Applications of artificial intelligence in dentomaxillofacial imaging-a systematic review.

BACKGROUND: Artificial intelligence (AI) technology has been increasingly developed in oral and maxillofacial imaging. The aim of this systematic review was to assess the applications and performance of the developed algorithms in different dentomaxillofacial imaging modalities. STUDY DESIGN: A systematic search of PubMed and Scopus databases was performed. The search strategy was set as a combination of the following keywords: "Artificial Intelligence," "Machine Learning," "Deep Learning," "Neural Networks," "Head and Neck Imaging," and "Maxillofacial Imaging." Full-text screening and data extraction were independently conducted by two independent reviewers; any mismatch was resolved by discussion. The risk of bias was assessed by one reviewer and validated by another. RESULTS: The search returned a total of 3,392 articles. After careful evaluation of the titles, abstracts, and full texts, a total number of 194 articles were included. Most studies focused on AI applications for tooth and implant classification and identification, 3-dimensional cephalometric landmark detection, lesion detection (periapical, jaws, and bone), and osteoporosis detection. CONCLUSION: Despite the AI models' limitations, they showed promising results. Further studies are needed to explore specific applications and real-world scenarios before confidently integrating these models into dental practice.

Deep learning for tooth identification and numbering on dental radiography: a systematic review and meta-analysis.

OBJECTIVES: Improved tools based on deep learning can be used to accurately number and identify teeth. This study aims to review the use of deep learning in tooth numbering and identification. METHODS: An electronic search was performed through October 2023 on PubMed, Scopus, Cochrane, Google Scholar, IEEE, arXiv, and medRxiv. Studies that used deep learning models with segmentation, object detection, or classification tasks for teeth identification and numbering of human dental radiographs were included. For risk of bias assessment, included studies were critically analysed using quality assessment of diagnostic accuracy studies (QUADAS-2). To generate plots for meta-analysis, MetaDiSc and STATA 17 (StataCorp LP, College Station, TX, USA) were used. Pooled outcome diagnostic odds ratios (DORs) were determined through calculation. RESULTS: The initial search yielded 1618 studies, of which 29 were eligible based on the inclusion criteria. Five studies were found to have low bias across all domains of the QUADAS-2 tool. Deep learning has been reported to have an accuracy range of 81.8%-99% in tooth identification and numbering and a precision range of 84.5%-99.94%. Furthermore, sensitivity was reported as 82.7%-98% and F1-scores ranged from 87% to 98%. Sensitivity was 75.5%-98% and specificity was 79.9%-99%. Only 6 studies found the deep learning model to be less than 90% accurate. The average DOR of the pooled data set was 1612, the sensitivity was 89%, the specificity was 99%, and the area under the curve was 96%. CONCLUSION: Deep learning models successfully can detect, identify, and number teeth on dental radiographs. Deep learning-powered tooth numbering systems can enhance complex automated processes, such as accurately reporting which teeth have caries, thus aiding clinicians in making informed decisions during clinical practice.

Neurological Risks During Implant Placement in the Anterior Maxilla and Mandible: A Literature Review.

The placement of implants in the anterior maxillary and mandibular region requires esthetic proficiency and surgical finesse. It is important to consider the esthetic outcome while avoiding any type of nerve injury for the patient. In this literature review, anatomical structures of the anterior jaw were reviewed from a gross anatomical and radiographic interpretation. A discussion on the frequency of neurosensory complications for patients as a result of nerve damage in this region was evaluated. The purpose of this literature review was to educate the dental surgeon to consider the anterior jaw's neurological structures when performing procedures like implant surgery. The mandibular incisive canal (MIC) presents as an extension of the inferior alveolar canal that runs between the mental foramina. The MIC is a structure that is easily depicted in cone-beam computed tomography (CBCT) imaging and is present in most subjects in gross anatomical studies. The anterior loop of the mental nerve is another structure that is discussed in this paper. Although its structure is accurately depicted in CBCT images, its anatomical variations in patients can make implant treatment planning difficult. The maxilla contains 2 neurovascular structures that were discussed. First, the nasopalatine canal and its relation and impact on implant placement is evaluated. Case reports are reviewed that outline a prophylactic enucleation and bone grafting of the canal prior to implant placement. Second, the canalis sinuosus, which houses the anterior superior alveolar nerve, is of concern during implant placement in the lateral incisor region. Case reports involving nerve damage with follow-up are discussed.

