Class III treatment with mini-implants anchorage in young adult patients: short and long-term results.

INTRODUCTION: Class III malocclusion should be intercepted and treated at early age, to prevent the necessity of future complex and expensive procedures. The orthopedic facemask therapy has the goal to achieve skeletal changes, minimizing side effects on dentition. The use of skeletal anchorage, combined with Alternate Rapid Maxillary Expansion and Constriction (Alt-RAMEC) protocol, may be effective in treating a greater number of growing Class III patients. OBJECTIVE: To summarize the existing evidence-based literature on Class III malocclusion treatment in young adult patients, and to illustrate its application and effectiveness, by presenting an emblematic case report. CONCLUSION: The resolution of the present case, its long-term follow up, along with the studies conducted on a larger sample, demonstrate the effectiveness of the strategic combination of orthopedic and orthodontic treatments by using an hybrid rapid palatal expander and Alt-RAMEC protocol for treating Class III malocclusions in adult patients.

Class III treatment with mini-implants anchorage in young adult patients: short and long-term results

ABSTRACT Introduction: Class III malocclusion should be intercepted and treated at early age, to prevent the necessity of future complex and expensive procedures. The orthopedic facemask therapy has the goal to achieve skeletal changes, minimizing side effects on dentition. The use of skeletal anchorage, combined with Alternate Rapid Maxillary Expansion and Constriction (Alt-RAMEC) protocol, may be effective in treating a greater number of growing Class III patients. Objective: To summarize the existing evidence-based literature on Class III malocclusion treatment in young adult patients, and to illustrate its application and effectiveness, by presenting an emblematic case report. Conclusion: The resolution of the present case, its long-term follow up, along with the studies conducted on a larger sample, demonstrate the effectiveness of the strategic combination of orthopedic and orthodontic treatments by using an hybrid rapid palatal expander and Alt-RAMEC protocol for treating Class III malocclusions in adult patients.

RESUMO Introdução: A má oclusão de Classe III deve ser interceptada e tratada em idade precoce, a fim de evitar uma futura necessidade de procedimentos complexos e invasivos. O tratamento com máscara facial ortopédica tem o objetivo de obter alterações esqueléticas, minimizando os efeitos colaterais na dentição. O uso de ancoragem óssea em mini-implantes, associada ao protocolo Alt-RAMEC (Alternate Rapid Maxillary Expansion and Constriction) pode ser eficaz no tratamento de um grande número de pacientes Classe III em crescimento. Objetivo: Realizar uma síntese da literatura baseada em evidência sobre o tratamento da má oclusão de Classe III em pacientes adultos jovens, e ilustrar sua aplicação e eficácia por meio do relato de um caso emblemático. Conclusão: A resolução e o acompanhamento em longo prazo do caso apresentado, juntamente com estudos conduzidos em uma amostra maior, demonstram a eficácia da combinação estratégica dos tratamentos ortopédico e ortodôntico usando um expansor palatal híbrido e o protocolo Alt-RAMEC para corrigir a má oclusão de Classe III em pacientes adultos.

Obstructive sleep apnoea syndrome and anatomical factors: possible correlations.

Objectives: The following retrospective study was devised with the aim of evaluating the correlation between OSAS and various anatomical factors. Material and Methods: Thirty-seven patients over the age of 40 were analyzed, of which 19 were classified as OSAS cases and 18 as control cases. For each, 17 anatomical variables were identified and examined using Invivo Dental software on CBCT scans, WebCeph software on laterolateral teleradiographs, and Rhinoceros 6.0 software on dental casts. Results: A generalized linear model of all the anatomical factors identified only two statistically significant variables. Specifically, the total volume of the palate displayed a inverse correlation with OSAS, while the distance between the S point and the Go point (S-Go) exhibited a direct correlation with the disease. Conclusion: The likelihood of an individual having OSAS appears to decrease as the volume of the palate increases but increase as the lingual measure S-Go increases.

Long-term skeletal and dentoalveolar effects of hybrid rapid maxillary expansion and facemask treatment in growing skeletal Class III patients: a retrospective follow-up study.

