Pathway to a molecular calcium methyl.

The dimeric ß-diketiminato calcium hydride, [(BDI)CaH]2 (BDI = HC{(Me)CN-2,6-iPr2C6H3}2), reacts with ZnMe2 to afford the bimetallic calcium zincate complex, [(BDI)Ca(µ-CH3)2Zn(µ-H)]2, which subsequently undergoes an intramolecular reaction to effect the formation of [(BDI)CaMe]2, a notable omission from the homologous series of ß-diketiminato alkylcalcium derivatives.

Alkali metal reduction of crown ether encapsulated alkali metal cations.

[{SiNDipp}BeClM]2 ({SiNDipp} = {CH2SiMe2N(Dipp)}2; M = Li, Na, K, Rb) are converted to ionic species by treatment with a crown ether. Whereas the lithium derivative reacts with Na or K to provide [{SiNDipp}BeCl]-[M(12-cr-4)2]+ (M = Na, K), the resultant sodium species is resistant to reduction by potassium. These observations are rationalised by a hybrid experimental/theoretical analysis.

The borylamino-diborata-allyl anion.

Reactions of ß-diketiminato alkaline earth alkyldiboranate derivatives [(BDI)Ae{pinBB(R)pin}] (BDI = HC{(Me)CNDipp}2; Dipp = 2,6-i-Pr2C6H3; Ae = Mg, R = n-Bu or Ae = Ca, R = n-hexyl) with t-BuNC provide access to the respective group 2 derivatives of unprecedented diborata-allyl, {(pinB)2CNBpin(t-Bu)}-, anions. Although the necessary mode of B-C bond cleavage implicated in these transformations could not be elucidated, further studies of the reactivity of magnesium triboranates toward isonitriles delivered a more general and rational synthetic access to analogous anionic moieties. Extending this latter reactivity to a less symmetric triboranate variant also provided an isomeric Mg-C-bonded dibora-alkyl species and sufficient experimental insight to prompt theoretical evaluation of this reactivity. DFT calculations, thus, support a reaction pathway predicated on initial RNC attack at a peripheral boron centre and the intermediacy of such dibora-alkyl intermediates.

[{SiNDipp}MgNa]2: A Potent Molecular Reducing Agent.

The bimetallic species, [{SiNDipp}MgNa]2 [{SiNDipp} = {CH2SiMe2N(Dipp)}2; (Dipp = 2,6-i-Pr2C6H3)], is shown to be a potent reducing agent, able to effect one- or two-electron reduction of either dioxygen, TEMPO, anthracene, benzophenone, or diphenylacetylene. In most cases, the bimetallic reaction products imply that the dissimilar alkaline metal centers react with a level of cooperativity. EPR analysis of the benzophenone-derived reaction and the concurrent isolation of [{SiNDipp}Mg(OCPh2)2], however, illustrate that treatment with such reducible, but O-basic, species can also result in reactivity in which the metals provide independent reaction products. The notable E-stereochemistry of the diphenylacetylene reduction product prompted a computational investigation of the PhC≡CPh addition. This analysis invokes a series of elementary steps that necessitate ring-opening via Mg+ → Na+ amido group migration of the SiNDipp ligand, providing insight into the previously observed lability of the bidentate dianion and its consequent proclivity toward macrocyclization.

Synthesis and Characterization of a Terminal Iron(II)-PH2 Complex and a Series of Iron(II)-PH3 Complexes.

Reported is the reaction of a series of iron(II) bisphosphine complexes with PH3 in the presence of NaBArF4 [where BArF4 = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate]. The iron(II) bisphosphine reagents bear two chlorides or a hydride and a chloride motif. We have isolated six different cationic terminal-bound PH3 complexes and undertaken rigorous characterization by NMR spectroscopy, single crystal X-ray diffraction, and mass spectrometry, where the PH3 often remains intact during the ionization process. Unusual bis- and tris-PH3 complexes are among the compounds isolated. Changing the monophosphine from PH3 to PMe3 results in the formation of an unusual Fe7 cluster, but with no PMe3 being ligated. Finally, by using an iron(0) source, we have provided a rare example of a terminally bound iron-PH2 complex.

