Countermeasures for the construction of occupational health information standard system / 中华劳动卫生职业病杂志

As an important part of health information standard system, occupational health information standard system is the foundation and guarantee of promoting the construction of occupational health information. This article is based on the literature research about current situation of domestic and foreign health information standards and occupational health information standard system, thus take "the National Health Information Standardization System" and "the National Public Health Information Construction Standards and Norms" into account, focus on the requirements of occupational health information construction and related work. Thus, put forward suggestions on the construction of occupational health information standard system, to accelerate the occupational health information construction, data collection, transmission and application.

Derived patterns of musculoskeletal symptoms and their relationships with ergonomic factors among electronic assembly workers: A latent class analysis.

INTRODUCTION: Multi-site musculoskeletal symptoms (MSS) are considered to be more common and have more serious consequences than single-site MSS. This study aimed to determine whether derived patterns of MSS may be identified in electronic assembly workers and if extracted MSS classes are associated with personal and work-related factors. METHOD: A cross-sectional questionnaire study was performed with 700 participating electronic assembly workers. The questionnaire included individual factors, psychosocial and physical exposures, and MSS. The derived patterns of MSS and their relationships with ergonomic factors were analyzed using latent class analysis (LCA) and multinomial logistic regression models (MLRM). RESULTS: The 1-year prevalence of MSS affecting only one body site or two or more body sites was 14.9% and 32.7%, respectively. The results of LCA showed three distinct classes of MSS patterns, which were labelled 'MSS in most sites' (5.0%), 'MSS in neck and shoulder' (27.0%), and 'MSS in one or no site' (68.0%). The results of MLRM showed that the 'MSS in neck and shoulder' was associated with job tenure (OR 5.579, 95% CI 2.488-12.511), excessive dynamic and static loads (OR 3.868, 95% CI 1.702-8.793 and OR 5.270, 95% CI 2.020-13.747, respectively); while the 'MSS in most sites' was associated with high job demands (OR 4.528, 95% CI 1.647-12.445) and excessive dynamic loads (OR 111.554, 95% CI 4.996-2490.793). CONCLUSIONS: The results showed unique patterns of MSS among electronic assembly workers that were associated with personal and work-related factors. PRACTICAL APPLICATIONS: The findings highlight that the high prevalence of multi-site MSS in this group should be a focus. It also provides further evidence that LCA considering the number and location of anatomical sites involving MSS can be used to determine distinct classes of MSS patterns, which is of great significance for the epidemiological study and management of MSS in the future.

[Research on emergency management and legal system of occupational disease accidents in China].

A great deal of work has carried out and get some achieved in the construction of emergency management and legal system for dealing with occupational disease accidents in China, however, the governance of occupational disease accidents is still weak in occupational health management. Based on the analysis of the situation of occupational disease accident emergency management and legal system construction at home and abroad, this paper summarizes the problems existing in the governance of occupational disease accidents, such as the need to further define the connotation and extension, the need to improve the regulations and policies, and the need to establish and improve the emergency management system. It is considered that it is very important to carry out research on the scientific definition, classification and management of occupational disease accidents.

Study on the Associations of Individual and Work-Related Factors with Low Back Pain among Manufacturing Workers Based on Logistic Regression and Structural Equation Model.

Work-related musculoskeletal injuries are one of the major occupational health issues of the workers, especially low back pain (LBP). The aim of this study was to survey the prevalence of LBP among manufacturing workers and to identify associations of individual and work-related factors with LBP. A cross-sectional questionnaire study was performed with 1173 participating manufacturing workers. The questionnaire included individual factors, psychosocial and physical exposures, and musculoskeletal discomfort. It was analyzed by logistic regression and structural equation modeling (SEM). The 1-year prevalence of LBP among Chinese manufacturing workers was 33.6%. Logistic regression analysis showed that job tenure, awkward postures, vibration and job demand were positively-while social support and job control were negatively associated with LBP (p < 0.05). The SEM results indicated that, as shown in other studies, job types, job tenure, postural load, high job demand, low job control and vibration were directly associated with LBP, but also that job types, high job demand, low social support and vibration may have indirect effects on LBP-mediated by postural load.

