Enhancement of Aggregate Formation Through Aromatic Compound Adsorption in Elastin-like Peptide (FPGVG)5 Analogs.

Elastin-like peptides (ELPs) exhibit temperature-dependent reversible self-assembly. Repetitive sequences derived from elastin, such as Val-Pro-Gly-Val-Gly (VPGVG), are essential for the self-assembly of ELPs. Previously, we developed (FPGVG)5 (F5), in which the first valine residue in the VPGVG sequence was replaced with phenylalanine, which showed strong self-aggregation ability. This suggests that interactions through the aromatic amino acid residues of ELPs could play an important role in self-assembly. In this study, we investigated the thermoresponsive behavior of F5 analogs in the presence of aromatic compounds. Turbidimetry, spectroscopy, and fluorescence measurements demonstrated that aromatic compounds interacted with F5 analogs below the transition temperature and enhanced the self-assembly ability of ELPs by stabilizing amyloid-like structures. Furthermore, quantitative high-performance liquid chromatography analyses showed that the F5 analogs could adsorb and remove hydrophobic aromatic compounds from aqueous solutions during aggregate formation. These results suggested that the F5 analogs can be applicable as scavengers of aromatic compounds.

Determining the Sequence Dependency of Self-Assembly of Elastin-Like Peptides Using Short Peptide Analogues with Shuffled Repetitive Sequences.

Synthetic elastin-like peptides (ELPs) that possess characteristic tropoelastin-derived hydrophobic repetitive sequences, such as (VPGVG)n, exhibit thermoresponsive reversible self-assembly. Although their thermoresponsive properties have been well-studied, the sequence-dependent and structural requirements for self-assembly remain ambiguous. In particular, it is still unclear whether the amino acid sequences derived from tropoelastin are necessary for self-assembly. In this study, 11 sequence-shuffled ELP analogues based on (FPGVG)5, which is a previously developed short ELP (sELP), were designed to elucidate the sequence-dependent and structural requirements for their self-assembly. Among them, eight shuffled peptides exhibited self-assembling properties, whereas the other three peptides were difficult to dissolve in water. Structural analyses revealed that the structural characteristics of the three insoluble peptides were different from those of their thermoresponsive analogues. Furthermore, the secondary structures of the peptide analogues possessing the self-assembly abilities were different from each other. These results suggest that the potential for self-assembly and water solubility of sELPs depend on the primary structure in each repeated unit. Moreover, several shuffled analogues exhibited more potent self-assembling properties than the original (FPGVG)5, indicating that shorter ELPs can be obtained using their novel motifs as repetitive units. We also observed that the presence of Pro-Gly sequence in the repeating units was advantageous in terms of peptide solubility. Although further analysis will be necessary to elucidate the molecular mechanism underlying the self-assembly of these sELPs, this study provides insights into the relationship between the amino acid sequence and the self-assembling ability of the peptides for developing new sELPs for various applications.

Development of the efficient preparation method for thermoresponsive elastin-like peptides using liquid-phase synthesis combined with fragment condensation strategy.

Elastin-like peptides (ELPs) are synthetic peptides that mimic the characteristic hydrophobic amino acid repeat sequences of elastin and exhibit temperature-dependent reversible self-assembly properties. ELPs are expected to be used as temperature-responsive biomolecular materials across diverse industrial and research fields, and there is a requirement for a straightforward method to mass-produce them. Previously, we demonstrated that phenylalanine-containing ELP analogs, namely, (FPGVG)n , can undergo coacervation with short chains (n = 5). The Fmoc solid-phase peptide synthesis method is one strategy used to synthesize these short ELPs. However, owing to its low reaction efficiency, an efficient method for preparing ELPs is required. In this study, efficient preparation of ELPs was investigated using a liquid-phase synthesis method with a hydrophobic benzyl alcohol support (HBA-tag). Because HBA-tags are highly hydrophobic, they can be easily precipitated by the addition of poor solvents and recovered by filtration. This property allows the method to combine the advantages of the simplicity of solid-phase methods and the high reaction efficiency of liquid-phase methods. By utilizing liquid-phase fragment condensation with HBA-tags, short ELPs were successfully obtained in high yield and purity. Finally, the temperature-dependent response of the ELPs generated through fragment condensation was assessed using turbidity measurements, which revealed a reversible phase transition. Consequently, the ELPs exhibited a reversible phase transition, indicating successful synthesis of ELPs via fragment preparation with tags. These findings provide evidence of the potential for mass production of ELPs using this approach.

