Carbon dots decorated cadmium sulphide heterojunction-nanospheres for the enhanced visible light driven photocatalytic dye degradation and hydrogen generation.

Carbon dots (C-dots) developed from beetroot is used for the rational design of cadmium sulphide based heterojunction photocatalysts (C-dots@CdS) using hydrothermal technique. The crystal structure, phase, morphology and optical characteristics of the synthesised materials are determined using X-ray diffraction (XRD), High resolution transmission electron microscopy (HR-TEM), Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, UV-Visible diffuse reflectance spectroscopy (UV-DRS), photoluminescence spectroscopy (PL spectroscopy), BET adsorption, X-ray photoelectron spectroscopy (XPS) and electrochemical studies. Using C-dots@CdS catalytic system, a superior photocatalytic activity relative to the undecorated CdS is observed. Among the C-dots@CdS samples, the CdS loaded with 6 wt% of C-dots exhibited enhanced hydrogen evolution rate compared with other samples considered for the study. CdS nanospheres modified with C-dots (6 wt%) resulted in the photocatalytic hydrogen evolution rate of 1582 µmolg-1 against 849 µmolg-1 evolution rate obtained for CdS nanospheres within 3 h. In spite of being 0D/0D type nano-heteroarchitecture, C-dots@CdS system obtained an apparent quantum yield of 6.37 % for the catalytic dosage of 20 mg under the irradiation of visible light. CdS in the C-dots@CdS system serves as the light harvester while C-dots with discernible edges can maintain the continuous supply of photo-excited charge carriers and hence can reduce the charge-carrier recombination. Further, the photodegradation of crystal violet dye using the optimised dosage of C-dots@CdS-6 exhibited an efficiency of 97.3 % in 120 min of visible light irradiation under neutral conditions. The detailed kinetic study reveals that the mechanism of photodegradation of crystal violet dye using C-dots@CdS system can be described using pseudo-second-order kinetics. The presence of oxygen rich hydrophilic surface functionalities of C-dots, the formation of near-surface heterojunction and the suitable band structure of C-dots@CdS system leading to the optimum charge carrier separation kinetics can be attributed to the enhanced photocatalytic performance. This work offers a promising strategy to develop bio-derived C-dots based heterojunction photocatalyst to address the burgeoning energy and environmental demands.

A comparative study with biologically and chemically synthesized nZVI: applications in Cr (VI) removal and ecotoxicity assessment using indigenous microorganisms from chromium-contaminated site.

In the present communication, we report a comparative study of Cr (VI) removal using biologically synthesized nano zero valent iron (BS-nZVI) and chemically synthesized nZVI (CS-nZVI), both immobilized in calcium alginate beads. The parameters like initial Cr (VI) concentration, nZVI concentration, and the contact time for Cr (VI) removal were optimized based on Box-Behnken design (BBD) by response surface modeling at a constant pH 7. Under the optimized conditions (concentration of nZVI = 1000 mg L(-1), contact time = ∼ 80 min, and initial concentration of Cr (VI) = 10 mg L(-1)), the Cr (VI) removal by the immobilized BS-nZVI and CS-nZVI alginate beads was 80.04 and 81.08 %, respectively. The adsorption of Cr (VI) onto the surface of alginate beads was confirmed by scanning electron microscopy with energy-dispersive x-ray spectroscopy (SEM-EDX), Fourier transform infrared spectroscopy (FT-IR), and Brunauer-Emmett-Teller (BET) analysis. The applicability of the process using both the sorbents was successfully test medium Cr (VI) spiked environmental water samples. In order to assess the ecotoxic effects of nZVI, the decline in cell viability, generation of intracellular reactive oxygen species (ROS), cell membrane damage, and biouptake was studied at 1000 mg L(-1) concentration, with five indigenous bacterial isolates from chromium-contaminated lake sediments and their consortium.

Cytotoxicity of ZnO NPs towards fresh water algae Scenedesmus obliquus at low exposure concentrations in UV-C, visible and dark conditions.

Continuous increase in the usage of ZnO nanoparticles in commercial products has exacerbated the risk of release of these particles into the aquatic environment with possible harmful effects on the biota. In the current study, cytotoxic effects of two types of ZnO nanoparticles, having different initial effective diameters in filtered and sterilized lake water medium [487.5±2.55 nm for ZnO-1 NPs and 616.2±38.5 nm for ZnO-2 NPs] were evaluated towards a dominant freshwater algal isolate Scenedesmus obliquus in UV-C, visible and dark conditions at three exposure concentrations: 0.25, 0.5 and 1 mg/L. The toxic effects were found to be strongly dependent on the initial hydrodynamic particle size in the medium, the exposure concentrations and the irradiation conditions. The loss in viability, LDH release and ROS generation were significantly enhanced in the case of the smaller sized ZnO-1 NPs than in the case of ZnO-2 NPs under comparable test conditions. The toxicity of both types of ZnO NPs was considerably elevated under UV-C irradiation in comparison to that in dark and visible light conditions, the effects being more enhanced in case of ZnO-1 NPs. The size dependent dissolution of the ZnO NPs in the test medium and possible toxicity due to the released Zn(2+) ions was also noted. The surface adsorption of the nanoparticles was substantiated by scanning electron microscopy. The internalization/uptake of the NPs by the algal cells was confirmed by fluorescence microscopy, transmission electron microscopy, and elemental analyses.

Titamium oxide (TiO2) assisted photocatalytic degradation of methylene blue.

The aqueous solution of methylene blue (MB) has been subjected to Photocatalytic degradation by UV radiation in presence of TiO2 photo-catalyst containing different concentrations of H2O2. The experiments conducted at different dye concentrations (12 and 20 ppm), catalyst loading, pH and H2O2 dosage (1-10 ml l(-1)), revealed that the degradation rate is strongly influenced by respective experimental parameters. However the influence of catalyst alone is not predominant in degradation. The decolorization of dye proceed to near completeness when H2O2 is used. The best degradation results are observed at 0.1 wt% of catalyst loading at pH 2 for TiO2/UV system. It has been found that the optimum concentration of H2O2 for 12 ppm and 20 ppm amount of the dye was 2 ml l(-1) for UV/H2O2 system. The kinetic of degradation of the dye followed the pseudo first order rate. The degradation studies using TiO2/UV/H2O2 system, indicates enhancement in the degradation rate of the dye compared to that of UV/H2O2 system alone.