ABSTRACT
Vortex-based hydrodynamic cavitation devices are being used in a wide range of applications. However, adequate information on the design of such devices is not available. In this work, we have computationally investigated the influence of key design parameters such as the aspect ratio of the vortex chamber, the number of tangential inlets and the shape of the device on resulting flow characteristics and cavitation. Experiments were carried out to validate key findings from the computational studies. These investigations revealed that the aspect ratio of the vortex chamber as six may be considered as optimum. The performance of single and multiple inlet devices was found to be comparable at the same pressure drop (that is at same energy consumption per m3). Scale-up with a geometric similarity led to a reduction in the extent of cavitation for same energy consumption per m3. For facilitating scale-out option, an attempt was made to simplify the configuration of the vortex-based cavitation device. Computational results indicated that the cavitation performance of simplified configuration was not significantly inferior. A case of the formation of liquid-liquid emulsion was taken as a test case for evaluation of a modified cavitation device based on the present investigations. The droplet size distributions of emulsions generated by both the devices indicate that the proposed simplified configuration, which may facilitate fabrication and offer integrated scale-out options, performs almost at par with a complex configuration. The presented results will be useful for optimising designs of vortex-based hydrodynamic cavitation devices/ reactors.
ABSTRACT
Fluidic oscillators (FOs) are used in a variety of applications, including process control and process intensification. Despite the simple design and operation of FOs, the fluid dynamics of FOs exhibit rich complexities. The inherently unstable flow, jet oscillations, and resulting vortices influence mixing and other transport processes. In this work, we computationally investigated the fluid dynamics of a new design of a planar FO with backflow limbs. The design comprised of two symmetric backflow limbs leading to bistable flow. The unsteady flow dynamics, internal recirculation, jet oscillations, secondary flow vortices were computationally studied over a range of inlet Reynolds numbers (2400-12,000). The nature and frequency of the jet oscillations were quantified. The computed jet oscillation frequency was compared with the experimentally measured (using imaging techniques) jet oscillation frequency. The flow model was then used to quantitatively understand mixing, heat transfer, and residence time distribution. The approach and the results presented in this work will provide a basis for designing FO's with desired flow and transport characteristics for various engineering applications.