Suitability of high-molecular-weight tissue-derived elastin polypeptides and their particles as cosmetic biomaterials.

We aimed to determine the coacervation properties of high-molecular-weight (HMW) tissue-derived elastin (TDE) and to examine the potential use of TDE particles as a cosmetic biomaterial. TDE solutions were filtered and divided into three fractions (1-3) according to the molecular weight of the elastin. The turbidity of fraction 2, which contained a large portion (58%) of HMW elastin polypeptides (>100 kDa), was measured under several pH values (3.0-11.0) and NaCl concentrations (0-1000 mM) to examine its coacervation ability. HMW TDE exhibited coacervation under the physiological conditions (temperature, pH, and NaCl concentration) of the skin surface. We performed inclusion and release experiments using three model chemicals with different molecular weights and measured the size and zeta potential of the fraction 3 particles to investigate the suitability of HMW elastin polypeptides. Fraction 3, which contained a larger portion (64%) of HMW elastin polypeptides, displayed a strong coacervation property at a phase transition temperature of 19.8 ± 0.1°C. The inclusion ratio of the model chemical Biebrich Scarlet (BS) with a molecular weight of <600 was approximately 92.1 ± 0.7%. The release profiles of BS from the particles linearly increased and reached a plateau after 15 days. Moreover, the average size of the particles with BS was 474.2 ± 24.6 nm. The low-molecular-weight (LMW) elastin peptides have moisturizing and whitening functions for the skin. We concluded that TDE, as a mixture of HMW polypeptides and LMW peptides, can potentially serve as a multifunctional and effective cosmetic biomaterial.

Branched short elastin-like peptides with temperature responsiveness obtained by EDTA-mediated multimerization.

Elastin-like peptides (ELPs) exhibit a reversible phase transition, known as coacervation, triggered by temperature changes. This property makes them useful as stimuli-responsive molecular materials for various applications. Among ELPs, short peptide chain lengths have some advantages over long peptide chain lengths because short ELPs can be easily obtained by chemical synthesis, allowing the use of various amino acids, including D-type and unnatural amino acids, at any position in the sequence. Moreover, the incorporated amino acids readily affect the temperature-responsive behavior of ELPs. However, to be utilized in various applications, it is necessary to develop short ELPs and to investigate their temperature-responsive properties. To obtain further insights into the temperature-responsive behavior of the short ELPs, we investigated branched short ELP analogs composed of (FPGVG)n chains (n = 1 or 2, abbreviated as F1 and F2, respectively). We synthesized multimers composed of four F1 chains or two to four F2 chains using ethylenediaminetetraacetic acid (EDTA) as a central component of multimerization. Our results show that the multimers obtained exhibited coacervation in aqueous solutions whereas linear F1 or F2 did not. Furthermore, the structural features of the obtained multimers were the same as those of linear (FPGVG)4 . In this study, we demonstrated that molecules capable of coacervation can be obtained by multimerization of F1 or F2. The temperature-responsive molecules obtained using short ELPs make it possible to use them as easy-to-synthesize peptide tags to confer temperature responsiveness to various molecules, which will aid the development of temperature-responsive biomaterials with a wide variety of functions.

Development of truncated elastin-like peptide analogues with improved temperature-response and self-assembling properties.

