Silica-based scintillators: basic properties of radioluminescence kinetics.

Radioluminescent silica-based fiber dosimeters offer great advantages for designing miniaturized realtime sensors for high dose-rate dosimetry. Rise and fall kinetics of their response must be properly understood to better assess their performances in terms of measurement speed and repeatability. A standard model of radioluminescence (RL) has already been quantitatively validated for doped silica glasses, but beyond conclusive comparisons with specific experiments, a comprehensive understanding of the processes and parameters determining transient and equilibrium kinetics of RL is still lacking. We analyze in detail the kinetics inherent in the standard RL model. Several asymptotical regimes in the RL growth are demonstrated in the case of a pristine sample (succesive quadratic, linear and power-law time dependencies before the plateau is reached). We show how this situation is modified when a pre-irradiation partly fills traps beforehand. RL growth is then greatly accelerated because of the pre-formation of recombination centers (RCs) from dopant ions, but not due to pre-filling of trapping levels. In all cases, the RL intensity eventually tends to a constant level equal to the pair generation rate, long before all carrier densities themselves reach equilibrium. This occurs late under irradiation, when deep traps get to saturation. The fraction of dopants converted into RCs is then 'frozen' at a lower level the smaller the density of deep traps. Controlling RL kinetics through the engineering of material traps is not an option. Pre-irradiation appears to be the simplest way to obtain accelerated and repeatable kinetics.

Effects of Measurement Temperature on Radioluminescence Processes in Cerium-Activated Silica Glasses for Dosimetry Applications.

Cerium-doped-silica glasses are widely used as ionizing radiation sensing materials. However, their response needs to be characterized as a function of measurement temperature for application in various environments, such as in vivo dosimetry, space and particle accelerators. In this paper, the temperature effect on the radioluminescence (RL) response of Cerium-doped glassy rods was investigated in the 193-353 K range under different X-ray dose rates. The doped silica rods were prepared using the sol-gel technique and spliced into an optical fiber to guide the RL signal to a detector. Then, the experimental RL levels and kinetics measurements during and after irradiation were compared with their simulation counterparts. This simulation is based on a standard system of coupled non-linear differential equations to describe the processes of electron-hole pairs generation, trapping-detrapping and recombination in order to shed light on the temperature effect on the RL signal dynamics and intensity.

Detectors assessment for stereotactic radiosurgery with cones.

The purpose of this work is to assess eight detectors performance for output factor (OF), percent depth dose (PDD), and beam profiles in a 6-MV Clinac stereotactic radiosurgery mode for cone irradiation using Monte Carlo simulation as reference. Cones with diameters comprised between 30 and 4 mm have been studied. The evaluated detectors were ionization chambers: pinpoint and pinpoint 3D, diodes: SRS, P and E, Edge, MicroDiamond and EBT3 radiochromic films. The results showed that pinpoints underestimate OF up to -2.3% for cone diameters ≥10 mm and down to -12% for smaller cones. Both nonshielded (SRS and E) and shielded diodes (P and Edge) overestimate the OF respectively up to 3.3% and 5.2% for cone diameters ≥10 mm and in both cases more than 7% for smaller cones. MicroDiamond slightly overestimates the OF, 3.7% for all the cones and EBT3 film is the closest to Monte Carlo with maximum difference of ±1% whatever the cone size is. For the profiles and the PDD, particularly for the small cones, the size of the detector predominates. All diodes and EBT3 agree with the simulation within ±0.2 mm for beam profiles determination. For PDD curve all the active detectors response agree with simulation up to 1% for all the cones. EBT3 is the more accurate detector for beam profiles and OF determinations of stereotactic cones but it is restrictive to use. Due to respectively inappropriate size of the sensitive volume and composition, pinpoints and diodes do not seem appropriate without OF corrective factors below 10 mm diameter cone. MicroDiamond appears to be the best detector for OF determination regardless all cones. For off-axis measurements, the size of the detector predominates and for PDD all detectors give promising results.