Artificial Intelligence (AI) for Detection and Localization of Unobturated Second Mesial Buccal (MB2) Canals in Cone-Beam Computed Tomography (CBCT).

The aim of this study was to develop a deep learning model to automatically detect and segment unobturated mesial buccal 2 (MB2) canals on endodontically obturated maxillary molars depicted in CBCT studies. Fifty-seven deidentified CBCT studies of maxillary molars with clinically confirmed unobturated MB2 canals were retrieved from a dental institution radiology database. One-hundred and two maxillary molar roots with and without unobturated MB2 canals were segmented using ITK-SNAP. The data were split into training and testing samples designated to train and evaluate the performance, respectively, of a convolutional neural network (CNN), U-Net. The detection performance revealed a sensitivity of 0.8, a specificity of 1, a high PPV of 1, and a NPV of 0.83 for the testing set, along with an accuracy of 0.9. The segmentation performance of unobturated MB2 canals, assessed using the custom metric, rendered a mean value of 0.3018 for the testing set. The current AI algorithm has the potential to identify obturated and unobturated canals in endodontically treated teeth. However, the AI algorithm is still somewhat affected by metallic artifacts, variations in canal calcifications, and the applied configuration. Thus, further development is needed to improve the algorithm and validate the accuracy using external validation data sets.

Automated Detection of Cervical Carotid Artery Calcifications in Cone Beam Computed Tomographic Images Using Deep Convolutional Neural Networks.

The aim of this study was to determine if a convolutional neural network (CNN) can be trained to automatically detect and localize cervical carotid artery calcifications (CACs) in CBCT. A total of 56 CBCT studies (15,257 axial slices) were utilized to train, validate, and test the deep learning model. The study comprised of two steps: Step 1: Localizing axial slices that are below the C2-C3 disc space. For this step the openly available Inception V3 architecture was trained on the ImageNet dataset of real-world images, and retrained on 40 CBCT studies. Step 2: Detecting CACs in slices from step 1. For this step, two methods were implemented; Method A: Segmentation neural network trained using small patches at random coordinates of the original axial slices; Method B: Segmentation neural network trained using two larger patches at fixed coordinates of the original axial slices with an improved loss function to account for class imbalance. Our approach resulted in 94.2% sensitivity and 96.5% specificity. The mean intersection over union metric for Method A was 76.26% and Method B improved this metric to 82.51%. The proposed CNN model shows the feasibility of deep learning in the detection and localization of CAC in CBCT images.

CBCT Assessment of Ethmoid Roof Variations through Keros, Gera, and TMS Classifications.

Background: This study is designed to assess the variations of the ethmoid roof through the Keros, Gera, and Thailand-Malaysia-Singapore (TMS) classifications by means of Cone-Beam Computed Tomography (CBCT). Materials and Methods: 372 CBCT scans were reviewed. The depth of the olfactory fossa (OF) was defined by the height of the lateral lamella (LL). The degree of the angle formed by the LL and the continuation of the horizontal plane passing through the cribriform plate was calculated. The risk of injury to the skull base was assessed by TMS classification. Results: The distribution of Keros types 1, 2, and 3 was 20.43%, 66.26%, and 13.31%, respectively. No significant difference was seen in the Keros classification among males and females, and asymmetry in the depth of the cribriform plate was seen in 33.3% of patients. 29.57% of the cases had type I, 61.42% had type II, and 9.01% had type III of Gera classification. 33.9% of the patients had asymmetry in the Gera classification. There was not significant difference in the Gera classification among males and females. 95.43%, 4.17%, and 0.40% of patients were of types 1, 2, and 3 of TMS classification, respectively. Conclusion: The most prevalent variations of the ethmoid roof were Keros type II, Gera type II, and TMS type 1. Although the prevalence of the dangerous types (Keros type 3, Gera type III, and TMS type 3) was low, preoperative assessment is essential in reducing surgical complications. CBCT is beneficial in evaluating these variations due to its low radiation dose.

The relationship between diabetes and carotid artery calcifications detected via dental cone-beam computed tomography in patients undergoing implant treatment planning.