From alkaline earth to coinage metal carboranyls.

The ß-diketiminato calcium and magnesium complexes, [(BDI)MgnBu] and [(BDI)CaH]2 (BDI = HC{C(Me)NDipp}2; Dipp = 2,6-di-isopropylphenyl), react with ortho-carborane (o-C2B10H12) to provide the respective [(BDI)Ae(o-C2B10H11)] (Ae = Mg or Ca) complexes. While the lighter group 2 species is a monomer with magnesium in a distorted trigonal planar environment, the heavier analogue displays a puckered geometry at calcium in the solid state due to Ca⋯H-B intermolecular interactions. These secondary contacts are, however, readily disrupted upon addition of THF to provide the 4-coordinate monomer, [(BDI)Ca(THF)(o-C2B10H11)]. [(BDI)Mg(o-C2B10H11)] was reacted with [NHCIPrMCl] (NHCIPr = 1,3-bis(isopropyl)imidazol-2-ylidene; M = Cu, Ag, Au) to provide [NHCIPrM(o-C2B10H11)], rare C-bonded examples of coinage metal derivatives of unsubstituted (o-C2B10H11)- and confirming the alkaline earth compounds as viable reagents for the transmetalation of the carboranyl anion.

Cesium Reduction of a Lithium Diamidochloroberyllate.

Room temperature reaction of elemental cesium with the dimeric lithium chloroberyllate [{SiNDipp}BeClLi]2 [{SiNDipp} = {CH2SiMe2N(Dipp)}2, where Dipp = 2,6-di-isopropylphenyl, in C6D6 results in activation of the arene solvent. Although, in contrast to earlier observations of lithium and sodium metal reduction, the generation of a mooted cesium phenylberyllate could not be confirmed, this process corroborates a previous hypothesis that such beryllium-centered solvent activation also necessitates the formation of hydridoberyllium species. These observations are further borne out by the study of an analogous reaction performed in toluene, in which case the proposed generation of formally low oxidation state beryllium radical anion intermediates induces activation of a toluene sp3 C-H bond and the isolation of the polymeric cesium benzylberyllate, [Cs({SiNDipp}BeCH2C6H5)]∞.

Dial-a-base mechanochemical synthesis of N-heterocyclic carbene copper complexes.

Liquid assisted ball milling of [NHC]HBr (NHC = N-heterocyclic carbene) salts with copper(I) chloride, and a range of alkali metal complexes was shown to efficiently produce (NHC)CuX (NHC = normal or RE-NHC, X = halide, alkoxide, amide, alkyl, aryl; RE-NHC = ring-expanded NHC).

The structures and reactivity of NHC-supported copper(i) triphenylgermyls.

Deprotonation of triphenyl germane with NHC-supported copper alkoxides afforded four novel (NHC)CuGePh3 complexes. Of these, (IPr)CuGePh3 (IPr = :C{N(2,6-iPr2C6H3)CH}2) was selected for further investigation. Analysis by EDA-NOCV indicates it to be a germyl nucleophile and its σ-bond metathesis reaction with a range of p-block halides confirmed it to be a convenient source of [Ph3Ge]-. The Cu-Ge bond of (IPr)CuGePh3 underwent π-bond insertions with tBuNCS, CS2, and PhNCO to furnish a series of germyl substituted carboxylate derivatives, (IPr)CuXC(Y)GePh3 (X = S, NPh; Y = S, NtBu, O), which were structurally characterised. (IPr)CuGePh3 inserted phenyl acetylene, providing both the Markovnikov and anti-Markovnikov products. The (NHC)CuGePh3 compounds were validated as catalytic intermediates; addition of 10 mol% of NHC-copper(i) alkoxide to a mixture of triphenyl germane and a tin(iv) alkoxide resulted in a tin/germanium cross coupling with concomitant formation of alcohol. Moreover, a catalytic hydrogermylation of Michael acceptors was developed with Ph3GeH adding to 7 activated alkenes in good conversions and yields in the presence of 10 mol% of NHC-copper(i) alkoxide. In all cases, this reaction provided the ß-germylated substrate implicating nucleophilicity at germanium.