Functional peptides, which are composed of proteinogenic natural amino acids, are expected to be used as biomaterials with minimal environmental impact. Synthesizing a functional peptide with a shorter amino acid sequence while retaining its function is a easy and economical strategy. Furthermore, shortening functional peptides helps to elucidate the mechanism of their functional core region. Truncated elastin-like peptides (ELPs) are peptides consisting of repetitive sequences, derived from the elastic protein tropoelastin, that show the thermosensitive formation of coacervates. In this study, to obtain shortened ELP analogues, we synthesized several (Phe-Pro-Gly-Val-Gly)n (FPGVG)n analogues with one or two amino acid residues deleted from each repeat sequence, such as the peptide analogues consisting of FPGV and/or FPG sequences. Among the novel truncated ELP analogues, the 16-mer (FPGV)4 exhibited a stronger coacervation ability than the 25-mer (FPGVG)5. These results indicated that the coacervation ability of truncated ELPs was affected by the amino acid sequence and not by the peptide chain length. Based on this finding, we prepared Cd2+-binding sequence-conjugated ELP analogue, AADAAC-(FPGV)4, and found that it could capture Cd2+. These results indicated that the 16-mer (FPGV)4 only composed of proteinogenic amino acids could be a new biomaterial with low environmental impact.

Flexible customization of the self-assembling abilities of short elastin-like peptide Fn analogs by substituting N-terminal amino acids.

Elastin-like peptides (ELPs) are thermoresponsive biopolymers inspired by the characteristic repetitive sequences of natural elastin. As ELPs exhibit temperature-dependent reversible self-assembly, they are expected to be biocompatible thermoresponsive materials for drug delivery carriers. One of the most widely studied ELPs in this field is the repetitive pentapeptide, (VPGXG)n . We previously reported that phenylalanine-containing ELP (Fn) analogs, in which the former Val residue of the repetitive sequence (VPGVG)n is replaced by Phe, show coacervation with a short chain length (n = 5). Owing to their short sequences, Fn analogs are easily modified in amino acid sequences via simple chemical synthesis, and are useful for investigating the relationship between peptide sequences and temperature responsiveness. In this study, we developed Fn analogs by replacing Phe residue(s) with other amino acids or introducing another amino acid at the N-terminus. The temperature responsiveness of the Fn analogs changed drastically with the substitution of a single Phe residue, suggesting that aromatic amino acids play an important role in their self-assembly. In addition, the self-assembling ability of Fn was enhanced by increasing the bulkiness of the N-terminal amino acids. Therefore, the N-terminal residue was considered to be important for hydrophobicity-induced intermolecular interactions between the peptides during coacervation.

Metal ion scavenging activity of elastin-like peptide analogues containing a cadmium ion binding sequence.

The development of simple and safe methods for recovering environmental pollutants, such as heavy metals, is needed for sustainable environmental management. Short elastin-like peptide (ELP) analogues conjugated with metal chelating agents are considered to be useful as metal sequestering agents as they are readily produced, environment friendly, and the metal binding domain can be selected based on any target metal of interest. Due to the temperature dependent self-assembly of ELP, the peptide-based sequestering agents can be transformed from the solution state into the particles that chelate metal ions, which can then be collected as precipitates. In this study, we developed a peptide-based sequestering agent, AADAAC-(FPGVG)4, by introducing the metal-binding sequence AADAAC on the N-terminus of a short ELP, (FPGVG)4. In turbidity measurements, AADAAC-(FPGVG)4 revealed strong self-assembling ability in the presence of metal ions such as Cd2+ and Zn2+. The results from colorimetric analysis indicated that AADAAC-(FPGVG)4 could capture Cd2+ and Zn2+. Furthermore, AADAAC-(FPGVG)4 that bound to metal ions could be readily recycled by treatment with acidic solution without compromising its metal binding affinity. The present study indicates that the fusion of the metal-binding sequence and ELP is a useful and powerful strategy to develop cost-effective heavy metal scavenging agents with low environmental impacts.

Simple Regulation of the Self-Assembling Ability by Multimerization of Elastin-Derived Peptide (FPGVG) n Using Nitrilotriacetic Acid as a Building Block.

