Controlling the Formation of Polyelectrolyte Complex Nanoparticles Using Programmable pH Reactions.

Enabling complexation of weak polyelectrolytes, in the presence of a programmable pH-modulation, offers a means to achieve temporal control over polyelectrolyte coassembly. Here, by mixing oppositely charged poly(allylamine hydrochloride) and poly(sodium methacrylate) in a (bi)sulfite buffer, nanoscopic complex coacervates are formed. Addition of formaldehyde initiates the formaldehyde-sulfite clock reaction, affecting the polyelectrolyte assembly in two ways. First, the abrupt pH increase from the reaction changes the charge density of the polyelectrolytes and thus the ratio of cationic and anionic species. Simultaneously, reactions between the polyamine and formaldehyde lead to chemical modifications on the polymer. Interestingly, core-shell polymeric nanoparticles are produced, which remain colloidally stable for months. Contrastingly, in the same system, in the absence of the clock reaction, aggregation and phase separation occur within minutes to days after mixing. Introducing an acid-producing reaction enables further temporal control over the coassembly, generating transient nanoparticles with nanoscopic dimensions and an adjustable lifetime of tens of minutes.

Chromonic nematic liquid crystals in a room-temperature ionic liquid.

Planar multiaromatic molecules hierarchically and selectively arrange into nematic chromonic liquid crystals in the room temperature ionic liquid 2-hydroxyethylammonium formate. In a proof of concept, these liquid crystals were used as reaction media to produce mesostructured silica materials under mild biomimetic conditions. Several other applications are envisaged.

Complex supramolecular fiber formed by coordination-induced self-assembly of benzene-1,3,5-tricarboxamide (BTA).

HYPOTHESIS: In the quest for large but well-controlled supramolecular structures, the discotic benzene-1,3,5-tricarboxamide (BTA) has received quite some attention, because it can form hydrogen-bonded stacks that can be regarded as supramolecular polymers of which the single BTA molecule is the monomer. In this report, we consider a more complex BTA-based supramolecular polymer, namely one that is built up from supramolecular 'monomers'. EXPERIMENTS: We design a tris-ligand L3 consisting of a BTA core carrying three dipicolinic acid (DPA) groups. L3 itself is too small to form polymers, but in the presence of appropriate metal ions, each L3 can form three coordination bonds and so form (L3)n clusters that are large enough to stack successfully: at an appropriate metal dose, long and stable filaments with a cross-sectional diameter of 12 nm appear. We monitor the growth process by UV-vis spectroscopy and light scattering, and use small angle X-ray scattering (SAXS), TEM as well as molecular simulation to confirm the filamentous structure of the fibers and determine their dimensions. FINDINGS: The formation and structure of the fiber are very similar for various transition metal ions, which enables introducing different functionalities, e.g., magnetic relaxivity, by proper choice of the metal ions. Hence, we obtain a doubly supramolecular polymer, connected axially by hydrogen bonds, and radially by coordination bonds. Not only does this realize a higher level of complexity, but it also allows to easily introduce and vary metal-derived functionalities.

Co-assembly of precision polyurethane ionomers reveals role of and interplay between individual components.