BACKGROUND: The authors investigated the association between carotid artery calcifications (CACs) detected incidentally on dental cone-beam computed tomographic scans and positive diabetes status. METHODS: Two patient groups were identified retrospectively from a patient database: positive for CACs based on cone-beam computed tomographic scans and positive diabetes status. In addition to demographic characteristics, data including diabetes status and presence, type, and absence of CACs were obtained. A χ2 statistical analysis was completed by means of dividing the data into sets of known CAC and known history of diabetes; significance level was P < .05. RESULTS: To satisfy the a priori power analysis, records from 2010 through 2021 were used. For the positive CAC group, data were obtained from 288 patients (171 men, 117 women) and 68 patients (24%) had a positive diabetes status at the time of cone-beam computed tomography (P < .001). There were significantly more male patients (n = 47) than female patients (n = 21) with diabetes (χ2 = 9.9; P = .002). For the positive diabetes group, data were obtained from 225 patients (149 men, 76 women), and 100 patients (44%) had an identifiable CAC. There were significantly more male patients (n = 73) than female patients (n = 27) with CAC (χ2 = 21.2; P < .001). CONCLUSIONS: There was a significant relationship to diabetes for patients with CACs, indicating potential undiagnosed diabetes. Male patients with diabetes are significantly more at risk of developing CACs. PRACTICAL IMPLICATIONS: People with CAC may be at risk of having undiagnosed diabetes and require heightened awareness during implant treatment planning.

Metal artifact reduction using common dental materials.

OBJECTIVES: To determine the effect of different dental lab materials on cone beam computed tomography (CBCT) metal artifact at different resolutions. METHODS: A total of seven common dental lab materials were molded to a dental sextant of four extracted, restored teeth. In addition to base alone (control), each material was scanned using the Carestream 9600 CBCT unit at three resolutions - 0.3 mm, 0.15 mm, and 0.075 mm - at manufacturer established exposure parameters. A single, representative axial view of each trial was evaluated for metal artifact both quantitatively by histogram analysis and qualitatively by profile plot analysis in ImageJ. RESULTS: No statistically significant differences between the control and the dental materials were found; however, post-hoc tests showed significance between Blu-mousse® and polyvinyl siloxane with dental materials and control, predominantly in lower resolutions. CONCLUSIONS: The current study provides initial evidence on the influence of dental materials have on CBCT metal artifact as described by beam hardening, photon starvation, scatter, and noise, especially at lower resolutions. Blu-Mousse® and polyvinyl siloxane reduced the perceived beam hardening and photon starvation artifact the greatest, relative to other materials, at all three resolutions and lower resolutions, respectively.

Counterclockwise Drilling with Different Tapered Drills Condenses the Implant Bed-An Optical Coherence Tomography In Vitro Study.

Background and Objectives: To evaluate the condensation and the microarchitecture of implant bed walls of sites prepared with counterclockwise drilling with tapered implant drills using optical coherence tomography. Materials and Methods: Four drill designs with different wall and tip angles were used. Polyurethane laminas resembling type IV bone microarchitecture were superimposed and clamped with a vice to simulate the coronal, middle, and apical aspects of the implant site. Twenty implant beds were prepared at 1200 rpm in clockwise (control) and counterclockwise (test) directions (N = 160). Optical coherence tomography (OCT) was used to evaluate the condensation and microarchitecture characteristics of the implant bed walls. The relative condensation was calculated using the Image J software Bone application. The microarchitecture was evaluated in reconstructed 3D volumes in XY, XZ, and YZ sections. Statistical analysis was performed using one-way ANOVA. Dunnet test was applied to determine differences between groups. Significance was set as p < 0.05. Results: Counterclockwise drilling (Test) condensed and changed the microarchitecture of the apical regions for all the implant beds in all of the groups when compared to clockwise drilling (control). The apical region of test groups showed the highest relative bone condensation (p = 0.026) when compared to controls. Conclusions: The direction of rotation (counterclockwise drilling) and not the design of tapered drills (tip and wall angles) is responsible for the condensation at the apical area observed in polyurethane blocks. The OCT method can be used for the evaluation of changes in density and microstructure of polyurethane blocks.

Laser therapy for dentinal hypersensitivity.