Influencing factors of work-related musculoskeletal disorders among dentists / 中国职业医学

OBJECTIVE: To analyze the prevalence of work-related musculoskeletal disorders(WMSDs) among dentists and explore its influencing factors. METHODS: A total of 455 dentists from 9 medical organizations of Beijing and Fuzhou cities were selected as study subjects. The disease occurrence and mental workload were investigated using China Musculoskeletal Disorders Questionnaire and Subjective Workload Assessment Technique. The influencing factors of WMSDs were analyzed by multivariate logistic regression. RESULTS: The total prevalence of WMSDs was 58.9%(268/455) among dentists. The top three body parts of WMSDs were neck(41.5%), shoulder(33.6%) and lower back(28.1%). The median of mental workload score was 58. Multivariate logistic regression analysis results indicated that female dentists showed a higher risk than male dentists(P<0.01) after excluding the influence of confounding factors. The higher the length of service, the higher their risk for WMSDs(P<0.01). Dentists who hold their heads sideways for long time, bent frequently, and use vibrating tools had relatively high risks of developing WMSDs(P<0.01). Dentists who use armchairs had a relatively low risk of WMSDs(P<0.01). There was no correlation between the mental workload and the prevalence of WMSDs in dentists(P>0.05). CONCLUSION: The prevalence of WMSDs among dentists is high. Individual factors, awkward posture and using vibrating tools are risk factors of WMSDs among dentists.Armchair use can help reduce the risk of WMSDs.

Association of lower extremity work-related musculoskeletal disorders and types of working among manufacturing workers / 中国职业医学

OBJECTIVE: To investigate the prevalence of lower extremity work-related musculoskeletal disorders(WMSDs) among manufacturing workers, and to explore the association of lower extremity WMSDs and different types of working. METHODS: A total of 7 908 workers were selected as study subjects from four manufacturing factories in China using the cluster sampling method. The Musculoskeletal Disorders Investigating Questionnaire was adopted to investigate the prevalence of lower extremity WMSDs and the distribution of types of working. The prevalence ratio(PR) of WMSDs, calculated by log-binomial model, was used to estimate the correlation of WMSDs in different parts of lower extremity. The multi-factor logistic regression was used to analyze the association of lower extremity WMSDs and different types of working. RESULTS: The total annual prevalence of lower extremity WMSDs was 41.0%(3 241/7 908) among manufacturing workers. The annual prevalence of WMSDs of different parts in lower extremity from high to low were knee(29.5%), ankle/foot(23.9%) and hip/thigh(16.7%). The correlation of WMSDs of the three parts in lower extremity was close, and the range of PR values was 2.21-3.88. The result of logistic regression analysis showed that the workers who frequently sat for long periods had higher risk of lower extremity WMSDs than those who never/rarely sat for long periods(odds ratio=1.39, P<0.01). The higher the frequency of standing, kneeling/squatting for long periods, carrying heavy loads ≥5 kg and driving, the higher the risk of lower extremity WMSDs(the odds ratios were 1.33, 1.41, 1.16 and 1.12, respectively, P<0.01). CONCLUSION: The prevalence of lower extremity WMSDs was relatively high among manufacturing workers. There is a dose-effect relationship between the types of working and lower extremity WMSDs.

Cervical musculoskeletal disorders and their relationships with personal and work-related factors among electronic assembly workers.

INTRODUCTION: Electronics assembly workers are reported to have a high prevalence of musculoskeletal disorders (MSDs). This study investigated the prevalence of cervical MSDs and the complex relationships between cervical MSDs and individual, physical, psychosocial factors among electronics assembly workers. METHODS: In this cross-sectional survey, self-administered questionnaires from 700 workers in electronics manufacturing workshops were analysed. Information concerning musculoskeletal symptoms, personal and work-related factors was collected. Finally, the prevalence of cervical MSDs was computed for different subgroups, and the relationships with different factors were analyzed using logistic regression and structural equation modeling (SEM). RESULTS: The total 12 month prevalence of cervical MSDs among the survey population was 29.4%. Variables of gender, job tenure, twisting head frequently, neck flexion/extension for long time and work required to be done quickly showed significant associations with MSDs in a multivariate logistic regression (P < 0.05). The SEM analysis showed moderate and significant correlations between postural load (γ = 0.279), gender (γ = 0.233) and cervical MSDs, while there were weak but significant correlations between vibration (γ = 0.024), work stress (γ = 0.126), job tenure (γ = 0.024) and cervical MSDs. Both work stress and vibration affected the MSDs indirectly through postural load. CONCLUSIONS: The logistic regression results support previous general epidemiological MSD studies, and indicates that individual, physical, and psychosocial factors are related to cervical MSDs. The SEM provides a better approximation of the complexity of the relationship between risk factors and cervical MSDs. Improving awkward postures may be effective ways to control the influence of occupational stressors or vibration on MSDs. Practical Applications: The study is to improve prevention of MSDs among electronics assembly workers and promote their occupational health.