Microplastics in Kenya's marine nearshore surface waters: Current status.

Microplastics (MPs) were collected at six locations along Kenya's marine nearshore surface waters using a 300 µm mesh-size manta net. The samples were washed over a 125-µm mesh size sieve No.120 into a glass jar and preserved in 70% ethanol. MPs were sorted, counted visually under a dissecting microscope then identified using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. A total of 1473 particles with an overall mean concentration of 0.58 ± 1.29 MPs m-3, were collected. Fragments were the most common types representing 55% of the total MPs, followed by films (40%) and fibers (2%). Polypropylene (PP) was dominant (52%), high-density polyethylene (HDPE) comprised 38% and low density polyethylene (LDPE) 10% of the total MPs. This study provided baseline information, in which Malindi was identified as a hot spot for MPs pollution. Furthermore, the outcomes will assist policy formulations and management strategies aimed at controlling marine plastics.

Polycyclic Aromatic Hydrocarbon Gaseous Emissions from Household Cooking Devices: A Kenyan Case Study.

In developing countries, household energy use is highly variable and complex, yet emissions arising from fuel combustion indoors are typically poorly quantified. Polycyclic aromatic hydrocarbons (PAHs) are emitted during the combustion of organic fuels such as charcoal and biomass. In the present study, multichannel polydimethylsiloxane rubber traps were used for gas-phase PAH sampling and extracted using a low-solvent volume plunger-assisted solvent extraction method. Sixteen US Environmental Protection Agency priority PAHs, primarily in the gas phase, were investigated in indoor air of rural and urban residential homes in coastal Kenya (Mombasa and Taita Taveta Counties) using typical combustion devices of each area. Average gaseous PAH concentrations per household were higher in rural (ranging 0.81-6.09 µg m-3 ) compared to urban (ranging 0-2.59 µg m-3 ) homes, although ambient PAH concentrations were higher in urban environments, likely attributable to traffic contributions. The impact of fuel choice and thereby combustion device on PAH emissions was very clear, with the highest concentrations of PAHs quantified from wood-burning emissions from 3-stone stoves (total PAH averages 46.23 ± 3.24 µg m-3 [n = 6]). Average benzo[a]pyrene equivalent total concentrations were evaluated for the priority PAHs and ranged from not detected to 43.31, 88.38, 309.61, and 453.88 ng m-3 for gas, kerosene, jiko, 3-stone, and improved 3-stone stoves, respectively. Environ Toxicol Chem 2020;39:538-547. © 2019 SETAC.