BACKGROUND: Dentinal hypersensitivity is characterized by short, sharp pain from exposed dentine that occurs in response to external stimuli such as cold, heat, osmotic, tactile or chemicals, and cannot be explained by any other form of dental defect or pathology. Laser therapy has become a commonly used intervention and might be effective for dentinal hypersensitivity. OBJECTIVES: To assess the effects of in-office employed lasers versus placebo laser, placebo agents or no treatment for relieving pain of dentinal hypersensitivity. SEARCH METHODS: Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 20 October 2020), the Cochrane Central Register of Controlled Trials (CENTRAL) (the Cochrane Library 2020, Issue 9), MEDLINE Ovid (1946 to 20 October 2020), Embase Ovid (1980 to 20 October 2020), CINAHL EBSCO (Cumulative Index to Nursing and Allied Health Literature; 1937 to 20 October 2020), and LILACS BIREME Virtual Health Library (Latin American and Caribbean Health Science Information database; from 1982 to 20 October 2020). Conference proceedings were searched via the ISI Web of Science and ZETOC, and OpenGrey was searched for grey literature. The US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: Randomized controlled trials (RCTs) in which in-office lasers were compared to placebo or no treatment on patients aged above 12 years with tooth hypersensitivity. DATA COLLECTION AND ANALYSIS: Two review authors independently and in duplicate screened the search results, extracted data, and assessed the risk of bias of the included studies. Disagreement was resolved by discussion. For continuous outcomes, we used mean differences (MD) and 95% confidence intervals (CI). We conducted meta-analyses only with studies of similar comparisons reporting the same outcome measures. We assessed the overall certainty of the evidence using GRADE. MAIN RESULTS: We included a total of 23 studies with 936 participants and 2296 teeth. We assessed five studies at overall low risk of bias, 13 at unclear, and five at high risk of bias. 17 studies contributed data to the meta-analyses. We divided the studies into six subgroups based on the type of laser and the primary outcome measure. We assessed the change in intensity of pain using quantitative pain scale (visual analogue scale (VAS) of 0 to 10 (no pain to worst possible pain)) when tested through air blast and tactile stimuli in three categories of short (0 to 24 hours), medium (more than 24 hours to 2 months), and long term (more than 2 months). Results demonstrated that compared to placebo or no treatment the application of all types of lasers combined may reduce pain intensity when tested through air blast stimuli at short term (MD -2.24, 95% CI -3.55 to -0.93; P = 0.0008; 13 studies, 978 teeth; low-certainty evidence), medium term (MD -2.46, 95% CI -3.57 to -1.35; P < 0.0001; 11 studies, 1007 teeth; very low-certainty evidence), and long term (MD -2.60, 95% CI -4.47 to -0.73; P = 0.006; 5 studies, 564 teeth; very low-certainty evidence). Similarly, compared to placebo or no treatment the application of all types of lasers combined may reduce pain intensity when tested through tactile stimuli at short term (MD -0.67, 95% CI -1.31 to -0.03; P = 0.04; 8 studies, 506 teeth; low-certainty evidence) and medium term (MD -1.73, 95% CI -3.17 to -0.30; P = 0.02; 9 studies, 591 teeth; very low-certainty evidence). However, there was insufficient evidence of a difference in pain intensity for all types of lasers when tested through tactile stimuli in the long term (MD -3.52, 95% CI -10.37 to 3.33; P = 0.31; 2 studies, 184 teeth; very low-certainty evidence). Most included studies assessed adverse events and reported that no obvious adverse events were observed during the trials. No studies investigated the impact of laser treatment on participants' quality of life. AUTHORS' CONCLUSIONS: Limited and uncertain evidence from meta-analyses suggests that the application of laser overall may improve pain intensity when tested through air blast or tactile stimuli at short, medium, or long term when compared to placebo/no treatment. Overall, laser therapy appears to be safe. Future studies including well-designed double-blinded RCTs are necessary to further investigate the clinical efficacy of lasers as well as their cost-effectiveness.

An unusual presentation of osteoblastoma of the maxilla: A case report.

This report presents a rare case of maxillary osteoblastoma in a 17-year-old female. The patient presented with dull pain and facial asymmetry inferior to the left zygoma. An intraoral examination found a painless swelling on the buccal gingival tissue in the left posterior maxilla. Panoramic radiographs and multidetector computed tomographic images revealed an ill-defined, non-corticated, mixed attenuating entity of osseous density located within the left posterior maxilla apical to the left maxillary molars. The entity exhibited a heterogeneous internal structure with a fine granular appearance, and the periphery showed a partial hypo-attenuating rim along the antero-medial aspect. Expansion of the left posterior maxilla accompanied with displacement of the left maxillary sinus floor was noted. External root resorption of the first and second molars was noted, as well as postero-superior displacement of the third molar. The histopathologic diagnosis of the biopsy was osteoblastoma. Complete excision of the tumor was performed.

