Hybrid films composed of ethyl(hydroxyethyl)cellulose and silica xerogel functionalized with a fluorogenic chemosensor for the detection of mercury in water.

Ethyl(hydroxyethyl)cellulose (EHEC) and a silica-based xerogel (SBX) were functionalized with a (18-crown-6)-styrylpyridine precursor (1) to obtain the modified polymers EHEC-1 and SBX-1, respectively. Films were obtained and the resulting materials were used as fluorogenic devices for the detection of Hg2+ in water. The films produced from EHEC-1 showed high water retention, making it difficult to apply as a reusable optical chemosensor. Since SBXs are recognized in the literature for their hydrophobicity, a hybrid film composed of EHEC and SBX-1 which did not show water retention was produced and characterized. This system showed rapid response time, outstanding selectivity compared to several other studied metal ions, and sensitivity for the detection of Hg2+ in water. The detection limit for this material using fluorescence technique was 2 ppb (∼10-8 mol L-1). The reversibility of the complex formed between EHEC-SBX-1 film and Hg2+ was demonstrated by the addition of cysteine to the medium. The result obtained also allowed the assembly of INHIBIT and IMPLICATION molecular logic gates, using Hg2+ and cysteine as inputs. The results described in this article have important significance in the development of novel reversible fluorogenic chemosensors and adsorbent materials for the effective removal of Hg2+ ions.

Use of Nonideality Parameters for the Analysis of the Thermodynamic Properties of Binary Mixtures.

Two parameters are introduced, a nonideality index (NII) and a nonideality area (NIA), for the analysis of the variations of thermodynamic properties of binary mixtures. Their calculation is based, for the NII, on experimental plots of the variation of a given property (density, refractive index, viscosity, etc.), and for the NIA, on experimental plots of its excess value (excess enthalpies, molar volumes, viscosities, refractive indices, isentropic compressibilities, etc.) with the mixture composition. Both nonideality parameters are therefore not based on any theoretical model or on its derived parameters, being applicable with any fitting equation. The NII or NIA values for a thermodynamic property of a series of related binary mixtures reveal interesting trends, which are not evident in most analyses of such systems. Besides their predictive value, these trends provide information on the relevance of solvent characteristics of the binary mixture, thus supporting new insights or interpretations of the experimental data.

Optical devices for the detection of cyanide in water based on ethyl(hydroxyethyl)cellulose functionalized with perichromic dyes.

Films of three polymers, based on ethyl(hydroxyethyl)cellulose functionalized with protonated perichromic dyes, were used for anion sensing. The polymer functionalized with protonated Brooker's merocyanine acts as a chromogenic/fluorogenic system for the selective detection of cyanide in water. An increase of >28 times was verified for the fluorescence lifetime of the sensing units in the polymer in comparison with protonated Brooker's merocyanine in water. Moreover, an increase in the pKa values was verified for the sensing units in the polymers. Data suggest that the hydrocarbonic polymeric chains provide an adequate microenvironment to protect the sensing unit from bulk water. The other polymer, functionalized with an iminophenol, also showed high selectivity for cyanide (detection limit=9.36×10-6molL-1 and quantification limit=3.12×10-5molL-1). The polymer functionalized with azophenol units is unable for the detection of cyanide, due to the low pKa value verified for its chromogenic units.

Thermohalochromism of phenolate dyes conjugated with nitro-substituted aryl groups.

The cationic halochromism and thermohalochromism of four phenolate dyes conjugated with aryl moieties substituted with one or two nitro groups were investigated in the presence of organic (tetra-n-butylammonium bromide and benzyltriethylammonium chloride) and inorganic (sodium perchlorate) salts, in hydrogen-bond donating (water, 1-propanol, 1-butanol and 2-propanol) and hydrogen-bond accepting (acetonitrile and dimethylsulfoxide) solvents. Although a positive halochromic response was observed in water for tetraalkylammonium salts, their thermohalochromic behavior was negligible. A negative halochromic behavior was observed for the dyes in all solvents, when the added cation was Na+. Plots of Δλmaxvs. c (Na+) allowed the apparent association constants for the solvated phenolate-cation pair to be estimated. In most cases, a positive thermohalochromism was observed in the range of 25-50°C, exceptions being the more sterically hindered phenolate dyes in the less polar solvents 2-propanol and acetonitrile. The observed variations were rationalized by invoking the effect of temperature on the phenolate-cation, phenolate-solvent and cation-solvent interactions.

Interaction of protonated merocyanine dyes with amines in organic solvents.