Acyclic Boryl Complexes of Copper(I).

Reaction of (6-Dipp)CuOtBu (6-Dipp=C{NDippCH2 }2 CH2 , Dipp=2,6-iPr2 C6 H3 ) with B2 (OMe)4 provided access to (6-Dipp)CuB(OMe)2 via σ-bond metathesis. (6-Dipp)CuB(OMe)2 was characterised by NMR spectroscopy and X-ray crystallography and shown to be a monomeric acyclic boryl of copper. (6-Dipp)CuB(OMe)2 reacted with ethylene and diphenylacetylene to provide insertion compounds into the Cu-B bond which were characterised by NMR spectroscopy in both cases and X-ray crystallography in the latter. It was also competent in the rapid catalytic deoxygenation of CO2 in the presence of excess B2 (OMe)4 . Alongside π-insertion, (6-Dipp)CuB(OMe)2 reacted with LiNMe2 to provide a salt metathesis reaction at boron, giving (6-Dipp)CuB(OMe)NMe2 , a second monomeric acyclic boryl, which also cuproborated diphenylacetylene. Computational interrogation validated these acyclic boryl species to be electronically similar to (6-Dipp)CuBpin.

Alkali metal reduction of alkali metal cations.

Counter to synthetic convention and expectation provided by the relevant standard reduction potentials, the chloroberyllate, [{SiNDipp}BeClLi]2 [{SiNDipp} = {CH2SiMe2N(Dipp)}2; Dipp = 2,6-i-Pr2C6H3)], reacts with the group 1 elements (M = Na, K, Rb, Cs) to provide the respective heavier alkali metal analogues, [{SiNDipp}BeClM]2, through selective reduction of the Li+ cation. Whereas only [{SiNDipp}BeClRb]2 is amenable to reduction by potassium to its nearest lighter congener, these species may also be sequentially interconverted by treatment of [{SiNDipp}BeClM]2 by the successively heavier group 1 metal. A theoretical analysis combining density functional theory (DFT) with elemental thermochemistry is used to rationalise these observations, where consideration of the relevant enthalpies of atomisation of each alkali metal in its bulk metallic form proved crucial in accounting for experimental observations.

Seven-Membered Cyclic Diamidoalumanyls of Heavier Alkali Metals: Structures and C-H Activation of Arenes.

Like the previously reported potassium-based system, rubidium and cesium reduction of [{SiNDipp}AlI] ({SiNDipp} = {CH2SiMe2NDipp}2) with the heavier alkali metals [M = Rb and Cs] provides dimeric group 1 alumanyl derivatives, [{SiNDipp}AlM]2. In contrast, similar treatment with sodium results in over-reduction and incorporation of a formal equivalent of [{SiNDipp}Na2] into the resultant sodium alumanyl species. The dimeric K, Rb, and Cs compounds display a variable efficacy toward the C-H oxidative addition of arene C-H bonds at elevated temperatures (Cs > Rb > K, 110 °C) to yield (hydrido)(organo)aluminate species. Consistent with the synthetic experimental observations, computational (DFT) assessment of the benzene C-H activation indicates that rate-determining attack of the Al(I) nucleophile within the dimeric species is facilitated by π-engagement of the arene with the electrophilic M+ cation, which becomes increasingly favorable as group 1 is descended.

Iron(II)-Catalyzed Activation of Si-N and Si-O Bonds Using Hydroboranes.

