Precursors to non-invasive clinical dengue screening: Multivariate signature analysis of in-vivo diffuse skin reflectance spectroscopy on febrile patients in Malaysia.

Dengue diagnostics have come a long way. Attempts at breaking away from lab-oriented dengue detection, such as NS1 antigen, IgM or IgG antibodies detection have extensively received numerous coverage. As a result, rapid detection tests (RDTs) have started to gain inroads in medical practice. Rapid detection tests notwithstanding, analysis of blood serum is still a relatively complicated task. This includes the necessity of phlebotomy, centrifugation for blood serum, and other reagent-based tests. Therefore, a non-invasive method of dengue detection was considered. In this study, we present the utility of diffuse reflectance skin spectroscopy (bandwidth of 200-2500nm) on the forearm during the triaging period for dengue screening potential. This is performed with multivariate analysis of 240 triaged febrile/suspected dengue patients. The data is then scrutinized for its clinical validity to be included as either confirmed or probable dengue, or a control group. Based on discriminant analysis of several data normalization models, we can predict the patients' clinical dengue-positivity at ranges of accuracy between ~93-98% depending on mode of the data, with a probably optimal sensitivity and specificity to the clinical diagnosis of ~89% and ~100% respectively. From the outcomes of this study, we recommend further trials with cautious optimism. With these findings, it is hoped that the elusive non-invasive detection of tropical diseases may gain platform in the near future.

Design and fabrication of copper-filled photonic crystal fiber based polarization filters.

This work demonstrates a broadband polarization filter based on copper-filled photonic crystal fiber (CFPCF). The proposed fiber is fabricated using the conventional stack-and-draw method. The polarization filter properties of the proposed CFPCF are investigated numerically by considering the cross-sectional scanning electron microscopy image of the fabricated CFPCF. It is observed that the magnitude of cross talk reached up to -206 dB over 0.8 mm length with a broad bandwidth of 282 nm at a central wavelength of 1790 nm. In addition, the polarization characteristics of the CFPCF including cross talk, central wavelength, and bandwidth can be adjusted by varying the diameter of the copper wire. It is shown that the resonance wavelength of the proposed filter can be tuned over the wide range of wavelengths from 1390 to 1890 nm. We have shown that by adjusting the copper wire diameter to 0.32Λ and 0.48Λ µm (Λ is pitch size), the proposed filter can operate at communication bands of 1310 and 1550 nm, respectively. The results suggest high-potential of the proposed fiber for polarization filtering and other sensing applications.

Optical fiber Bragg grating-instrumented silicone liner for interface pressure measurement within prosthetic sockets of lower-limb amputees.

This paper presents a fiber Bragg grating (FBG)-instrumented prosthetic silicone liner that provides cushioning for the residual limb and can successfully measure interface pressures inside prosthetic sockets of lower-limb amputees in a simple and practical means of sensing. The liner is made of two silicone layers between which 12 FBG sensors were embedded at locations of clinical interest. The sensors were then calibrated using a custom calibration platform that mimics a real-life situation. Afterward, a custom gait simulating machine was built to test the liner performance during an amputee's simulated gait. To validate the findings, the results were compared to those obtained by the commonly used F-socket mats. As the statistical findings reveal, both pressure mapping methods measured the interface pressure in a consistent way, with no significant difference (P-values ≥0.05). This pressure mapping technique in the form of a prosthetic liner will allow prosthetics professionals to quickly and accurately create an overall picture of the interface pressure distribution inside sockets in research and clinical settings, thereby improving the socket fit and amputee's satisfaction.

Effects of low-powered RF sweep between 0.01-20 GHz on female Aedes Aegypti mosquitoes: A collective behaviour analysis.

There are many products claiming to be an electronic solution towards repelling mosquitoes. Several reviews were published in debunking these claims. However, there is a lack of a systematic study on effects of electromagnetic (EM) or more specifically, radio frequency (RF) waves against mosquitoes due to the conclusions made in those years. Therefore, we attempt to establish a fundamental study on female Aedes Aegypti (Linnaeus) mosquitoes by quantifying the collective behavior of the mosquitoes against a continuous stream of low-powered RF signals via a broadband horn antenna using image processing methods. By examining the average lateral and vertical positions of the mosquitoes versus frequency and time, the data shows negligible consistency in the reactions of the mosquitoes toward the different frequencies ranging from 10 to 20,000.00 MHz, with a step of 10 MHz. This was done by examining 33 hours of spatiotemporal data, which was divided into three sessions. All three sessions showed totally different convolutions in the positions in arbitrary units based on the raster scan of the image processing output. Several frequencies apparently showed up to 0.2-70% shift in both lateral and vertical components along the spectrum, without repeatability for all three sessions. This study contributes to the following: A pilot study for establishing the collective effects of RF against mosquitoes, open-source use, and finally a low-cost and easily adaptable platform for the study of EM effects against any insects.

Diamond ring fiber for evanescent field exposure.

Diamond Ring Fiber (DRF) is proposed to allow a high percentage of evanescent field exposure while maintaining low confinement loss. It provides a long and protected medium for light-matter interaction and large cavities to ease the infiltration of sensing elements. DRFs with different waveguide parameters have been analyzed theoretically and fabricated using a stack-and-draw fiber drawing technique. Mode analysis has been performed experimentally on the fabricated fibers, while the confinement loss and the percentage of evanescent field exposure are examined by simulation. DRF allows evanescent field exposure as high as 39.56% with negligible confinement loss at a wavelength of 1550 nm.

Collective behavior quantification on human odor effects against female Aedes aegypti mosquitoes-Open source development.