2,6-Diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (1a) and 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2a) were protonated in organic solvents (dichloromethane, acetonitrile, and DMSO) to form 1b and 2b, respectively. The appearance of the solvatochromic bands of 1a and 2a was studied UV-vis spectrophotometrically by deprotonation of 1b and 2b in solution in the presence of the following amines: aniline (AN), N-methylaniline (NMAN), N,N-dimethylaniline (NDAN), n-butylamine (BA), diethylamine (DEA), and triethylamine (TEA). Titrations of 1b and 2b with the amines were carried out and the binding constants were determined from the titration curves in each solvent, using a mathematical model adapted from the literature which considers the simultaneous participation of two dye: amine stoichiometries, 1:1 and 1:2. The data obtained showed the following base order for the two compounds in DMSO: BA>DEA>TEA, while aromatic amines did not cause any effect. In dichloromethane, the following base order for 1b was verified: TEA>DEA>BA≫NDAN, while for 2b the order was: TEA>DEA>BA, suggesting that 1b is more acidic than 2b. The data in acetonitrile indicated for 1b and 2b the following order for the amines: DEA>TEA>BA. The diversity of the experimental data were explained based on a model that considers the level of interaction of the protonated dyes with the amines to be dependent on three aspects: (a) the basicity of the amine, which varies according to their molecular structure and the solvent in which it is dissolved, (b) the molecular structure of the dye, and (c) the solvent used to study the system.

A simple and efficient anionic chromogenic chemosensor based on 2,4-dinitrodiphenylamine in dimethyl sulfoxide and in dimethyl sulfoxide-water mixtures.

Solutions of 2,4-dinitrodiphenylamine (1) in dimethylsulfoxide (DMSO) are colorless but upon deprotonation they become red. Addition of various anionic species (HSO(4)(-), H(2)PO(4)(-), NO(3)(-), CN(-), CH(3)COO(-), F(-), Cl(-), Br(-), and I(-)) to solutions of 1 revealed that only CN(-), F(-), CH(3)COO(-), and H(2)PO(4)(-) led to the appearance of the red color in solution. The presence of increasing amounts of water in solutions containing 1 made it progressively selective toward CN(-) and the system with the addition of 4.3% (v/v) of water was highly selective for CN(-) among all anions studied. The experimental data collected indicated that proton transfer from 1 to the anion occurs, and a model was used to explain the experimental results, which considers two 1:anion stoichiometries, 1:1 and 1:2. For the latter, the data suggest that the anion forms firstly a hydrogen-bonded complex with a second anion equivalent necessary for the abstraction of the proton, with the formation of a [HA(2)](-) complex. The study performed here demonstrates the important role of the environment of the anion and 1 for the efficiency of the chromogenic chemosensor. Besides the different affinities of each anion for water, the solvation of both the anion and 1 is responsible for reducing the interaction between these species. In small amounts, water or hydrogen-bonded DMSO-water complexes are able to stabilize the conjugated base of 1 through hydrogen bonding, making 1 more acidic, which explains the change from 1:1 and 1:2 toward 1:1 1:anion stoichiometry upon addition of water. In addition, water is able to solvate the anion and also 1, which hinders the formation of 1:1 hydrogen-bonded 1:anion complexes prior to the abstraction of the proton.

Solvent effects in the interaction of methyl-beta-cyclodextrin with solvatochromic merocyanine dyes.

The UV-vis spectroscopic behavior of dyes: 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (1) and 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2) was investigated in solutions of methyl- beta-cyclodextrin (methyl-beta-CyD), using water, methanol, ethanol, propan-2-ol, butan-1-ol, acetone, acetonitrile, N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N,N-dimethylacetamide (DMA), chloroform and dichloromethane as solvents. In aqueous solutions of dye (2) the addition of M-beta-CD leads to a bathochromic shift (of the maximum absorption), showing that the probe was transferred to a microenvironment of lower polarity and suggesting the formation of a 1 : 1 dye (2) : CyD inclusion complex, with a binding constant of 128.5 +/- 3.5 dm(3) mol(-1). Data for dye 2 in alcohols showed hypsochromic shifts, which increased in the following order: methanol < ethanol < propan-2-ol < butan-1-ol. These observations appear to reflect dye-solvent interactions through hydrogen bonding. If dye-solvent interactions are strong, the CyD-dye interactions are consequently weak, but the latter increase in importance when the dye-solvent interaction becomes weaker. With hydrogen-bond accepting solvents, data for both dyes showed clearly increasing hypsochromic shifts following the order: DMSO < DMA < DMF < acetone < acetonitrile. This order is exactly the inverse of the increasing order of basicity of the medium. This indicates that the dominant factor for the observed effects in these solvents is the solvent-CyD interaction through hydrogen bonding involving the hydroxyl groups of the CyD and the basic groups of the solvents. These interactions diminish in intensity if the basic character of the medium is reduced, increasing the capability of the dye to interact with the CyD using its phenoxide donor moiety. The largest hypsochromic shifts were obtained in chloroform (66.0 nm) and dichloromethane (67.5 nm) with dye after addition of methyl-beta-CyD. In these specific situations, solvents display weak basic and acid properties, that enhanced CyD-dye interactions to such an extent that association complexes formed through hydrogen bonding could be detected (K11) values of 24.8 +/- 4.9 dm3 mol(-1) in dichloromethane and 66.1 +/- 8.0 dm3 mol(-1) in chloroform).