Elastin comprises hydrophobic repetitive sequences, such as Val-Pro-Gly-Val-Gly, which are thought to be important for the temperature-dependent reversible self-association (coacervation). Elastin and elastin-like peptides (ELPs), owing to their characteristics, are expected to be applied as base materials for the development of new molecular tools, such as drug-delivery system carrier and metal-scavenging agents. Recently, several studies have been reported on the dendritic or branching ELP analogues. Although the topological difference of the branched ELPs compared to their linear counterparts may lead to useful properties in biomaterials, the available information regarding the effect of branching on molecular architecture and thermoresponsive behavior of ELPs is scarce. To obtain further insight into the thermoresponsive behavior of branched ELPs, novel ELPs, such as nitrilotriacetic acid (NTA)-(FPGVG) n conjugates, that is, (NTA)-Fn analogues possessing 1-3 (FPGVG) n (n = 3, 5) molecule(s), were synthesized and investigated for their coacervation ability. Turbidity measurement of the synthesized peptide analogues revealed that (NTA)-Fn analogues showed strong coacervation ability with various strengths. The transition temperature of NTA-Fn analogues exponentially decreased with increasing number of residues. In the circular dichroism measurements, trimerization did not alter the secondary structure of each peptide chain of the NTA-Fn analogue. In addition, it was also revealed that the NTA-Fn analogue possesses one peptide chain that could be utilized as metal-scavenging agents. The study findings indicated that multimerization of short ELPs via NTA is a useful and powerful strategy to obtain thermoresponsive molecules.

Enhancement of Self-Aggregation Properties of Linear Elastin-Derived Short Peptides by Simple Cyclization: Strong Self-Aggregation Properties of Cyclo[FPGVG] n, Consisting Only of Natural Amino Acids.

Elastin-like peptides (ELPs) consist of distinctive repetitive sequences, such as (VPGVG) n, exhibit temperature-dependent reversible self-assembly (coacervation), and have been considered to be useful for the development of thermoresponsive materials. Further fundamental studies evaluating coacervative properties of novel nonlinear ELPs could present design concepts for new thermoresponsive materials. In this study, we prepared novel ELPs, cyclic (FPGVG) n (cyclo[FPGVG] n, n = 1-5), and analyzed their self-assembly properties and structural characteristics. Cyclo[FPGVG] n ( n = 3-5) demonstrated stronger coacervation capacity than the corresponding linear peptides. The coacervate of cyclo[FPGVG]5 was able to retain water-soluble dye molecules at 40 °C, which implied that cyclo[FPGVG]5 could be employed as a base material of DDS (drug delivery system) matrices and other biomaterials. The results of molecular dynamics simulations and circular dichroism measurements suggested that a certain chain length was required for cyclo[FPGVG] n to demonstrate alterations in molecular structure that were critical to the exhibition of coacervation.

Stepwise Mechanism of Temperature-Dependent Coacervation of the Elastin-like Peptide Analogue Dimer, (C(WPGVG)3)2.

Elastin-like peptides (ELPs) are distinct, repetitive, hydrophobic sequences, such as (VPGVG) n, that exhibit coacervation, the property of reversible, temperature-dependent self-association and dissociation. ELPs can be found in elastin and have been developed as new scaffold biomaterials. However, the detailed relationship between their amino acid sequences and coacervation properties remains obscure because of the structural flexibility of ELPs. In this study, we synthesized a novel, dimeric ELP analogue (H-C(WPGVG)3-NH2)2, henceforth abbreviated (CW3)2, and analyzed its self-assembly properties and structural factors as indicators of coacervation. Turbidity measurements showed that (CW3)2 demonstrated coacervation at a concentration much lower than that of its monomeric form and another ELP. In addition, the coacervate held water-soluble dye molecules. Thus, potent and distinct coacervation was obtained with a remarkably short sequence of (CW3)2. Furthermore, fluorescence microscopy, dynamic light scattering, and optical microscopy revealed that the coacervation of (CW3)2 was a stepwise process. The structural factors of (CW3)2 were analyzed by molecular dynamics simulations and circular dichroism spectroscopy. These measurements indicated that helical structures primarily consisting of proline and glycine became more disordered at high temperatures with concurrent, significant exposure of their hydrophobic surfaces. This extreme change in the hydrophobic surface contributes to the potent coacervation observed for (CW3)2. These results provide important insights into more efficient applications of ELPs and their analogues, as well as the coacervation mechanisms of ELP and elastin.

Investigation of water-soluble elastin as a multifunctional cosmetic material: Moisturizing and whitening effects.