Comparison Efficiency of Posteroanterior Cephalometry and Cone-beam Computed Tomography in Detecting Craniofacial Asymmetry: A Systematic Review.

OBJECTIVES: The aim of this systematic review is to compare cone-beam computed tomography (CBCT) and two-dimensional radiography in the assessment of facial asymmetry. METHODS: Three valid electronic databases (PubMed, Scopus, and Web of Science) were searched for articles published from 1973 to February 2017. Hand searching was done through references of selected articles, internal thesis, and national and international conferences. The titles and abstracts obtained from the search were evaluated by reviewers according to the inclusion and exclusion criteria. RESULTS: The established search strategy identified 2137 articles. A total of 2079 articles were from electronic search in three international databases and 58 articles from hand searching. After eliminating duplicate articles and on the basis of inclusion and exclusion criteria, 13 articles and 1 thesis entered the final analysis. Bayesian meta-analysis was done due to the heterogeneity of articles and the differences related to the methodology of the studies. According to this method, analyzing J-J landmark in two studies showed that there were no statistical differences between posteroanterior (PA) radiography and three-dimensional method with reference standard. CONCLUSION: The results of the study showed that there was no preference between the two techniques in measuring and diagnosing the landmarks and evaluating asymmetry. It can be concluded that in patients having problems other than asymmetry and need more information for the treatment plan, CBCT is more helpful than PA cephalometry.

Light transmittance of CAD/CAM ceramics with different shades and thicknesses and microhardness of the underlying light-cured resin cement.

OBJECTIVES: The aim of this in vitro study was to evaluate the effects of the thickness and shade of 3 types of computer-aided design/computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS: A total of 120 specimens of 2 shades (A1 and A3) and 2 thicknesses (1 and 2 mm) were fabricated using VITA Mark II (VM; VITA Zahnfabrik), IPS e.max CAD (IE; IvoclarVivadent), and VITA Suprinity (VS; VITA Zahnfabrik) (n = 10 per subgroup). The amount of light transmission through the ceramic specimens was measured by a radiometer (Optilux, Kerr). Light-cured resin cement samples (Choice 2, Bisco) were fabricated in a Teflon mold and activated through the various ceramics with different shades and thicknesses using an LED unit (Bluephase, IvoclarVivadent). In the control group, the resin cement sample was directly light-cured without any ceramic. Vickers microhardness indentations were made on the resin surfaces (KoopaPazhoohesh) after 24 hours of dark storage in a 37°C incubator. Data were analyzed using analysis of variance followed by the Tukey post hoc test (α = 0.05). RESULTS: Ceramic thickness and shade had significant effects on light transmission and the microhardness of all specimens (p < 0.05). The mean values of light transmittance and microhardness of the resin cement in the VM group were significantly higher than those observed in the IE and VS groups. The lowest microhardness was observed in the VS group, due to the lowest level of light transmission (p < 0.05). CONCLUSION: Greater thickness and darker shades of the 3 types of CAD/CAM ceramics significantly decreased the microhardness of the underlying resin cement.

The Effect of Composite Thickness on the Stress Distribution Pattern of Restored Premolar Teeth with Cusp Reduction.

PURPOSE: Different thicknesses of restorative material can alter the stress distribution pattern in remaining tooth structure. The assumption is that a thicker composite restoration will induce a higher fracture resistance. Therefore, the present study evaluated the effect of composite thickness on stress distribution in a restored premolar with cusp reduction. MATERIALS AND METHODS: A 3D solid model of a maxillary second premolar was prepared and meshed. MOD cavities were designed with different cusp reduction thicknesses (0, 0.5, 1, 1.5, 2.5 mm). Cavities were restored with Valux Plus composite. They were loaded with 200 N force on the occlusal surface in the direction of the long axis. Von Mises stresses were evaluated with Abaqus software. RESULTS: Stress increased from occlusal to gingival and was maximum in the cervical region. The stressed area in the palatal cusp was more than that of the buccal cusp. Increasing the thickness of composite altered the shear stress to compressive stress in the occlusal area of the teeth. CONCLUSION: The model with 2.5 mm cusp reduction exhibited the most even stress distribution.

Tissue characterization using optical coherence tomography and cone beam computed tomography: a comparative pilot study.

