the nitrogen reduction reaction, we attempt to provide a common framework of energetic scales within which all of the different approaches and their components can be understood. On sustainability, we argue that although green ammonia produced from a green-H2-fed Haber-Bosch process seems to fit the bill, there remain many real-world contexts in which other, sustainable, approaches to this vital reaction are urgently needed.

Biorenewable Calcite as an Inorganic Filler in Ionic Liquid Gel Polymer Electrolytes for Supercapacitors.

Supercapacitors play a crucial role in the global shift toward cleaner, renewable energy and away from fossil fuels. Ionic liquid electrolytes have a larger electrochemical window than some organic electrolytes and have been mixed with various polymers to make ionic liquid gel polymer electrolytes (ILGPEs), a solid-state electrolyte and separator combination. One way to improve the conductivity of these electrolytes is to add inorganic materials such as ceramics and zeolites to increase their ionic conductivity. Herein, we incorporate a biorenewable calcite from waste blue mussel shells as an inorganic filler in ILGPEs. ILGPEs composed of 80 wt % [EMIM][NTf2] and 20 wt % PVdF-co-HFP are prepared with various amounts of calcite to determine the effect on the ionic conductivity. The optimal addition of calcite is 2 wt % based on the mechanical stability of the ILGPE. The ILGPE with calcite has the same thermostability (350 °C) and electrochemical window (3.5 V) as the control ILGPE. Symmetric coin cell capacitors were fabricated using ILGPEs with 2 wt % calcite and without calcite as a control. Their performance was compared using cyclic voltammetry and galvanostatic cycling. The specific capacitances of the two devices are similar, 110 and 129 F g-1, with and without calcite, respectively.

Phase Change Materials for Renewable Energy Storage at Intermediate Temperatures.

Thermal energy storage technologies utilizing phase change materials (PCMs) that melt in the intermediate temperature range, between 100 and 220 °C, have the potential to mitigate the intermittency issues of wind and solar energy. This technology can take thermal or electrical energy from renewable sources and store it in the form of heat. This is of particular utility when the end use of the energy is also as heat. For this purpose, the material should have a phase change between 100 and 220 °C with a high latent heat of fusion. Although a range of PCMs are known for this temperature range, many of these materials are not practically viable for stability and safety reasons, a perspective not often clear in the primary literature. This review examines the recent development of thermal energy storage materials for application with renewables, the different material classes, their physicochemical properties, and the chemical structural origins of their advantageous thermal properties. Perspectives on further research directions needed to reach the goal of large scale, highly efficient, inexpensive, and reliable intermediate temperature thermal energy storage technologies are also presented.

Nanoscale TiO2 Coatings Improve the Stability of an Earth-Abundant Cobalt Oxide Catalyst during Acidic Water Oxidation.

The large-scale deployment of proton-exchange membrane water electrolyzers for high-throughput sustainable hydrogen production requires transition from precious noble metal anode electrocatalysts to low-cost earth-abundant materials. However, such materials are commonly insufficiently stable and/or catalytically inactive at low pH, and positive potentials required to maintain high rates of the anodic oxygen evolution reaction (OER). To address this, we explore the effects of a dielectric nanoscale-thin layer, constituted of amorphous TiO2, on the stability and electrocatalytic activity of nanostructured OER anodes based on low-cost Co3O4. We demonstrate a direct correlation between the OER performance and the thickness of the atomic layer deposited TiO2 layers. An optimal TiO2 layer thickness of 4.4 nm enhances the anode lifetime by a factor of ca. 3, achieving 80 h of continuous electrolysis at pH near zero, while preserving high OER catalytic activity of the bare Co3O4 surface. Thinner and thicker TiO2 layers decrease the stability and activity, respectively. This is attributed to the pitting of the TiO2 layer at the optimal thickness, which allows for access to the catalytically active Co3O4 surface while stabilizing it against corrosion. These insights provide directions for the engineering of active and stable composite earth-abundant materials for acidic water splitting for high-throughput hydrogen production.

A Survey of Catalytic Materials for Ammonia Electrooxidation to Nitrite and Nitrate.