Industrial and household products, such as paints, inks and cosmetics usually consist of mixtures of macromolecules that are disperse in composition, in size and in monomer sequence. Identifying structure-function relationships for these systems is complicated, as particular macromolecular components cannot be investigated individually. For this study, we have addressed this issue, and have synthesized a series of five sequence-defined polyurethanes (PUs): one neutral-hydrophobic, one single-charged hydrophilic, one single-charged hydrophobic and two double-charged amphiphilic PUs (one symmetric and one asymmetric). These novel precision PUs - that were prepared by using stepwise coupling-deprotection synthetic protocols - have a defined composition, size and monomer sequence, where the chosen sequences were inspired by those that are abundantly formed in the production of industrial waterborne PU dispersions. By performing dynamic light scattering experiments (DLS), self-consistent field (SCF) computations and cryogenic transmission electron microscopy (cryo-TEM), we have elucidated the behavior in aqueous solution of the individual precision PUs, as well as of binary and ternary mixtures of the PU sequences. The double-charged PU sequences ('hosts') were sufficiently amphiphilic to yield single-component micellar solutions, whereas the two more hydrophobic sequences did not micellize on their own, and gave precipitates or ill-defined larger aggregates. Both the neutral-hydrophobic PU and the hydrophilic single-charged PU were successfully incorporated in the host micelles as guests, respectively increasing and reducing the micelle radius upon incorporation. SCF computations indicated that double-charged symmetric PUs stretch whilst double-charged asymmetric PUs are expelled from the core to accommodate hydrophobic PU guests within the micelles. For the ternary mixture of the double-charged symmetric and asymmetric hosts and the neutral-hydrophobic guest we have found an improved colloidal stability, as compared to those for binary mixtures of either host and hydrophobic guest. In another ternary mixture of precision PUs, with all three components not capable of forming micelles on their own, we see that the ensemble of molecules produces stable micellar solutions. Taken together, we find that the interplay between PU-molecules in aqueous dispersions promotes the formation of stable micellar hydrocolloids.

Micellization of Sequence-Controlled Polyurethane Ionomers in Mixed Aqueous Solvents.

While the impact of compositional parameters such as block length and ionic content on the micellization of (polymeric) amphiphiles is widely investigated, the influence of monomer sequence has received far less attention until recently. Here, we report the synthesis of two sequence-controlled polyurethane ionomers (PUIs) prepared via a stepwise coupling-deprotection strategy, and compare their solution association in aqueous-organic mixtures. The two PUIs are highly similar in mass and overall composition, yet differ markedly in the sequence of building blocks. PUI-A2 comprises a polytetrahydrofuran (pTHF) block connected to an alternation of isophorone diamine (IPDA) and dimethylolpropionic acid (DMPA) units that together are also arranged in a blockwise manner. The result is a macromolecular structure with a comparatively hydrophobic tail (pTHF) and a hydrophilic headgroup, which structure is reminiscent of those of traditional surfactants, albeit much larger in size. PUI-S2 instead resembles a bolaamphiphilic architecture with a pTHF midblock connected on either end to a singly charged segment comprising DMPA and IPDA. We detect micellization below a threshold cosolvent volume fraction (φsolv) of 0.4 in aqueous-organic mixtures with tetrahydrofuran (THF), ethanol, and isopropyl alcohol. We use scattering tools to compare the aggregation number (N agg) and hydrodynamic radius (R h) of PUI-S2 and PUI-A2 micelles. Irrespective of the solvent composition, we observe in the micellar window of φsolv < 0.4, lower N agg for PUI-S2 micelles compared to PUI-A2, which we attribute to packing restraints associated with its bolaamphiphilic architecture. The increase in micellar size with increasing φsolv is much more pronounced for PUI-S2 than for PUI-A2. The micellar mass decreases with increasing φsolv for both PUIs; the effect is modest for PUI-S2 compared to PUI-A2 and is not observed in the most apolar cosolvent studied (THF). Upon the approach of the micellization boundary φsolv ≈ 0.4, both types of PUI micelles become less compact in structure, as (in most cases) PUIs are released and as micellar dimensions increase.

Fractal-like R5 assembly promote the condensation of silicic acid into silica particles.

HYPOTHESIS: Despite advances in understanding the R5 (SSKKSGSYSGKSGSKRRIL) peptide-driven bio-silica process, there remains significant discrepancies regarding the physicochemical characterization and the self-assembling mechanistic driving forces of the supramolecular R5 template. This paper investigates the self-assembly of R5 as a function of monovalent (sodium chloride) and multivalent salt (phosphate) to determine if assembly is phosphate ion concentration dependent. Additionally, we hypothesize that the assembled R5 aggregates do not resemble a micelle or unimer structure as proposed in current literature. EXPERIMENTS: R5 peptides were synthesized, and aggregates evaluated for their size, morphology, and association state as a function of salt and ionic strength concentration via dynamic and static light scattering, small angle X-ray and neutron scattering and cryogenic transmission electron microscopy. Furthermore, we compare the proposed R5 template to precipitated silica by scanning electron microscopy. FINDINGS: R5 peptides assemble into large aggregates due to multivalence bridging and the decrease in electrostatic repulsion due to ionic strength. We elucidate the structure of R5 aggregates as mass-fractals composed of small spherical aggregates. Moreover, we discover that phosphate ions not only have a significant role in driving the growth of the R5 scaffold, but additionally in driving the polycondensation of silicic acid during the bio-silification process via electrostatic interactions.