Classifying and quantifying mosquito activity includes a plethora of categories, ranging from measuring flight speeds, repellency, feeding rates, and specific behaviors such as home entry, swooping and resting, among others. Entomologists have been progressing more toward using machine vision for efficiency for this endeavor. Digital methods have been used to study the behavior of insects in labs, for instance via three-dimensional tracking with specialized cameras to observe the reaction of mosquitoes towards human odor, heat and CO2, although virtually none was reported for several important fields, such as repellency studies which have a significant need for a proper response quantification. However, tracking mosquitoes individually is a challenge and only limited number of specimens can be studied. Although tracking large numbers of individual insects is hailed as one of the characteristics of an ideal automated image-based tracking system especially in 3D, it also is a costly method, often requiring specialized hardware and limited access to the algorithms used for mapping the specimens. The method proposed contributes towards (a) unlimited open source use, (b) a low-cost setup, (c) complete guide for any entomologist to adapt in terms of hardware and software, (d) simple to use, and (e) a lightweight data output for collective behavior analysis of mosquitoes. The setup is demonstrated by testing a simple response of mosquitoes in the presence of human odor versus control, one session with continuous human presence as a stimuli and the other with periodic presence. A group of female Aedes aegypti (Linnaeus) mosquitoes are released into a white-background chamber with a transparent acrylic panel on one side. The video feed of the mosquitoes are processed using filtered contours in a threshold-adjustable video. The mosquitoes in the chamber are mapped on the raster where the coordinates of each mosquito are recorded with the corresponding timestamp. The average distance of the blobs within the frames against time forms a spectra where behavioral patterns can be observed directly, whether any collective effect is observed. With this method, 3D tracking will not be required and a more straightforward data output can be obtained.

Kinetic analysis of IgM monoclonal antibodies for determination of dengue sample concentration using SPR technique.

Surface plasmon resonance (SPR) sensing is recently emerging as a valuable technique for measuring the binding constants, association and dissociation rate constants, and stoichimetry for a binding interaction kinetics in a number of emerging biological areas. This technique can be applied to the study of immune system diseases in order to contribute to improved understanding and evaluation of binding parameters for a variety of interactions between antigens and antibodies biochemically and clinically. Since the binding constants determination of an anti-protein dengue antibody (Ab) to a protein dengue antigen (Ag) is mostly complicated, the SPR technique aids a determination of binding parameters directly for a variety of particular dengue Ag_Ab interactions in the real-time. The study highlights the doctrine of real-time dengue Ag_Ab interaction kinetics as well as to determine the binding parameters that is performed with SPR technique. In addition, this article presents a precise prediction as a reference curve for determination of dengue sample concentration.

Detection of dengue NS1 antigen using long-range surface plasmon waveguides.

The non-structural 1 (NS1) protein of the dengue virus circulates in infected patients' blood samples and can be used for early diagnosis of dengue infection. In this paper, we present the detection of naturally-occurring dengue NS1 antigen in infected patient blood plasma using straight long-range surface plasmon waveguides. Three commercially-available anti-NS1 monoclonal antibodies were used for recognition and their performance was compared and discussed. A similar figure of merit to the one used in conventional dengue NS1 capture using an enzyme-linked immunosorbent assay (ELISA) was applied to our results. In general, the positive patient samples can be clearly differentiated from the negative ones and the results agree with those obtained using ELISA. The largest signal-to-noise ratio observed during the experiments was 356 and the best detection limit observed is estimated as 5.73 pg/mm(2).

Serological diagnosis of dengue infection in blood plasma using long-range surface plasmon waveguides.

We present a compact, cost-effective, label-free, real-time biosensor based on long-range surface plasmon polariton (LRSPP) gold (Au) waveguides for the detection of dengue-specific immunoglobulin M (IgM) antibody, and we demonstrate detection in actual patient blood plasma samples. Two surface functionalization approaches are proposed and demonstrated: a dengue virus serotype 2 (DENV-2) functionalized surface to capture dengue-specific IgM antibody in blood plasma and the reverse, a blood plasma functionalized surface to capture DENV-2. The results obtained via these two surface functionalization approaches are comparable to, or of greater quality, than those collected by conventional IgM antibody capture enzyme linked immunosorbent assay (MAC-ELISA). Our second functionalization approach was found to minimize nonspecific binding, thus improving the sensitivity and accuracy of the test. We also demonstrate reuse of the biosensors by regenerating the sensing surface down to the virus (or antibody) level or down to the bare Au.

The use of fiber Bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics.

In recent years, fiber Bragg gratings (FBGs) are becoming increasingly attractive for sensing applications in biomechanics and rehabilitation engineering due to their advantageous properties like small size, light weight, biocompatibility, chemical inertness, multiplexing capability and immunity to electromagnetic interference (EMI). They also offer a high-performance alternative to conventional technologies, either for measuring a variety of physical parameters or for performing high-sensitivity biochemical analysis. FBG-based sensors demonstrated their feasibility for specific sensing applications in aeronautic, automotive, civil engineering structure monitoring and undersea oil exploration; however, their use in the field of biomechanics and rehabilitation applications is very recent and its practicality for full-scale implementation has not yet been fully established. They could be used for detecting strain in bones, pressure mapping in orthopaedic joints, stresses in intervertebral discs, chest wall deformation, pressure distribution in Human Machine Interfaces (HMIs), forces induced by tendons and ligaments, angles between body segments during gait, and many others in dental biomechanics. This article aims to provide a comprehensive overview of all the possible applications of FBG sensing technology in biomechanics and rehabilitation and the status of ongoing researches up-to-date all over the world, demonstrating the FBG advances over other existing technologies.