OBJECTIVES: To evaluate the ability of optical coherence tomography (OCT) in differentiating human oral tissues in comparison with cone beam computed tomography. STUDY DESIGN: In this study, we imaged four types of tissues ex vivo: human enamel, human cortical bone, human trabecular bone, and fatty tissue plus water and air by using OCT (Axsun Inc., Billerica, MA). We then developed a method for qualitative and quantitative analyses of the human specimens. The same types of tissues were also imaged using cone beam computed tomography, and gray-scale values were measured. RESULTS: The qualitative indices (intensity profile, contour plot, and histogram) for OCT images were able to provide information regarding surface characteristics as well as changes in tissue properties at different interfaces. The quantitative index (pixel intensity values) was also able to render information regarding the distribution and density of the pixels in different samples. A similar pattern was observed in the pixel intensity values and gray-scale values in both imaging modalities. CONCLUSIONS: Within the limitations of this ex vivo pilot study, OCT can reliably differentiate between a range of hard and soft tissues.

The effect of He-Ne and Ga-Al-As lasers on the healing of oral mucosa in diabetic mice.

Delayed wound healing is one of the complications of diabetes mellitus. Low-level laser therapy (LLLT) has been used to accelerate wound healing however the effect of LLLT on the hard palate wound healing in streptozotocin-induced diabetic (STZ-D) mice has not yet been characterized. This study aims to determine the effect of LLLT (He-Ne and Ga-Al-As laser) on the process of wound healing in the hard palate among diabetic and non-diabetic mice. 90 adult male mice were divided into six groups. Type 1 diabetes mellitus was induced in three groups by means of injection of STZ. Of these, one group was irradiated with He-Ne laser (DH group), one with Ga-Al-As laser (DG group) and one did not undergo any LLLT (DC group). The remaining groups were non-diabetic which were allotted to laser therapy with He-Ne laser (NH group) or with Ga-Al-As laser (NG group) or no LLLT (NC group). Five animals from each group were killed on the third, seventh, and fourteenth days after surgery, and biopsies were made for histological analysis. On the 3rd and 7th days after the surgery, the number of polymorphonuclear (PMN) cells in NH, DH, NG, and DG groups was significantly lower than that of the control groups. On the 3rd, 7th and 14th days, the fibroblasts and new blood vessel counts and collagen fibers in diabetic laser treated groups (DG and DH) were significantly higher compared to that of NC, DC, NH and NG groups. On the 7th and 14th days, the fibroblasts and new blood vessel counts and collagen fibers in NH, DH, NG, and DG groups were also significantly higher than that of the control groups, and the fibroblast and new blood vessel counts and collagen density fibers in NH and DH groups were higher than that of the NG and DG groups. LLLT with He-Ne laser compared to Ga-Al-As laser has a positive healing effect on hard palate gingival wounds in STZ-D mice.

Cone Beam CT Analysis of Tempora Bone Pneumatizatioi in Subjects with Unilateral Cleft Lip and Palate.

OBJECTIVES: To evaluate the pneumatization pattern in the temporal bone in patients with cleft lip and palate. METHODS: A retrospective observational analysis of cone beam computed tomography (CBCT) scans of patients with cleft lip and palate was done. The patients were referred for orthodontic treatment and had a unilateral cleft lip and palate and anterior maxillary constriction. Four reference structures were identified to evaluate the extension of pneumatization in the cleft vs non-cleft side temporal bones. RESULTS: Twenty patients had cleft on the left side and nine patients had cleft on the right side, This study found reduced temporal bone pneumatization on the side of the cleft. The mean score of temporal bone pneumatization on the cleft side was 4.7±1.47 while mean score of pneumatization on the non-cleft side was 6.7±1.80 (P<0.001). CONCLUSIONS: Pneumatization of the temporal bone was significantly lower on the side of the cleft and an identification of this change can help in early diagnosis and management of any ear-related conditions in this vulnerable group of patients to make appropriate referrals for specialized care.

Effect of Low-Level Laser Therapy on Orthodontic Tooth Movement: A Clinical Investigation.

