Biochars produced from various agro-industrial by-products applied in Cr(VI) adsorption-reduction processes.

This study aimed to reuse different agro-industrial by-products (poultry litter, pig manure, sewage sludge and coffee husk) for biochar production and to evaluate their Cr(VI) removal capacities in aqueous medium. The biochars showed different morphologies with porous structures. The percentages of Cr(VI) removal from solution were higher in acid medium (pH = 2), reaching values up to 87%. For all biochars, Cr(VI) removal occurs via both adsorption and reduction, being a rapid (30 min) process, which fits best to the pseudo-second order kinetic model. The biochars, especially from coffee husk, were able to reduce up to 20% of Cr(VI) to Cr(III). The maximum Cr(VI) removal capacities ranged from 10.86 mg g-1 (sewage sludge biochar) to 18.52 mg g-1 (coffee husk biochar). Therefore, the production of biochars from the agro-industrial by-products using the same experimental conditions in one single study is important to compare the Cr(VI) removal capacities from different biomasses. Thus, this study explored the corresponding raw material without the need of further treatment. Biochars showed potential for environmental applications considering Cr(VI)-polluted environments. It is hoped to provide basis to future studies using real wastewater samples.

Magnetic photocatalysts from δ-FeOOH and TiO2 and application in reactions for degradation of methylene blue and paracetamol with UV-C and sunlight.

Water contamination is a common problem, especially considering dyes and drugs disposal. A possible and effective treatment method to remove these organic pollutants from water is photocatalytic reaction. This study aimed to improve the photocatalytic properties of TiO2 using iron oxides (Ti/Fe composite). Different magnetic photocatalysts based on commercial TiO2 were obtained with 30, 50, and 80% (wt./wt.) of TiO2 supported on maghemite. X-ray diffraction with Rietveld refinement confirms the presence of γ-Fe2O3, α-Fe2O3, anatase, and rutile, as well as the relative percentages of the phases present in each photocatalyst. The magnetic properties were certified by VSM and sedimentation kinetics in the presence of a magnetic field. Besides their magnetic properties, UV-vis DRS shows that the obtained photocatalysts presented lower bandgap values when compared with TiO2. These factors allowed the materials to absorb radiation in the visible-light region and the separation from the reaction medium by the application of magnetic field. It was observed an enhancement of photodegradation reaction of methylene blue (MB) and paracetamol (PC). For example, when the content of TiO2 increased from 30 to 80% (wt./wt.), the efficiency increased from 58 to 99% (for MB) and 39 for 80% (for PC) under UV (λ = 254 nm). The reactions carried out with solar radiation showed 56 to 95% efficiency to discolor MB. In addition, the results of sedimentation kinetics and characterization confirmed the goals of the synthesis.

Use of tar pitch as a binding and reductant of BFD waste to produce reactive materials for environmental applications.

In this work, a new approach is presented for the modification of the hazardous steel industry waste BFD (Blast Furnace Dust) into a versatile material for application in environmental remediation processes. Tar pitch, another waste, was used to agglomerate the very fine (submicrometric) dust particles to produce a compact and robust pelletized material that under simple thermal treatment produces notably reactive reduced Fe phases. SEM, TG/DTA, Mössbauer, XRD, Raman, BET and elemental analyses indicated that the tar/BFD composite (1:1wt ratio) pellets treated at 400, 600 and 800°C lead to tar decomposition to form a carbon binding coat concomitant with the reduction of the Fe oxides to produce primarily Fe3O4 (magnetite), FeO (wüstite) and Fe(0). Preliminary reactivity studies indicated that these treated composites, especially at 800°C, are active for the reduction of Cr(VI)aq and for the elimination of textile dye via reduction and the Fenton reaction.

Controlled reduction of red mud waste to produce active systems for environmental applications: heterogeneous Fenton reaction and reduction of Cr(VI).

In this work, controlled reduction of red mud with H(2) was used to produce active systems for two different environmental applications, i.e. the heterogeneous Fenton reaction and the reduction of Cr(VI). Mössbauer, powder X-ray diffraction, thermal analyses and scanning electron microscopy analyses showed that at different temperatures, i.e. 300, 400, 500 and 600 degrees C, H(2) reduces red mud to different phases, mainly Fe(3)O(4), Fe(0)/Fe(3)O(4) and Fe(0). These Fe phases are dispersed on Al, Si and Ti oxides present in the red mud and show high reactivity towards two environmental applications, i.e. the heterogeneous Fenton reaction and the reduction of Cr(VI). Reduction with H(2) at 400 degrees C showed the best results for the oxidation of the model dye methylene blue with H(2)O(2) at neutral pH due to the presence of the composite Fe(0)/Fe(3)O(4). The reduced red mud at 500-600 degrees C produced Fe(0) highly active for the reduction of Cr(VI) in aqueous medium. Another feature of these red mud based system is that after deactivation due to extensive use they can be completely regenerated by simple treatment with H(2).