On Complex Coacervate Core Micelles: Structure-Function Perspectives.

The co-assembly of ionic-neutral block copolymers with oppositely charged species produces nanometric colloidal complexes, known, among other names, as complex coacervates core micelles (C3Ms). C3Ms are of widespread interest in nanomedicine for controlled delivery and release, whilst research activity into other application areas, such as gelation, catalysis, nanoparticle synthesis, and sensing, is increasing. In this review, we discuss recent studies on the functional roles that C3Ms can fulfil in these and other fields, focusing on emerging structure-function relations and remaining knowledge gaps.

Architecture-Dependent Interplay between Self-Assembly and Crystallization in Discrete Block Co-Oligomers.

Access to versatile and stable nanostructures formed by the self-assembly of block copolymers in water is essential for biomedical applications. These applications require control over the stability, morphology, and size of the formed nanostructures. Here, we study the self-assembly in water of a library of fully discrete and sequence-controlled AB-type block co-oligomers (BCOs) of oligo(l-lactic acid)-b-oligo(ethylene glycol). In this series, we eliminate all the inherent uncertainty associated with molar mass, ratio, and compositional dispersity, but vary the ratio between the water-soluble and water-insoluble parts. The BCO library is designed in such a way that vesicles, spherical micelles, and cylindrical micelles are generated in solution, hereby covering a variety of common morphologies. With the help of self-consistent field (SCF) computations, the thermodynamic structures in water are predicted for all structures. The morphologies formed were experimentally analyzed using a combination of calorimetry and scattering techniques. When comparing the experimentally found structures with those predicted, we find an excellent agreement. Intriguingly, calorimetry showed the presence of crystallized l-lactic acid (LLA) units in the bilayer of the lamellar forming BCO. Despite this crystallinity, there is no mismatch between the predicted and observed bilayer thicknesses upon self-assembly in water. In this case, phase separation driven by the hydrophobic LLA block coincides with crystallization, resulting in stable morphologies. Thus, SCF guided library design and sample preparation can lead toward robust formulations of nanoparticles.

Sequence of Polyurethane Ionomers Determinative for Core Structure of Surfactant-Copolymer Complexes.

The core of micelles self-assembled from amphiphiles is hydrophobic and contains little water, whereas complex coacervate core micelles co-assembled from oppositely charged hydrophilic polymers have a hydrophilic core with a high water content. Co-assembly of ionic surfactants with ionic-neutral copolymers yields surfactant-copolymer complexes known to be capable of solubilizing both hydrophilic and hydrophobic cargo within the mixed core composed of a coacervate phase with polyelectrolyte-decorated surfactant micelles. Here we formed such complexes from asymmetric (PUI-A2) and symmetric (PUI-S2), sequence-controlled polyurethane ionomers and poly(N-methyl-2-vinylpyridinium iodide)29-b-poly(ethylene oxide)204 copolymers. The complexes with PUI-S2 were 1.3-fold larger in mass and 1.8-fold larger in radius of gyration than the PUI-A2 complexes. Small-angle X-ray scattering revealed differences in the packing of the similarly sized PUI micelles within the core of the complexes. The PUI-A2 micelles were arranged in a more ordered fashion and were spaced further apart from each other (10 nm vs. 6 nm) than the PUI-S2 micelles. Hence, this work shows that the monomer sequence of amphiphiles can be varied to alter the internal structure of surfactant-copolymer complexes. Since the structure of the micellar core may affect both the cargo loading and release, our findings suggest that these properties may be tuned through control of the monomer sequence of the micellar constituents.