Studies of the ammonia oxidation reaction (AOR) for the synthesis of nitrite and nitrate (NO2/3 - ) have been limited to a small number of catalytic materials, majorly Pt based. As the demand for nitrate-based products such as fertilisers continues to grow, exploration of alternative catalysts is needed. Herein, 19 metals immobilised as particles on carbon fibre electrodes were tested for their catalytic activity for the ammonia electrooxidation to NO2/3 - under alkaline conditions (0.1 m KOH). Nickel-based electrodes showed the highest overall NO2/3 - yield with a rate of 5.0±1.0 nmol s-1 cm-2 , to which nitrate contributed 62±8 %. Cu was the only catalyst that enabled formation of nitrate, at a rate of 1.0±0.4 nmol s-1 cm-2 , with undetectable amounts of nitrite produced. Previously unexplored in this context, Fe and Ag also showed promise and provided new insights into the mechanisms of the process. Ag-based electrodes showed strong indications of activity towards NH3 oxidation in electrochemical measurements but produced relatively low NO2/3 - yields, suggesting the formation of alternate oxidation products. NO2/3 - production over Fe-based electrodes required the presence of dissolved O2 and was more efficient than with Ni on longer timescales. These results highlight the complexity of the AOR mechanism and provide a broad set of catalytic activity and nitrate versus nitrite yield data, which might guide future development of a practical process for the distributed sustainable production of nitrates and nitrites at low and medium scales.

Electroreduction of nitrogen with almost 100% current-to-ammonia efficiency.

In addition to its use in the fertilizer and chemical industries1, ammonia is currently seen as a potential replacement for carbon-based fuels and as a carrier for worldwide transportation of renewable energy2. Implementation of this vision requires transformation of the existing fossil-fuel-based technology for NH3 production3 to a simpler, scale-flexible technology, such as the electrochemical lithium-mediated nitrogen-reduction reaction3,4. This provides a genuine pathway from N2 to ammonia, but it is currently hampered by limited yield rates and low efficiencies4-12. Here we investigate the role of the electrolyte in this reaction and present a high-efficiency, robust process that is enabled by compact ionic layering in the electrode-electrolyte interface region. The interface is generated by a high-concentration imide-based lithium-salt electrolyte, providing stabilized ammonia yield rates of 150 ± 20 nmol s-1 cm-2 and a current-to-ammonia efficiency that is close to 100%. The ionic assembly formed at the electrode surface suppresses the electrolyte decomposition and supports stable N2 reduction. Our study highlights the interrelation between the performance of the lithium-mediated nitrogen-reduction reaction and the physicochemical properties of the electrode-electrolyte interface. We anticipate that these findings will guide the development of a robust, high-performance process for sustainable ammonia production.

High-Performance Magnesium Electrochemical Cycling with Hybrid Mg-Li Electrolytes.

Kinetics and coulombic efficiency of the electrochemical magnesium plating and stripping processes are to a significant extent defined by the composition of the electrolyte solution, optimization of which presents a pathway for improved performance. Adopting this strategy, we undertook a systematic investigation of the Mg0/2+ process in different combinations of the Mg2+-Li+-borohydride-bis(trifluoromethylsulfonyl)imide (TFSI-) electrolytes in 1,2-dimethoxyethane (DME) solvent. Results indicate that the presence of BH4- is essential for high coulombic efficiency, which coordination to Mg2+ was confirmed by Raman and NMR spectroscopic analysis. However, the high rates observed also require the presence of Li+ and a supplementary anion such as TFSI-. The Li+ + BH4- + TFSI- combination of ionic species prevents passivation of the magnesium surface and thereby enables efficient Mg0/2+ electrochemical cycling. The best Mg0/2+ performance with the stabilized coulombic efficiency of 88 ± 1% and one of the highest deposition/stripping rates at ambient temperature reported to date are demonstrated at an optimal [Mg(BH4)2]:[LiTFSI] mole ratio of 1:2.

Metallic Inverse Opal Frameworks as Catalyst Supports for High-Performance Water Electrooxidation.

High intrinsic activity of oxygen evolution reaction (OER) catalysts is often limited by their low electrical conductivity. To address this, we introduce copper inverse opal (IO) frameworks offering a well-developed network of interconnected pores as highly conductive high-surface-area supports for thin catalytic coatings, for example, the extremely active but poorly conducting nickel-iron layered double hydroxides (NiFe LDH). Such composites exhibit significantly higher OER activity in 1 m KOH than NiFe LDH supported on a flat substrate or deposited as inverse opals. The NiFe LDH/Cu IO catalyst enables oxygen evolution rates of 100 mA cm-2 (727±4 A gcatalyst -1 ) at an overpotential of 0.305±0.003 V with a Tafel slope of 0.044±0.002 V dec-1 . This high performance is achieved with 2.2±0.4 µm catalyst layers, suggesting compatibility of the inverse-opal-supported catalysts with membrane electrolyzers, in contrast to similarly performing 103 -fold thicker electrodes based on foams and other substrates.

