ABSTRACT
BackgroundThe sensitivity of commercially available RT-PCR assays varies over 10,000 fold, ranging from 10 to 20,000 viral copies/ml. The reporting of high Ct value results has been under scrutiny, as the clinical significance of these values is not yet completely understood. The early detection of infected individuals (high Ct results) in the pre-symptomatic phase of the disease using highly sensitive RT-PCR methods has been argued as a strategy to prevent transmission, while on the contrary, the reporting of high Ct has been criticized as false-positive results causing unnecessary testing and having several negative implications. The purpose of this study was to verify the presence of SARS-CoV-2 genomes in samples with a wide range of RT-PCR Ct values including samples with high Ct (37 to 42) using next-generation sequencing (NGS). MethodsThe study evaluated a total of 547 previously positive samples tested with the PerkinElmer(R) New Coronavirus Nucleic Acid Detection RT-PCR kit. The samples included in this study ranged from Ct values of 17-42, with 44 samples having a Ct > 37. Of the 547 samples, 149 were sequenced using PerkinElmer NEXTFLEX Variant-Seq SARS-CoV2 assay on NovaSeq 6000, and 398 samples were sequenced using Illumina SARS-CoV-2 respiratory viral panel kits using the NextSeq 500/550 system. ResultsBetween the two clinical laboratories, a total of [~]1.95 million samples were tested using the FDA-EUA PerkinElmer(R) New Coronavirus RT-PCR assay. Of the 1.95 million samples, [~]1.72 million were negative, [~]250,000 positive, and [~]16,500 in the range of 37-42. Of the 547 samples sequenced, the percentage of sequencing reads that aligned to the SARS-CoV-2 Wuhan-hu-1 reference genome (NC_045512.2) ranged from 25.5% to 99.69%. All samples sequenced showed high sequence specificity to the SARS-CoV-2 virus. Low Ct samples showed complete uniform coverage across the entire 29kb SAR-CoV-2 genome. The average coverage in samples with high Ct (>37) was found to be 55.5% (range 16.1-99.2%). However, as sample Ct increased, a gradual decrease in coverage uniformity was observed for few samples. ConclusionThis study demonstrates for the first time that the viral RNA is present in the high Ct value range of 37-42 and the sequence is unique to SARS-CoV-2 confirmed using two separate sequencing assays. This confirms that the detected Ct values are reflective of the presence of the SARS-CoV-2 virus and they are not an artifact or contamination. In light of the recent work highlighting the majority of transmission being pre-symptomatic/ asymptomatic, and high Ct results being observed at both the early and late phases of infection warrants further investigation into the clinical utility of high Ct results to curtail the spread of the virus.
ABSTRACT
BackgroundThe COVID-19 pandemic has resulted in a significant diversion of human and material resources to COVID-19 diagnostics, to the extent that testing of viral pathogens normally contributing to seasonal respiratory tract infections have been markedly neglected. The global health burden due to influenza viruses and co-infection in COVID-19 patients remains undocumented but clearly pose serious public health consequences. To address these clinical and technical challenges, we have optimized and validated a highly sensitive RT-PCR based multiplex assay for the detection of SARS-CoV-2, Influenza A and B viruses in a single test. MethodsThis study evaluated clinical specimens (n=1411) that included 1019 saliva and 392 nasopharyngeal swab (NPS) samples collected in either healthcare or community setting. Samples were tested using two assays: FDA-EUA approved SARS-CoV-2 assay that targets N and ORF1ab gene, and the PKamp RT-PCR based assay that targets SARS-CoV-2, Influenza viruses A and B. The limit of detection (LoD) studies was conducted as per the FDA guidelines using SARS-CoV-2 and Influenza A and B reference control materials. ResultsOf the 1019 saliva samples, 17.0% (174/1019) tested positive for SARS-CoV-2 using either assay. The detection rate for SARS-CoV-2 was higher with our multiplex assay compared to SARS-specific assay [91.9% (160/174) vs. 87.9% (153/174)], respectively. Of the 392 NPS samples, 10.4% (41/392) tested positive for SARS-CoV-2 using either assay. The detection rate for SARS-CoV-2 was higher with our multiplex assay compared to SARS-specific assay [97.5% (40/41) vs. 92.1% (39/41)], respectively. The Ct values for SARS-CoV-2 were comparable between the two assays, whereas the Ct values of the housekeeping gene was significantly lower with multiplex assay compared to SARS-specific assay. The LoD was established as 60 copies/ml for SARS-CoV-2 and 180 copies/ml for Influenza A and B viruses for both saliva and NPS samples. ConclusionThis study presents clinical validation of a multiplex PCR assay for testing SARS-CoV-2, Influenza A and B viruses, using NPS and saliva samples, and demonstrates the feasibility of implementing the assay without disrupting the existing laboratory workflow. This novel assay uses the same instruments, sample types, supplies, and laboratory personnel as needed for the testing of SARS-CoV-2 virus.