OBJECTIVES: One major drawback of orthodontic treatment is its long duration due to slow tooth movement and the pain at the onset of treatment following application of forces. There is controversy regarding the efficacy of laser for decreasing the treatment time and pain of orthodontic treatment. The purpose of this study was to investigate the effect of low level diode laser on the rate of orthodontic tooth movement and the associated pain. MATERIALS AND METHODS: In this double blind randomized controlled clinical trial, 12 orthodontic patients referring to Shahid Beheshti School of Dentistry for first premolar extraction were randomly selected and allocated to gallium aluminum-arsenide laser (GA-AL-AS diode laser, 880 nm, 100 mW, 5 j/cm(2), 8 points, 80 seconds, continuous mode) or control group. The patients initially underwent leveling and alignment using the sectional system. Force (150 gr) was applied to each canine tooth via sectional closing loops. The loops were activated every month. The rate of tooth movement and pain were monitored over the treatment period and recorded on days 1, 3, 7, 30, 33, 37, 60, 63 and 67. Two-way ANOVA was used for comparison of groups. RESULTS: There was no significant difference in terms of tooth movement and pain scores between the irradiated and non-irradiated sides at any time point (P>0.05). CONCLUSION: Although laser enhanced orthodontic tooth movement in the upper jaw, we failed to provide solid evidence to support the efficacy of laser for expediting tooth movement or reducing the associated pain.

Interventions for the management of external root resorption.

BACKGROUND: External root resorption is a pathological process, which tends to occur following a wide range of mechanical or chemical stimuli such as infection, pressure, trauma or orthodontic tooth movement. Although it is predominantly detected by radiography, in some cases root resorption may be identified by clinical symptoms such as pain, swelling and mobility of the tooth. Treatment alternatives are case-dependent and aim to address the cause of the resorption and aid the regeneration of the resorptive lesion. OBJECTIVES: To evaluate the effectiveness of any interventions that can be used in the management of external root resorption in permanent teeth. SEARCH METHODS: The following electronic databases were searched: the Cochrane Oral Health Group Trials Register (to 14 October 2015), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library, 2015, Issue 9), MEDLINE via OVID (1946 to 14 October 2015) and EMBASE via OVID (1980 to 14 October 2015). We searched the US National Institutes of Health Trials Register (http://clinicaltrials.gov) and the WHO Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: We included randomised controlled trials of permanent teeth with any type of external root resorption, which has been confirmed by clinical and radiological examination, comparing one type of intervention (root canal medications and canal filling, splinting or extraction of teeth or the surgical removal of any relevant pathology) with another, or with placebo or no treatment. DATA COLLECTION AND ANALYSIS: Two review authors screened search records independently. Full papers were obtained for potentially relevant trials. If data had been extracted, the statistical guidelines set out in the Cochrane Handbook would have been followed. MAIN RESULTS: No randomised controlled trials that met the inclusion criteria were identified. However, we identified one ongoing study that is potentially relevant to this review and will be assessed when it is published. AUTHORS' CONCLUSIONS: We were unable to identify any reports of randomised controlled trials regarding the efficacy of different interventions for the management of external root resorption. In view of the lack of reliable evidence on this topic, clinicians must decide on the most appropriate means of managing this condition according to their clinical experience with regard to patient-related factors. There is a need for well designed and conducted clinical trials on this topic, which conform to the CONSORT statement (www.consort-statement.org/).

Radiographic evaluation of the maxillary sinus prior to dental implant therapy: A comparison between two-dimensional and three-dimensional radiographic imaging.

PURPOSE: This study was performed to evaluate the diagnostic efficacy of panoramic radiography and cone-beam computed tomography (CBCT) in detecting sinus pathology. MATERIALS AND METHODS: This study was based on a retrospective evaluation of patients who had undergone both a panoramic radiograph and a CBCT exam. A total of 100 maxillary sinuses were evaluated. Four examiners with various levels of expertise evaluated the images using a five-point scoring system. Receiver operating characteristic (ROC) curve analysis was performed to evaluate the diagnostic efficacy of the two modalities. The image analysis was repeated twice, with at least two weeks between the evaluation sessions. Interobserver reliability was assessed using Cronbach's alpha, and intraobserver reliability was assessed using Cohen's kappa. RESULTS: Maxillary sinus pathology was detected in 72% of the patients. High interobserver and intraobserver reliability were observed for both imaging modalities and among the four examiners. Statistical analyses using ROC curves demonstrated that the CBCT images had a larger area under the curve (0.940) than the panoramic radiographs (0.579). CONCLUSION: Three-dimensional evaluation of the sinus with CBCT was significantly more reliable in detecting pathology than panoramic imaging.