Syngas Production by Chemical Looping Dry Reforming of Methane over Ni-modified MoO3 /ZrO2.

We investigated supported-MoO3 materials effective for the chemical looping dry reforming of methane (CL-DRM) to decrease the reaction temperature. Ni-modified molybdenum zirconia (Ni/MoO3 /ZrO2 ) showed CL-DRM activity under isothermal reaction conditions of 650 °C, which was 100-200 °C lower than the previously reported oxide-based materials. Ni/MoO3 /ZrO2 activity strongly depends on the MoO3 loading amount. The optimal loading amount was 9.0 wt.% (Ni/MoO3 (9.0)/ZrO2 ), wherein two-dimensional polymolybdate species were dominantly formed. Increasing the loading amount to more than 12.0 wt.% resulted in a loss of activity owing to the formation of bulk Zr(MoO4 )2 and/or MoO3 . In situ Mo K-edge XANES studies revealed that the surface polymolybdate species serve as oxygen storage sites. The Mo6+ species were reduced to Mo4+ species by CH4 to produce CO and H2 . The reduced Mo species reoxidized by CO2 with the concomitant formation of CO. The developed Ni/MoO3 (9.0)/ZrO2 was applied to the long-term CL-DRM under high concentration conditions (20 % CH4 and 20 % CO2 ) at 650 °C, with two pathways possible for converting CH4 and CO2 to CO and H2 via the redox reaction of the Mo species and coke formation.

Accelerated discovery of multi-elemental reverse water-gas shift catalysts using extrapolative machine learning approach.

Designing novel catalysts is key to solving many energy and environmental challenges. Despite the promise that data science approaches, including machine learning (ML), can accelerate the development of catalysts, truly novel catalysts have rarely been discovered through ML approaches because of one of its most common limitations and criticisms-the assumed inability to extrapolate and identify extraordinary materials. Herein, we demonstrate an extrapolative ML approach to develop new multi-elemental reverse water-gas shift catalysts. Using 45 catalysts as the initial data points and performing 44 cycles of the closed loop discovery system (ML prediction + experiment), we experimentally tested a total of 300 catalysts and identified more than 100 catalysts with superior activity compared to those of the previously reported high-performance catalysts. The composition of the optimal catalyst discovered was Pt(3)/Rb(1)-Ba(1)-Mo(0.6)-Nb(0.2)/TiO2. Notably, niobium (Nb) was not included in the original dataset, and the catalyst composition identified was not predictable even by human experts.

Designing main-group catalysts for low-temperature methane combustion by ozone.

The catalytic combustion of methane at a low temperature is becoming increasingly key to controlling unburned CH4 emissions from natural gas vehicles and power plants, although the low activity of benchmark platinum-group-metal catalysts hinders its broad application. Based on automated reaction route mapping, we explore main-group elements catalysts containing Si and Al for low-temperature CH4 combustion with ozone. Computational screening of the active site predicts that strong Brønsted acid sites are promising for methane combustion. We experimentally demonstrate that catalysts containing strong Bronsted acid sites exhibit improved CH4 conversion at 250 °C, correlating with the theoretical predictions. The main-group catalyst (proton-type beta zeolite) delivered a reaction rate that is 442 times higher than that of a benchmark catalyst (5 wt% Pd-loaded Al2O3) at 190 °C and exhibits higher tolerance to steam and SO2. Our strategy demonstrates the rational design of earth-abundant catalysts based on automated reaction route mapping.

An automated reaction route mapping for the reaction of NO and active species on Ag4 clusters in zeolites.

A computational investigation of the catalytic reaction on multinuclear sites is very challenging. Here, using an automated reaction route mapping method, the single-component artificial force induced reaction (SC-AFIR) algorithm, the catalytic reaction of NO and OH/OOH species over the Ag42+ cluster in a zeolite is investigated. The results of the reaction route mapping for H2 + O2 reveal that OH and OOH species are formed over the Ag42+ cluster via an activation barrier lower than that of OH formation from H2O dissociation. Then, reaction route mapping is performed to examine the reactivity of the OH and OOH species with NO molecules over the Ag42+ cluster, resulting in the facile reaction path of HONO formation. With the aid of the automated reaction route mapping, the promotion effect of H2 addition on the SCR reaction was computationally proposed (boosting the formation of OH and OOH species). In addition, the present study emphasizes that automated reaction route mapping is a powerful tool to elucidate the complicated reaction pathway on multi-nuclear clusters.