ABSTRACT
BackgroundThe limitations of widespread current COVID-19 diagnostic testing lie at both pre-analytical and analytical stages. Collection of nasopharyngeal swabs is invasive and is associated with exposure risk, high cost, and supply-chain constraints. Additionally, the RNA extraction in the analytical stage is the most significant rate-limiting step in the entire testing process. To alleviate these limitations, we developed a universal saliva processing protocol (SalivaSTAT) that would enable an extraction free RT-PCR test using any of the commercially available RT-PCR kits. MethodsWe optimized saliva collection devices, heat-shock treatment and homogenization. The effect of homogenization on saliva samples for extraction-free RT-PCR assay was determined by evaluating samples with and without homogenization and preforming viscosity measurements. Saliva samples (872) previously tested using the FDA-EUA method were reevaluated with the optimized SalivaSTAT protocol using two widely available commercial RT-PCR kits. Further, a five-sample pooling strategy was evaluated as per FDA guidelines using the SalivaSTAT protocol. ResultsThe saliva collection (done without any media) performed comparable to the FDA-EUA method. The SalivaSTAT protocol was optimized by incubating saliva samples at 95{degrees}C for 30-minutes and homogenization, followed by RT-PCR assay. The clinical sample evaluation of 630 saliva samples using the SalivaSTAT protocol with PerkinElmer (600-samples) and CDC (30-samples) RT-PCR assay achieved positive (PPA) and negative percent agreement (NPA) of 95.8% and 100%, respectively. The LoD was established as [~]20-60 copies/ml by absolute quantification. Further, a five-sample pooling evaluation using 250 saliva samples achieved a PPA and NPA of 92% and 100%, respectively. ConclusionWe have optimized an extraction-free direct RT-PCR assay for saliva samples that demonstrated comparable performance to FDA-EUA assay (Extraction and RT-PCR). The SalivaSTAT protocol is a rapid, sensitive, and cost-effective method that can be adopted globally, and has the potential to meet testing needs and may play a significant role in management of the current pandemic.
ABSTRACT
The current gold-standard molecular diagnosis for COVID-19 is based on a multi-step assay involving RNA-extraction and RT-PCR analysis for the detection of SARS-CoV-2. RNA-extraction step has been a major rate-limiting step in implementing high-throughput screening for COVID-19 during this pandemic. Moreover, clinical laboratories are facing several challenges that include cost, reagents, instrumentation, turn-around time, trained personnel, and supply-chain constraints to efficiently implement and sustain testing. Cognizant of these limitations, we evaluated the extraction-free methods described in the literature and have developed an innovative, simplified and easy protocol employing limited reagents to extract RNA for subsequent RT-PCR analysis. Nasopharyngeal-swab samples were subjected to the following individual conditions: 65{degrees}C for 15 minutes; 80{degrees}C for 5 minutes; 90{degrees}C for 5 minutes or 80{degrees}C for 1 minute, and processed for direct RT-PCR. These groups were also compared with a supplemental protocol adding isopropanol-ethanol-water elution steps followed by RT-PCR assay. The direct RT-PCR assay did not detect SARS-CoV-2 within the various temperature incubation only groups, whereas, the 90{degrees}C for 5 minutes-isopropanol-ethanol-water method was found to be comparable to the FDA-EUA method. Evaluation of the performance metrics for 100 clinical samples demonstrated a sensitivity of 94.2% and a specificity of 100%. The limit of detection was ascertained to be [~]40 copies/ml by absolute-quantification. The protocol presented for this assay employs limited reagents and yields results with high sensitivity. Additionally, it presents a simplified methodology that would be easier to implement in laboratories in limited resource countries in order to meet the high current COVID-19 testing needs.