Doping Engineering of Single-Walled Carbon Nanotubes by Nitrogen Compounds Using Basicity and Alignment.

Charge transport properties in single-walled carbon nanotubes (SWCNTs) can be significantly modified through doping, tuning their electrical and thermoelectric properties. In our study, we used more than 40 nitrogen-bearing compounds as dopants and determined their impact on the material's electrical conductivity. The application of nitrogen compounds of diverse structures and electronic configurations enabled us to determine how the dopant nature affects the SWCNTs. The results reveal that the impact of these dopants can often be anticipated by considering their Hammett's constants and pKa values. Furthermore, the empirical observations supported by first-principles calculations indicate that the doping level can be tuned not only by changing the type and the concentration of dopants but also by varying the orientation of nitrogen compounds around SWCNTs.

Enhanced structural stability of insulin aspart in cholinium aminoate ionic liquids.

Cholinium aminoates [Ch][AA] have gained tremendous interest as a promising ionic liquid medium for the synthesis and storage of proteins. However, high alkalinity of [Ch][AA] limits its usage with pH-sensitive proteins. Here, we probed the structure, stability, and interactions of a highly unstable therapeutic protein, insulin aspart (IA), in a range of buffered [Ch][AA] (b-[Ch][AA]) using a combination of biophysical tools and in silico pipeline including ultraviolet-visible, fluorescence, and circular dichroism spectroscopies, dynamic light scattering measurements and molecular docking. b-[Ch][AA] used in the study differed in concentrations and their anionic counterparts. We reveal information on ion and residue specific solvent-protein interactions, demonstrating that the structural stability of IA was enhanced by a buffered cholinium prolinate. In comparison to the glycinate and alaninate anions, the hydrophilic prolinate anions established more hydrogen bonds with the residues of IA and provided a less polar environment that favours the preservation of IA in its active monomeric form, opening new opportunities for utilizing [Ch][AA] as storage medium.

Study of Proton Transport in Diethylmethylammonium Poly[4-styrenesulfonyl(trifluoromethylsulfonyl)imide]-Based Composite Membranes with Triflic Acid and Diethylmethylamine-Rich Compositions.

The study highlights the effect of acid- and base-rich conditions on the proton dynamics of diethylmethylammonium poly[4-styrenesulfonyl(trifluoromethylsulfonyl)imide, [DEMA][PSTFSI], a polymerized protic ionic liquid designed as a polymer electrolyte for nonhumidified polymer electrolyte membrane fuel cells. Different proportions of triflic acid (HTf) and diethylmethylamine (DEMA) were added to the pristine polymer. The thermal analysis of the mixtures revealed that the addition of the base increases the glassy/amorphous nature of the polymer; however, HTf plasticizes the polymer and lowers the Tg value, so that it falls outside of the differential scanning calorimetry-studied temperature range. 50 mol % doping of the HTf contents increases the conductivity upto 0.952 mS cm-1, and 50 mol % DEMA mixture has a conductivity of 0.169 mS cm-1 at 100 °C. Vogel-Tamman-Fulcher fitting of the ionic conductivities of the doped systems suggested that the ionic conductivities are completely decoupled from segmental motion of the polymer. A combination of Fourier transform infrared and static NMR studies demonstrated that HTf-added polymer composites show conduction via Grotthuss and vehicular mechanisms, while DEMA-added polymer composites show predominantly a Grotthuss mechanism by developing the aggregates of proton and added base.

A solution scan of societal options to reduce transmission and spread of respiratory viruses: SARS-CoV-2 as a case study.

Societal biosecurity - measures built into everyday society to minimize risks from pests and diseases - is an important aspect of managing epidemics and pandemics. We aimed to identify societal options for reducing the transmission and spread of respiratory viruses. We used SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) as a case study to meet the immediate need to manage the COVID-19 pandemic and eventually transition to more normal societal conditions, and to catalog options for managing similar pandemics in the future. We used a 'solution scanning' approach. We read the literature; consulted psychology, public health, medical, and solution scanning experts; crowd-sourced options using social media; and collated comments on a preprint. Here, we present a list of 519 possible measures to reduce SARS-CoV-2 transmission and spread. We provide a long list of options for policymakers and businesses to consider when designing biosecurity plans to combat SARS-CoV-2 and similar pathogens in the future. We also developed an online application to help with this process. We encourage testing of actions, documentation of outcomes, revisions to the current list, and the addition of further options.