In- and Ga-oxo clusters/hydrides in zeolites: speciation and catalysis for light-alkane activations/transformations.

Metal-exchanged zeolites have great potential to form unique active metal species and develop their catalysis by promoting small molecules such as light alkanes. Ga-exchanged zeolites have attracted attention as promising heterogeneous catalysts for dehydrogenative light-alkane transformations. The speciation of active Ga species in reduced and oxidized Ga-exchanged zeolites and their reaction mechanisms have been discussed in several studies based on experimental and theoretical investigations. In contrast, studies on In-exchanged zeolites have been far less explored, and thus active In-species have rarely been investigated. In this perspective, we summarized our investigations on In- and Ga-exchanged zeolites for light-alkane transformations. Our research group reported the formation of In-oxo clusters using the O2 treatment of In-CHA and their potential for the partial oxidation of CH4 (POM) at room temperature. We also observed the formation of In-hydrides in CHA zeolites during the preparation through reductive solid-state ion-exchange (RSSIE) and revealed their catalysis for non-oxidative C2H6 dehydrogenation (EDH). Their detailed structures and reaction mechanisms are discussed in combination with spectroscopic, kinetic, and theoretical studies. Furthermore, comparative studies on the formation of Ga-oxo clusters for POM at room temperature and the controlled formation of Ga-hydrides for selective EDH were conducted. The obtained results and insights are comprehensively discussed, including the relationship between the local structure of the active In/Ga species and reaction selectivity, as well as the influence of different zeolite frameworks on the formation of active species.

Continuous CO2 capture and methanation over Ni-Ca/Al2O3 dual functional materials.

Although Ni-Ca-based dual functional materials (DFMs) have been examined for CO2 capture and reduction with H2 (CCR) for the synthesis of CH4, their performance has generally been investigated using single reactors in an oxygen-free environment. In addition, continuous CCR operations have scarcely been investigated. In this study, continuous CCR for the production of CH4 was investigated using a double reactor system over Al2O3-supported Ni-Ca DFMs in the presence of O2. We found that a high Ca loading (Ni(10)-Ca(30)/Al2O3, 10 wt% Ni, and 30 wt% CaO) was necessary for reaction efficiency under isothermal conditions at 450 °C. The optimized DFM exhibited an excellent performance (46% CO2 conversion, 45% CH4 yield, and 97% CH4 selectivity, respectively) and good stability over 24 h. The structure and CCR activity of Ni(10)-Ca(30)/Al2O3 were studied using X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectrometry (EDS), temperature-programmed desorption (TPD), and temperature-programmed surface reaction (TPSR) techniques.

Dimethylacetamide-stabilized ruthenium nanoparticles for catalysing α-alkylations of amides with alcohols.

α-Alkylation reactions between amides and alcohols, with dimethylacetamide-stabilized Ru nanoparticles (NPs) as the catalyst, were investigated. The reactions proceeded with low catalyst loadings compared to metal complexes. Characterizations of the Ru NPs were performed by X-ray photoelectron spectroscopy, X-ray absorption fine structure spectroscopy, and various techniques. Control experiments revealed the reaction mechanisms, which proceeded via hydrogen autotransfer with alcohols.

Local structure and NO adsorption/desorption property of Pd2+ cations at different paired Al sites in CHA zeolite.