Capping of marine sediments with valuable industrial by-products: Evaluation of inorganic pollutants immobilization.

In-situ capping of polluted sediment is considered as an inexpensive and effective treatment technology to immobilize contaminants in a short time. In this remediation technique sediments are capped by placing a layer of sand, clean sediment or other materials over sediments in order to mitigate risk. In this study, low cost industrial by products (bauxaline, steel slag, and mixture of the two products) were applied as capping agents. A bench scale laboratory experiment in aquariums was performed to evaluate their effects on Cd, Zn, As, and Cr mobility from an artificially contaminated marine sediment. Without capping, all the contaminants are constantly released with various kinetic depending of mineral oxidation or dissolution or leaching. Nevertheless, release did not exceed 31% of the initial amount of pollutant. Capping sediment with steel slag, bauxaline and their mixture totally captured Cd, Zn, and As. In the case of Cr, only steel slag actively blocked its release. A kinetic model was developed to model As and Cr release, with and without capping. The release times for Cr and As from the sediment were close to 6 days. In the presence of capping agents, the capture time for Cr was found to be 57 days for steel slag, and 7 days for bauxaline. Despite a high capture time, steel slag was the best capping agent since bauxaline matrix was a source of Cr and rapidly released it (release time = 1 day). The results indicated that steel slag and its mixture additive can be used as potential capping materials for the remediation of contaminated sites due to their significant entrapping of Cd, Zn, As, and Cr.

Steady photodarkening of thulium alumino-silicate fibers pumped at 1.07 µm: quantitative effect of lanthanum, cerium, and thulium.

By pumping thulium-doped silica-based fibers at 1.07 µm, rapid generation of absorbing centers leads to photoinduced attenuation (PIA). This detrimental effect prevents exploiting laser emissions in the visible and near infrared. We report on the characterization of the PIA versus the fiber core composition, particularly the concentration of thulium (Tm), lanthanum (La), and cerium (Ce) ions. We show that UV emission induced by Tm-Tm energy transfers is the source of photodarkening and that lanthanum and cerium are efficient hardeners against PIA.

Interplay between photo- and radiation-induced darkening in ytterbium-doped fibers.

This Letter demonstrates a remarkable interplay between photo- and radiation-induced darkening of ytterbium-doped alumino-silica optical fibers operated in amplifying conditions and harsh environments (as, e.g., in space-based applications). Influences of the pump power, ionizing dose, and dose rate on this interaction are characterized. The pump is capable of accelerating or slowing down the radiation-induced darkening build-up depending on the ionizing dose. The steady-state photo-radio-darkening level is independent of the dose and at least equal to the equilibrium level of pure photo-darkening. This lower limit is notably reached at low dose rates, including those encountered in space. We, therefore, argue that photo-resistant ytterbium-doped fibers will resist against a space mission, whatever the dose.

Experimental evidence of Er³âº ion reduction in the radiation-induced degradation of erbium-doped silica fibers.

The gain of erbium-doped fiber amplifiers is damaged by irradiation partly because of creation of color centers responsible of excess absorption at pump and signal wavelengths. Based on the combination of thermally stimulated luminescence and spectrophotometry, this Letter demonstrates that a part of the gain loss should be associated with the reduction of the density of Er3+ ions by irradiation.

Thermoluminescence characterization of traps involved in the photodarkening of ytterbium-doped silica fibers.

The photodarkening (PD) mechanisms of ytterbium-doped silica optical fibers have still not been elucidated, although hardening routes have been proposed. Most basic questions are still under debate about the assignment of the darkening excitation bands into the UV range, the nature of absorbing centers (photoionized centers or trapped carriers?), or of traps accepting photo-released carriers (electron or hole traps?). We used thermoluminescence measurements to characterize traps populated by different radiation types. It is notably demonstrated that photodarkening involves silica hole traps. The popular idea that color centers are formed upon carrier trapping is not consistent with our observations.