Elastin and collagen are extracellular matrix proteins that are widely distributed in the body. Although elastin essentially functions as a skin moisturizer, there have been few reports on its other fundamental chemical and biological functions. In this study, we investigated the moisturizing and whitening (tyrosinase inhibition) effects of elastin to examine its usefulness as a cosmetic material. Water-soluble hot alkali pig aorta (HAPA)-elastin was prepared from pig aorta using the hot alkali method. HAPA-elastin showed a widely distributed molecular weight and had a coacervation property that mediated reversible self-assembly of its molecules with increasing temperature. Amino acid analysis of HAPA-elastin showed a high content (81.5%) of hydrophobic amino acids such as Gly, Ala, Val, and Pro. Des (desmosine) and Ide (isodesmosine), which are characteristic amino acids of elastin, accounted for more than 0.4% of the total amino acid content. HAPA-elastin showed a moisture-retaining property. The water content of skin samples treated with and without HAPA-elastin was 77.2% ± 7.8% and 49.4% ± 10.1%, respectively. HAPA-elastin also inhibited tyrosinase activity by 11.3% ± 3.9%. The results obtained indicate that elastin has a useful function as a cosmetic material.

Structural basis of cucumisin protease activity regulation by its propeptide.

Cucumisin [EC 3.4.21.25], a subtilisin-like serine endopeptidase, was isolated from melon fruit, Cucumis melo L. Mature cucumisin (67 kDa, 621 residues) is produced by removal of the propeptide (10 kDa, 88 residues) from the cucumisin precursor by subsequence processing. It is reported that cucumisin is inhibited by its own propeptide. The crystal structure of mature cucumisin is reported to be composed of three domains: the subtilisin-like catalytic domain, the protease-associated domain and the C-terminal fibronectin-III-like domain. In this study, the crystal structure of the mature cucumisin•propeptide complex was determined by the molecular replacement method and refined at 1.95 Å resolution. In this complex, the propeptide had a domain of the α-ß sandwich motif with four-stranded antiparallel ß-sheets, two helices and a strand of the C-terminal region. The ß-sheets of the propeptide bind to two parallel surface helices of cucumisin through hydrophobic interaction and 27 hydrogen bonds. The C-terminus of the propeptide binds to the cleft of the active site as peptide substrates. The inhibitory assay suggested that the C-terminal seven residues of the propeptide do not inhibit the cucumisin activity. The crystal structure of the cucumisin•propeptide complex revealed the regulation mechanism of cucumisin activity.

Dimerization effects on coacervation property of an elastin-derived synthetic peptide (FPGVG)5.

Elastin, a core protein of the elastic fibers, exhibits the coacervation (temperature-dependent reversible association/dissociation) under physiological conditions. Because of this characteristic, elastin and elastin-derived peptides have been considered to be useful as base materials for developing various biomedical products, skin substitutes, synthetic vascular grafts, and drug delivery systems. Although elastin-derived polypeptide (Val-Pro-Gly-Val-Gly)n also has been known to demonstrate coacervation property, a sufficiently high (VPGVG)n repetition number (n>40) is required for coacervation. In the present study, a series of elastin-derived peptide (Phe-Pro-Gly-Val-Gly)5 dimers possessing high coacervation potential were newly developed. These novel dimeric peptides exhibited coacervation at significantly lower concentrations and temperatures than the commonly used elastin-derived peptide analogs; this result suggests that the coacervation ability of the peptides is enhanced by dimerization. Circular dichroism (CD) measurements indicate that the dimers undergo similar temperature-dependent and reversible conformational changes when coacervation occurs. The molecular dynamics calculation results reveal that the sheet-turn-sheet motif involving a type II ß-turn-like structure commonly observed among the dimers and caused formation of globular conformation of them. These synthesized peptide dimers may be useful not only as model peptides for structural analysis of elastin and elastin-derived peptides, but also as base materials for developing various temperature-sensitive biomedical and industrial products.

Development of short and highly potent self-assembling elastin-derived pentapeptide repeats containing aromatic amino acid residues.

