Whey protein concentrate and gum tragacanth as fat replacers in nonfat yogurt: chemical, physical, and microstructural properties.

The effect of whey protein concentrate (WPC) and gum tragacanth (GT) as fat replacers on the chemical, physical, and microstructural properties of nonfat yogurt was investigated. The WPC (7.5, 15, and 20 g/L) and GT (0.25, 0.5, 0.75, and 1 g/L) were incorporated into the skim milk slowly at 40 to 45 degrees C with agitation. The yogurt mixes were pasteurized at 90 degrees C for 10 min, inoculated with 0.1% starter culture, and incubated at 42 degrees C to pH 4.6, then refrigerated overnight at 5 degrees C. A control nonfat yogurt and control full fat yogurt were prepared as described, but without addition of WPC and GT. Increasing amount of WPC led to the increase in total solids, total protein, acidity, and ash content, whereas GT did not affect chemical parameters. Increasing WPC caused a more compact structure consisting of robust casein particles and large aggregates. Firmness was increased and susceptibility to syneresis was decreased as WPC increased. No significant difference was observed for firmness and syneresis of yogurt fortified with GT up to 0.5 g/L compared with control nonfat yogurt. Increasing the amount of gum above 0.5 g/L produced softer gels with a greater tendency for syneresis than the ones prepared without it. Addition of GT led to the coarser and more open structure compared with control yogurt.

Texture of low-fat Iranian White cheese as influenced by gum tragacanth as a fat replacer.

The effect of different concentrations of gum tragacanth on the textural characteristics of low-fat Iranian White cheese was studied during ripening. A batch of full-fat and 5 batches of low-fat Iranian White cheeses with different gum tragacanth concentrations (without gum or with 0.25, 0.5, 0.75, or 1 g of gum/kg of milk) were produced to study the effects of fat content reduction and gum concentration on the textural and functional properties of the product during ripening. Cheese samples were analyzed with respect to chemical, color, and sensory characteristics, rheological parameters (uniaxial compression and small-amplitude oscillatory shear), and microstructure. Reducing the fat content had an adverse effect on cheese yield, sensory characteristics, and the texture of Iranian White cheese, and it increased the instrumental hardness parameters (i.e., fracture stress, elastic modulus, storage modulus, and complex modulus). However, increasing the gum tragacanth concentration reduced the values of instrumental hardness parameters and increased the whiteness of cheese. Although when the gum concentration was increased, the low-fat cheese somewhat resembled its full-fat counterpart, the interaction of the gum concentration with ripening time caused visible undesirable effects on cheese characteristics by the sixth week of ripening. Cheeses with a high gum tragacanth concentration became very soft and their solid texture declined somewhat.

Monitoring the chemical and textural changes during ripening of Iranian White cheese made with different concentrations of starter.

The effect of the concentration of starter inoculated to milk on the composition, free tyrosine-tryptophan content, microstructure, opacity, and fracture stress of Iranian White cheese (IWC) was studied during 50 d of ripening in brine. Three treatments of cheese were made using 1-fold (IWC1S), 2-fold (IWC2S), and 4-fold (IWC4S) concentrations of a direct-to-vat mesophilic mixed culture containing Lactococcus lactis ssp. cremoris and Lactococcus lactis ssp. lactis as starter. As ripening progressed, moisture and protein contents of the treatments continuously decreased, whereas their total ash, salt, and salt in moisture contents increased. Fat content and pH of cheeses remained stable during ripening. The pH of cheese milk at the time of renneting, which decreased by increasing the concentration of starter (6.57, 6.49, and 6.29 for IWC1S, IWC2S, and IWC4S, respectively), significantly affected most of the chemical characteristics and opacity of cheese. Lower pH values at renneting decreased moisture and ash contents, whereas cheese protein content increased. The concentration of free tyrosine-tryptophan in curd increased at first 29 d but decreased between d 29 and 49 of aging. The changes observed in cheese whiteness followed the changes in moisture content of the treatments. As the concentration of starter inoculated to milk increased, the value of fracture stress at a given ripening time significantly decreased, leading to a less resistant body against applied stress. A similar trend was also observed for fracture strain during cheese ripening. The micrographs taken by scanning electron microscopy provided a meaningful explanation for decrease in the value of fracture stress. As the cheese ripening progressed or the concentration of starter increased, the surface area occupied by the protein fraction in cheese microstructure decreased, leading the way to lower the force-bearing component in cheese texture.

Microstructure and rheological properties of Iranian white cheese coagulated at various temperatures.

The effect of milk coagulation temperature on the composition, microstructure monitored using scanning electron micrographs, opacity measured by a Hunter lab system, and rheological behavior measured by uniaxial compression and small amplitude oscillatory shear were studied. Three treatments of Iranian White cheese were made by applying coagulation temperatures of 34, 37, and 41.5 degrees C during the cheese-making procedure. A higher coagulation temperature resulted in increased fat and protein contents, and decreased the moisture content and ratio of moisture to protein. The highest temperature (41.5 degrees C) had a significant effect on the opacity of Iranian White cheese. Milk coagulation at this temperature decreased the whiteness index (Hunter L value) and increased the yellowness index (Hunter b value) of the aged product compared with cheeses coagulated at lower temperatures. Microstructure of the cheese coagulated at 41.5 degrees C was more compact and undisturbed, reflecting the higher values of stress at fracture and storage modulus measured for this treatment.

Rheology, microstructure, and functionality of low-fat Iranian white cheese made with different concentrations of rennet.

A batch of full-fat (23% target fat) and 3 batches of low-fat (6% target fat) Iranian white cheese with different rennet concentrations (1-, 2-, and 3-fold the normal usage) were produced to study the effect of fat content reduction and promoted proteolysis on the textural and functional properties of the product. Cheese samples were analyzed with respect to their rheological parameters (uniaxial compression and small amplitude oscillatory shear), meltability, microstructure, and sensory characteristics. Reduction of fat content from 23 to 6% had adverse effects on the texture, functionality, cheese-making yield, and sensory characteristics of Iranian white cheese. Fat reduction increased the instrumental hardness parameters (storage modulus, stress at fracture, and Young's modulus of elasticity), decreased the cheese meltability and yield, and made the microstructure more compact. Doubling the rennet concentration reduced values of instrumental hardness parameters, increased the meltability, and improved the sensory impression of texture. Although increasing the rennet concentration to 2-fold the normal usage resembled somewhat the low-fat cheese to its full-fat counterpart, it appeared to cause more reduction in yield. Increasing the rennet concentration 3-fold the normal usage produced a product slightly more elastic than the low-fat cheese with normal concentration of rennet. Increasing the rennet concentration to 2-fold the normal usage was useful for improving the textural, functional, and sensory properties of low-fat Iranian white cheese.