We report the activation and functionalization of Si-N bonds with pinacol borane catalyzed by a three-coordinate iron(II) ß-diketiminate complex. The reactions proceed via the mild activation of silazanes to yield useful hydrosilanes and aminoboranes. The reaction is studied by kinetic analysis, along with a detailed investigation of decomposition pathways using catecholborane as an analogue of the pinacol borane used in catalysis. We have extended the methodology to develop a polycarbosilazane depolymerization strategy, which generates hydrosilane quantitatively along with complete conversion to the Bpin-protected diamine. The analogous Si-O bond cleavage can also be achieved with heating, using silyl ether starting materials to generate hydrosilane and alkoxyborane products. Depolymerization of poly(silyl ether)s using our strategy successfully converts the polymer to 90% Bpin-protected alcohols.

Aluminum-Boron Bond Formation by Boron Ester Oxidative Addition at an Alumanyl Anion.

The potassium diamidoalumanyl, [K{Al(SiNDipp)}]2 (SiNDipp = {CH2SiMe2NDipp}2), reacts with the terminal B-O bonds of pinacolato boron esters, ROBpin (R = Me, i-Pr), and B(OMe)3 to provide potsassium (alkoxy)borylaluminate derivatives, [K{Al(SiNDipp)(OR)(Bpin)}]n (R = Me, n = 2; R = i-Pr, n = ∞) and [K{Al(SiNDipp)(OMe)(B(OMe)2)}]∞, comprising Al-B σ bonds. An initial assay of the reactivity of these species with the heteroallene molecules, N,N'-diisopropylcarbodiimide and CO2, highlights the kinetic inaccessibility of their Al-B bonds; only decomposition at high temperature is observed with the carbodiimide, whereas CO2 preferentially inserts into the Al-O bond of [K{Al(SiNDipp)(OMe)(Bpin)}]2 to provide a dimeric methyl carbonate species. Treatment of the acyclic dimethoxyboryl species, however, successfully liberates a terminal alumaboronic ester featuring trigonal N2Al-BO2 coordination environments at both boron and aluminum.

Variable Ca-Caryl Hapticity and its Consequences in Arylcalcium Dimers.

The dimeric ß-diketiminato calcium hydride, [(Dipp BDI)CaH]2 (Dipp BDI = HC{(Me)CN-2,6-i-Pr2 C6 H3 }2 ), reacts with ortho-, meta- or para-tolyl mercuric compounds to afford hydridoarylcalcium compounds, [(Dipp BDI)2 Ca2 (µ-H)(µ-o-,m-,p-tolyl)], in which dimer propagation occurs either via µ2 -η1 -η1 or µ2 -η1 -η6 bridging between the calcium centers. In each case, the orientation and hapticity of the aryl units is dependent upon the position of the methyl substituent. While wholly organometallic meta- and para-tolyl dimers, [(Dipp BDI)Ca(m-tolyl)]2 and [(Dipp BDI)Ca(p-tolyl)]2 , can be prepared and are stable, the ortho-tolyl isomer is prone to isomerization to a calcium benzyl analog. Computational analysis of this latter process with density functional theory (DFT) highlights an unusual mechanism invoking the generation of an intermediate dicalcium species in which the group 2 centers are bridged by a toluene dianion formed by the formal attachment of the original hydride anion to the initially generated ortho-tolyl substituent. Use of a more sterically encumbered aryl substituent, {3,5-t-Bu2 C6 H3 }, facilitates the selective formation of [(Dipp BDI)Ca(µ-H)(µ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)], which can be converted into the unsymmetrically-substituted σ-aryl calcium complexes, [(Dipp BDI)Ca(µ-Ph)(µ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)] and [(Dipp BDI)Ca(µ-p-tolyl)(µ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)] by reaction with the appropriate mercuric diaryl. Conversion of [(Dipp BDI)Ca(H)(Ph)Ca(Dipp BDI)] to afford [{{(Dipp BDI)Ca}2 (µ2 -Cl)}2 (C6 H5 -C6 H5 )], comprising a biphenyl dianion, is also reported. Although this latter transformation is serendipitous, AIM analysis highlights that, in a related manner to the ortho-tolyl to benzyl isomerization, the requisite C-C coupling may be facilitated in an "across dimer" fashion by the experimentally-observed polyhapto engagement of the aryl substituents with each calcium.