Tropoelastin is the primary component of elastin, which forms the elastic fibers that make up connective tissues. The hydrophobic domains of tropoelastin are thought to mediate the self-assembly of elastin into fibers, and the temperature-mediated self-assembly (coacervation) of one such repetitive peptide sequence (VPGVG) has been utilized in various bio-applications. To elucidate a mechanism for coacervation activity enhancement and to develop more potent coacervatable elastin-derived peptides, we synthesized two series of peptide analogs containing an aromatic amino acid, Trp or Tyr, in addition to Phe-containing analogs and tested their functional characteristics. Thus, position 1 of the hydrophobic pentapeptide repeat of elastin (X(1)P(2)G(3)V(4)G(5)) was substituted by Trp or Tyr. Eventually, we acquired a novel, short Trp-containing elastin-derived peptide analog (WPGVG)3 with potent coacervation ability. From the results obtained during this process, we determined the importance of aromaticity and hydrophobicity for the coacervation potency of elastin-derived peptide analogs. Generally, however, the production of long-chain synthetic polypeptides in quantities sufficient for commercial use remain cost-prohibitive. Therefore, the identification of (WPGVG)3, which is a 15-mer short peptide consisting simply of five natural amino acids and shows temperature-dependent self-assembly activity, might serve as a foundation for the development of various kinds of biomaterials.

Design of Phenylalanine-Containing Elastin-Derived Peptides Exhibiting Highly Potent Self-Assembling Capability.

In this study, we developed a series of Phe-containing elastin-derived peptide-analogs, (Phe-Pro-Gly-Val-Gly)n (n = 1-5) and analyzed their reversible coacervation properties. Compared to the native elastin-derived repeating peptide sequence ((Val-Pro-Gly-Val-Gly)10), one of the Phecontaining 5-mer repeating peptide sequences ((Phe-Pro-Gly-Val-Gly)5) clearly exhibited stronger coacervation properties. The coacervation of (Phe-Pro-Gly-Val-Gly)5 is nearly the same as that of polypeptides (Val-Pro-Gly-Val-Gly)n (n > 40). Although large molecular weights (>10,000 Da) are generally required for the coacervation of elastin-derived peptides, (Phe-Pro-Gly-Val-Gly)5 exhibited reversible coacervation properties despite its low molecular weight (MW = 2,305 Da). High performance liquid chromatography (HPLC) and circular dichroism (CD) analysis revealed that (Phe-Pro-Gly-Val-Gly)5 has high hydrophobicity and an ordered structure with a type II ß-turn, which contributes to the strong coacervation ability of the peptide. In addition, (Phe-Pro-Gly-Val-Gly)5 exhibited an effective particle size distribution (60-70 nm) at body temperature (37°C) and a dispersed small particle size similar to that of the monomer peptides at low temperatures. These properties, along with its small size and simple design, render the peptide suitable for use in biomaterials, including drug-delivery carriers.

Comparison between coacervation property and secondary structure of synthetic peptides, Ile-containing elastin-derived pentapeptide repeats.

A series of Ile-containing elastin-derived peptide-analogs, (Ile-Pro-Gly-Val-Gly)n (n = 7-10) possessing remarkable and reversible coacervation property were newly synthesized. In comparison with the known elastin-derived peptide-analogs, which were so-called polypeptides, the obtained 35 to 50 mer peptides, (IPGVG)n (n = 7-10) were significantly low molecular sized-polypeptides. However, they clearly exhibited coacervation property as same as the polypeptides did. Because of their low molecular size, spectrographic analyses of (IPGVG)n (n = 7-10) became feasible to carry out. As results of secondary structural analyses by CD and FT-IR, it was found that the coacervation property of the peptides is clearly attributed to the ordered secondary-structures, mainly, type II ß-turn.

Structural requirements essential for elastin coacervation: favorable spatial arrangements of valine ridges on the three-dimensional structure of elastin-derived polypeptide (VPGVG)n.