Recently, Pd-exchanged CHA zeolites (Pd-CHA) have attracted attention as promising passive NOx adsorbers (PNAs) for reducing NOx emissions during the cold start period of a vehicle engine. In this work, the relationship between the local structures and the NO adsorption/desorption properties of the Pd cations in CHA zeolites was investigated. Pd cation formation and NO adsorption were theoretically explored by density functional theory (DFT) calculations for different paired Al sites in six-/eight-membered rings (6MR/8MR). Furthermore, we prepared a series of Pd-CHAs with different Pd loadings (0.5-5.4 wt%) and evaluated their NO adsorption/desorption properties by in situ infrared (IR) spectroscopy and temperature-programmed desorption (TPD) measurements. The increase in the Pd loading resulted in a shift in the NO desorption temperature toward a higher temperature regime. This phenomenon was ascribed to the increase in the proportion of less stable Pd cations, resulting in improved NO adsorption. Furthermore, the effect of Al distribution on the NO adsorption property of Pd-CHA was examined using CHA zeolites containing different proportions of paired Al sites in 6MR while maintaining similar Si/Al ratios (Si/Al = 12.0-16.5). The present study, based on a combination of theoretical and experimental techniques, shows that the NO adsorption/desorption properties over Pd-CHA can be tuned by controlling the Pd loading amount and the type of paired Al sites.

Transformation of Bulk Pd to Pd Cations in Small-Pore CHA Zeolites Facilitated by NO.

Atomic dispersion of metal species has attracted attention as a unique phenomenon that affects adsorption properties and catalytic activities and that can be used to design so-called single atom materials. In this work, we describe atomic dispersion of bulk Pd into small pores of CHA zeolites. Under 4% NO flow at 600 °C, bulk Pd metal on the outside of CHA zeolites effectively disperses, affording Pd2+ cations on Al sites with concomitant formation of N2O, as revealed by microscopic and spectroscopic characterizations combined with mass spectroscopy. In the present method, even commercially available submicrosized Pd black can be used as a Pd source, and importantly, 4.1 wt % of atomic Pd2+ cations, which is the highest loading amount reported so far, can be introduced into CHA zeolites. The structural evolution of bulk Pd metal is also investigated by in situ X-ray absorption spectroscopy (XAS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), as well as ab initio thermodynamic analysis using density functional theory (DFT) calculations.

Surface activation by electron scavenger metal nanorod adsorption on TiH2, TiC, TiN, and Ti2O3.

Metal/oxide support perimeter sites are known to provide unique properties because the nearby metal changes the local environment on the support surface. In particular, the electron scavenger effect reduces the energy necessary for surface anion desorption, and thereby contributes to activation of the (reverse) Mars-van Krevelen mechanism. This study investigated the possibility of such activation in hydrides, carbides, nitrides, and sulfides. The work functions (WFs) of known hydrides, carbides, nitrides, oxides, and sulfides with group 3, 4, or 5 cations (Sc, Y, La, Ti, Zr, Hf, V, Nb, and Ta) were calculated. The WFs of most hydrides, carbides, and nitrides are smaller than the WF of Ag, implying that the electron scavenger effect may occur when late transition metal nanoparticles are adsorbed on the surface. The WF of oxides and sulfides decreases when reduced. The surface anion vacancy formation energy correlates well with the bulk formation energy in carbides and nitrides, while almost no correlation is found in hydrides because of the small range of surface hydrogen vacancy formation energy values. The electron scavenger effect is explicitly observed in nanorods adsorbed on TiH2 and Ti2O3; the surface vacancy formation energy decreases at anion sites near the nanorod, and charge transfer to the nanorod happens when an anion is removed at such sites. Activation of hydrides, carbides, and nitrides by nanorod adsorption and screening support materials through WF calculation are expected to open up a new category of supported catalysts.

Isolated Indium Hydrides in CHA Zeolites: Speciation and Catalysis for Nonoxidative Dehydrogenation of Ethane.

The study of the formation, characterization, and functionality of isolated surface hydrides on solid materials is a formidable task because of the complexity of solid surfaces and the difficulty of analyzing structures in solids. Herein, we found the formation of indium (In) hydride species supported by CHA zeolites. The In hydrides were formed by treatment of an In-exchanged CHA zeolite (In-CHA) with H2 at high temperatures (>773 K). In situ Fourier transform infrared (FTIR) spectroscopy and density functional theory (DFT) calculations revealed that an [InH2]+ ion on a framework anionic site is a plausible structure. In-CHA exhibited high selectivity and durable catalytic activity for the nonoxidative dehydrogenation of ethane for at least 90 h. Kinetic and in situ spectroscopic studies as well as transition state (TS) calculations suggested that [InH2]+ ions serve as catalytically active sites for selective dehydrogenation using In-CHA.