The Complex Reactivity of [(salen)Fe]2(µ-O) with HBpin and Its Implications in Catalysis.

We report a detailed study into the method of precatalyst activation during alkyne cyclotrimerization. During these studies we have prepared a homologous series of Fe(III)-µ-oxo(salen) complexes and use a range of techniques including UV-vis, reaction monitoring studies, single crystal X-ray diffraction, NMR spectroscopy, and LIFDI mass spectrometry to provide experimental evidence for the nature of the on-cycle iron catalyst. These data infer the likelihood of ligand reduction, generating an iron(salan)-boryl complex as a key on-cycle intermediate. We use DFT studies to interrogate spin states, connecting this to experimentally identified diamagnetic and paramagnetic species. The extreme conformational flexibility of the salan system appears connected to challenges associated with crystallization of likely on-cycle species.

An acyclic aluminyl anion.

The potassium aluminyl complex K2[Al{N(Dipp)SiMe3}2]2 was synthesised via reduction of [AlI{N(Dipp)SiMe3}2] (Dipp = 2,6-i-Pr2C6H3). This represents the first example of an aluminyl anion supported by an acyclic ligand framework. Attempts to yield the same structure with a larger ligand framework, {N(Dipp)Si(i-Pr)3}, led to C-H cleavage. K2[Al{N(Dipp)SiMe3}2]2 behaves as a nucleophilic source of aluminium; reaction with an electrophilic ß-diketiminate supported magnesium(II) iodide forms a monomeric, acyclic magnesium aluminyl complex.

Cooperative dihydrogen activation at a Na(I)2/Mg(I)2 ensemble.

[{SiNDipp}MgNa]2 ({SiNDipp} = {CH2SiMe2N(Dipp)}2; Dipp = 2,6-i-Pr2C6H3) reacts directly with H2 to provide a heterobimetallic hydride. Although the transformation is complicated by the simultaneous disproportionation of magnesium, computational density functional theory (DFT) studies suggest that this reactivity is initiated by orbitally-constrained and interactions between the frontier MOs of both H2 and the tetrametallic core of [{SiNDipp}MgNa]2.

Structural snapshots of an Al-Cu bond-mediated transformation of terminal acetylenes.

The copper(i) alumanyl derivative, [{SiNDipp}Al-Cu(NHCiPr)] (SiNDipp = {CH2SiMe2NDipp}2; Dipp = 2,6-di-isopropylphenyl; NHCiPr = N,N'-di-isopropyl-4,5-dimethyl-2-ylidene), reacts in a stepwise fashion with up to three equivalents of various terminal alkynes. This reactivity results in the sequential formation of cuprous (hydrido)(alkynyl)aluminate, (alkenyl)(alkynyl)aluminate and bis(alkynyl)aluminate derivatives, examples of which have been fully characterised. The process of alkene liberation resulting from the latter reaction step constitutes a unique case of alkyne transfer semi-hydrogenation in which the C-H acidic alkyne itself acts as a source of proton, with the Cu-Al bond providing the requisite electrons to effect reduction. This reaction sequence is validated by DFT calculations, which rationalise the variable stability of the initially formed heterobimetallic hydrides.

Selective hydroboration of electron-rich isocyanates by an NHC-copper(I) alkoxide.

The (IPr)CuOtBu catalysed reduction of 11 aryl and alkyl isocyanates with pinacolborane gave only the boraformamides, pinBN(R)C(O)H, in most cases. Overreduction, which hampers almost all isocyanate hydroborations, was restricted to electron poor aryl isocyanates (4-NC-C6H4NCO, 4-F3C-C6H4NCO, 3-O2N-C6H4NCO). Computational analysis showed stability of [(IPr)CuH]2, which was proposed to be the catalyst resting state, drives selectivity, suggesting an approach to prevent overreduction in future work. In the case of iPrNCO, formation of this species renders overreduction kinetically inaccessible. For 4-NC-C6H4NCO, however, the barrier height for the first step of over-reduction is much lower, even relative to [(IPr)CuH]2, resulting in unselective reduction.