The elastin precursor tropoelastin possesses a number of polymeric peptides with repeating 3-9 mer sequences. One of these is the pentapeptide Val-Pro-Gly-Val-Gly (VPGVG) present in almost all animal species, and its polymer (VPGVG)n coacervates just as does tropoelastin. In the present study, in order to explore the structural requirements essential for coacervation, (VPGVG)n and its shortened repeat analogs (VPGV)n, (VPG)n, and (PGVG)n were synthesized and their structural properties were investigated. In our turbidity measurements, (VPGVG)n demonstrated complete reversible coacervation in agreement with previous findings. The Gly(5) -deleted polymer (VPGV)n also achieved self-association, though the onset of self-association occurred at a lower temperature. However, the dissociation of (VPGV)n upon temperature lowering was found to occur in a three-step process; the Val(i) (4) -Val(i+1) (1) structure arising in the VPGV polypeptide appeared to perturb the dissociation. No self-association was observed for (VPG)n or (PGVG)n repeats. Spectroscopic measurements by CD, FT-IR, and (1) H-NMR showed that the (VPGV)n and (VPG)n both assumed ordered structures similar to that of (VPGVG)n. These results demonstrated that VPGVG is a structural element essential to achieving the ß-spiral structure required for self-association followed by coacervation, probably due to the ideal spatial arrangement of the hydrophobic Val residues.

Elastin peptides prepared from piscine and mammalian elastic tissues inhibit collagen-induced platelet aggregation and stimulate migration and proliferation of human skin fibroblasts.

We obtained pure elastin peptides from bovine ligamentum nuchae, porcine aorta, and bonito bulbus arteriosus. The inhibitory activity of these elastin peptides on platelet aggregation induced by collagen and the migratory and proliferative responsivenesses of human skin fibroblasts to these elastin peptides were examined. All of bonito, bovine, and porcine elastin peptides found to inhibit platelet aggregation, but bonito elastin peptides showed a higher inhibitory activity than bovine and porcine elastin peptides did. All elastin peptides enhanced the proliferation of fibroblasts 3.5- to 4.5-fold at a concentration of 10 µg/ml. Bovine and porcine elastin peptides stimulated the migration of fibroblasts, with the optimal response occurring at 10(-1) µg/ml, while maximal response was at 10(2) µg/ml for bonito elastin peptides. Furthermore, pretreatment of fibroblasts by lactose depressed their ability to migrate in response to all elastin peptides, suggesting the involvement of elastin receptor in cell response. These results suggest that both mammalian and piscine elastin peptides can be applied as useful biomaterials in which elasticity, antithrombotic property, and the enhancement of cell migration and proliferation are required.

Involvement of fibronectin and matrix metalloproteinases in airway smooth muscle cell migration for the process of airway remodeling.

BACKGROUND: Airway remodeling is a repair process occurring after airway injury; its primary histopathological features are subepithelial fibrosis and smooth muscle thickening of the bronchi. These histopathological changes are considered to occur due to bronchial smooth muscle cells (bSMC) that secrete extracellular matrix (ECM) proteins, which work as chemoattractants and influence cell migration. Therefore, we examined the interaction between bSMCs and ECM proteins in vitro for understanding the remodeling process in the bronchi. METHODS: bSMCs were cultured to collect a bSMC-conditioned medium. Using the bSMC-conditioned medium thus obtained, we performed a cell migration assay, characterized beta integrin expression, and identified ECM proteins and matrix metalloproteinases by western blotting and gelatin zymography, respectively. RESULTS: The response of bSMC migration to bSMC-conditioned medium increased with time in culture, and fibronectin (FIB) was detected as a chemoattractant for bSMCs in bSMC-conditioned medium by western blot analysis and a cell migration assay using anti-FIB antibodies. The involvement of beta1 integrin in the migration of bSMCs toward FIB contained in bSMC-conditioned medium was demonstrated by inhibition of cell migration using anti-beta1 integrin antibodies. Expression of beta1 integrin on bSMCs was confirmed by using a beta-integrin-mediated cell adhesion array. In addition, metalloproteinases detected in bSMC-conditioned medium by gelatin zymography were suggested to be matrix metalloproteinase-1 and 2 by western blotting and amino acid sequencing. CONCLUSIONS: Our results suggest that FIB and matrix metalloproteinases secreted from bSMCs might play major roles in bSMC migration in the process of airway remodeling.