Experimental and theoretical study of multinuclear indium-oxo clusters in CHA zeolite for CH4 activation at room temperature.

We have carried out an experimental and theoretical study of CHA-zeolite supported indium (In)-oxo clusters that promote CH4 activation at room temperature. X-ray absorption fine structure (XAFS) measurements indicate the formation of multinuclear In-oxo clusters by the O2 activation of the In(i)-exchanged CHA zeolite prepared through reductive solid-state ion exchange (RSSIE). The structure of the In-oxo clusters and their locations were investigated in detail using ab initio thermodynamic analysis. The redox properties of the In species during RSSIE and the formation of the In-oxo clusters were also studied by temperature programmed reaction and in situ XAFS measurements. The reaction of CH4 on the O2-activated In-CHA zeolite was monitored using IR spectroscopy where adsorbed formic acid was generated at room temperature. The adsorption and C-H activation of CH4 on our plausible model of the In-oxo clusters were theoretically investigated using density functional theory calculations. We found that CH4 is likely to adsorb and react more easily on dinuclear In-oxo ions than on monomeric In-oxo ions and that the C-H bond cleavage reaction occurs via a heterolytic pathway rather than a homolytic pathway. This study reveals the potential of multinuclear In-oxo clusters as active sites for the transformation of CH4 to oxygenates under mild reaction conditions.

Direct Phenolysis Reactions of Unactivated Amides into Phenolic Esters Promoted by a Heterogeneous CeO2 Catalyst.

The direct catalytic esterification of amides that leads to the construction of C-O bonds through the cleavage of amide C-N bonds is a highly attractive strategy in organic synthesis. While aliphatic and aromatic alcohols can be readily used for the alcoholysis of activated and unactivated amides, the introduction of phenols is more challenging due to their lower nucleophilicity in the phenolysis of unactivated amides. Herein, we demonstrate that phenols can be used for the phenolysis of unactivated amides into the corresponding phenolic esters using a simple heterogenous catalytic system based on CeO2 under additive-free reaction conditions. The method tolerates a broad variety of functional groups (>50 examples) in the substrates. Results of kinetic studies afforded mechanistic insights into the principles governing this reaction, suggesting that the cooperative effects of the acid-base functions of catalysts would be of paramount importance for the efficient progression of the C-N bond breaking process, and consequently, CeO2 showed the best catalytic performance among the catalysts explored.

Selective Transformations of Triglycerides into Fatty Amines, Amides, and Nitriles by using Heterogeneous Catalysis.

The use of triglycerides as an important class of biomass is an effective strategy to realize a more sustainable society. Herein, three heterogeneous catalytic methods are reported for the selective one-pot transformation of triglycerides into value-added chemicals: i) the reductive amination of triglycerides into fatty amines with aqueous NH3 under H2 promoted by ZrO2 -supported Pt clusters; ii) the amidation of triglycerides under gaseous NH3 catalyzed by high-silica H-beta (Hß) zeolite at 180 °C; iii) the Hß-promoted synthesis of nitriles from triglycerides and gaseous NH3 at 220 °C. These methods are widely applicable to the transformation of various triglycerides (C4 -C18 skeletons) into the corresponding amines, amides, and nitriles.

New Routes for Refinery of Biogenic Platform Chemicals Catalyzed by Cerium Oxide-supported Ruthenium Nanoparticles in Water.

Highly selective hydrogenative carbon-carbon bond scission of biomass-derived platform oxygenates was achieved with a cerium oxide-supported ruthenium nanoparticle catalyst in water. The present catalyst enabled the selective cleavage of carbon-carbon σ bonds adjacent to carboxyl, ester, and hydroxymethyl groups, opening new eight synthetic routes to valuable chemicals from biomass derivatives. The high selectivity for such carbon-carbon bond scission over carbon-oxygen bonds was attributed to the multiple catalytic roles of the Ru nanoparticles assisted by the in situ formed Ce(OH)3.

Mild Hydrogenation of Amides to Amines over a Platinum-Vanadium Bimetallic Catalyst.

Hydrogenation of amides to amines is an important reaction, but the need for high temperatures and H2 pressures is a problem. Catalysts that are effective under mild reaction conditions, that is, lower than 30 bar H2 and 70 °C, have not yet been reported. Here, the mild hydrogenation of amides was achieved for the first time by using a Pt-V bimetallic catalyst. Amide hydrogenation, at either 1 bar H2 at 70 °C or 5 bar H2 at room temperature was achieved using the bimetallic catalyst. The mild reaction conditions enable highly selective hydrogenation of various amides to the corresponding amines, while inhibiting arene hydrogenation. Catalyst characterization showed that the origin of the catalytic activity for the bimetallic catalyst is the oxophilic V-decorated Pt nanoparticles, which are 2 nm in diameter.

On-demand Hydrogen Production from Organosilanes at Ambient Temperature Using Heterogeneous Gold Catalysts.

An environmentally friendly ("green"), H2-generation system was developed that involved hydrolytic oxidation of inexpensive organosilanes as hydrogen storage materials with newly developed heterogeneous gold nanoparticle catalysts. The gold catalyst functioned well at ambient temperature under aerobic conditions, providing efficient production of pure H2. The newly developed size-selective gold nanoparticle catalysts could be separated easily from the reaction mixture containing organosilanes, allowing an on/off-switchable H2-production by the introduction and removal of the catalyst. This is the first report of an on/off-switchable H2-production system employing hydrolytic oxidation of inexpensive organosilanes without requiring additional energy.

Green, Multi-Gram One-Step Synthesis of Core-Shell Nanocomposites in Water and Their Catalytic Application to Chemoselective Hydrogenations.

We devise a new and green route for the multi-gram synthesis of core-shell nanoparticles (NPs) in one step under organic-free and pH-neutral conditions. Simply mixing core and shell metal precursors in the presence of solid metal oxides in water allowed for the facile fabrication of small CeO2 -covered Au and Ag nanoparticles dispersed on metal oxides in one step. The CeO2 -covered Au nanoparticles acted as a highly efficient and reusable catalyst for a series of chemoselective hydrogenations, while retaining C=C bonds in diverse substrates. Consequently, higher environmental compatibility and more efficient energy savings were achieved across the entire process, including catalyst preparation, reaction, separation, and reuse.

One-step Synthesis of Core-Gold/Shell-Ceria Nanomaterial and Its Catalysis for Highly Selective Semihydrogenation of Alkynes.

We report a facile synthesis of new core-Au/shell-CeO2 nanoparticles (Au@CeO2) using a redox-coprecipitation method, where the Au nanoparticles and the nanoporous shell of CeO2 are simultaneously formed in one step. The Au@CeO2 catalyst enables the highly selective semihydrogenation of various alkynes at ambient temperature under additive-free conditions. The core-shell structure plays a crucial role in providing the excellent selectivity for alkenes through the selective dissociation of H2 in a heterolytic manner by maximizing interfacial sites between the core-Au and the shell-CeO2.

Selective C-C coupling reaction of dimethylphenol to tetramethyldiphenoquinone using molecular oxygen catalyzed by Cu complexes immobilized in nanospaces of structurally-ordered materials.

Two high-performance Cu catalysts were successfully developed by immobilization of Cu ions in the nanospaces of poly(propylene imine) (PPI) dendrimer and magadiite for the selective C-C coupling of 2,6-dimethylphenol (DMP) to 3,3',5,5'-tetramethyldiphenoquinone (DPQ) with O2 as a green oxidant. The PPI dendrimer encapsulated Cu ions in the internal nanovoids to form adjacent Cu species, which exhibited significantly high catalytic activity for the regioselective coupling reaction of DMP compared to previously reported enzyme and metal complex catalysts. The magadiite-immobilized Cu complex acted as a selective heterogeneous catalyst for the oxidative C-C coupling of DMP to DPQ. This heterogeneous catalyst was recoverable from the reaction mixture by simple filtration, reusable without loss of efficiency, and applicable to a continuous flow reactor system. Detailed characterization using ultraviolet-visible (UV-vis), Fourier transform infrared (FTIR), electronic spin resonance (ESR), and X-ray absorption fine structure (XAFS) spectroscopies and the reaction mechanism investigation revealed that the high catalytic performances of these Cu catalysts were ascribed to the adjacent Cu species generated within the nanospaces of the PPI dendrimer and magadiite.