BACKGROUND: Regardless of the treatment protocol, stability in Class III patients always represents a major concern. The aim of this study was to assess the short and long-term skeletal and dentoalveolar modifications in a group of class III patients treated with hybrid rapid maxillary expander (RME) and facemask (FM). Indeed, no long-term studies have been conducted yet with the objective of evaluating the effects of this kind of approach when applied to patients who have already gone thought their peak of growth. MATERIAL AND METHODS: 27 patients with skeletal Class III malocclusion were treated using hybrid RME according to alternating rapid maxillary expansion and constriction (ALT-RAMEC) protocol, followed by 4 months of facemask therapy. After the orthopaedic phase, each patient underwent orthodontic treatment with fixed multibracket appliances. A mean follow-up of 7 years, 10 months was performed. Pre-treatment (TO), post-treatment (T1) and follow up (T2) cephalometric tracing were analysed, comparing dental and skeletal measurements. RESULTS: Point A advanced by a mean of 3.5 mm with respect to VerT, then relapsed by 0.7 in the post-facemask period, thereby yielding of a mean advancement of 2.7 at T2. The sagittal relationship significantly changed after RME + facemask protraction (3.8° of ANB and 5.189 mm of Wits). Although both Wits and ANB values worsened over time, the improvement from T0 is still appreciable at T2. CONCLUSION: Despite the physiological relapse due to mandibular growth, the long-term cephalometric follow-up confirms the maintenance of all positive outcomes of the previous orthopaedic treatment with hybrid RME and facemask.

MAPA-cision: A New Regenerative Technique for Periodontally Facilitated Orthodontic Treatment. A Case Series.

MAPA-cision, named after those who first introduced the method, is a novel simplified regenerative technique for periodontal-orthodontic cases that can be used in all circumstances where bone thickening is required. It is an innovative, minimally invasive piezoelectric surgical procedure designed to facilitate orthodontic tooth movement while simultaneously increasing bone thickness with guided bone regeneration principles. A new regenerative device consisting of a resorbable collagen membrane with filling materials (a "bone bundle" or "small sausage") is inserted through a tunneling procedure to increase the bone envelope width by allowing the teeth to move within an enhanced periodontal support.

[Orthodontic correction of malpositioned teeth before restorative treatment: efficiency improvement using Temporary Anchorage Devices (TADs)]. / Déplacements orthodontiques pré-prothétiques : vers une meilleure efficacité en utilisant des ancrages osseux temporaires (TADs).

INTRODUCTION: Orthodontic treatment is a fundamental tool when approaching in a multidisciplinary manner a prosthetic rehabilitation, thanks to the possibility to place in an ideal position the involved teeth and to improve or even correct any periodontal defects. Several orthodontic tricks and version have been developed to limit as much as possible orthodontic appliances extension and treatment duration. However, it is not always easy to control teeth movements and manage anchorage when only few teeth are involved. Furthermore, treatment duration can increase due to the need to apply light forces and to correct adverse dental movements that eventually could appear. MATERIAL AND METHODS: Different clinical cases are presented. RESULTS: These exemples illustrate how, with the addition of the TADs in clinical practice, the biomechanics of the multidisciplinary treatment can be simplified, the result becomes highly predictable and the treatment time can often be reduced.

Comparison between direct vs indirect anchorage in two miniscrew-supported distalizing devices.

OBJECTIVE: To compare two distalizing devices supported by palatal miniscrews, the MGBM System (MGBM) and the Distal Screw appliance (DS), in dental Class II patients. MATERIALS AND METHODS: Pretreatment (T1) and postdistalization (T2) lateral cephalograms of 53 Class II malocclusion subjects were examined. MGBM consisted of 29 patients (16 males, 13 females) with a mean pretreatment age of 12.3 ± 1.5 years; DS consisted of 24 patients (11 males, 13 females) with a mean pretreatment age of 11.3 ± 1.2 years. The mean distalization time was 6 ± 2 months for MGBM and 9 ± 2 months for DS. Initial and final measurements and treatment changes were compared by means of a Student's t-test. RESULTS: Maxillary superimpositions showed that the maxillary first molar distalized an average of 5.5 mm in the MGBM and 3.2 mm in the DS between T1 and T2; distal molar tipping was greater in the MGBM (10.3°) than in the DS (3.0°). First premolar showed a mean mesial movement of 1.4 mm, with a mesial tipping of 4.4° in the MGBM; on the contrary, first premolar showed a distal movement of 2.2 mm, with a distal tipping of 6.2°, in the DS. CONCLUSIONS: The MGBM system resulted in greater distal molar movement and less treatment time, resulting in more efficient movement than was associated with the DS; DS showed less molar tipping during distalization.

Maxillary molar distalization with MGBM-system in class II malocclusion.

AIMS: Objective of this retrospective study was to evaluate the treatment effects of the MGBM-System (G.B Maino, A. Giannelly, R. Bernard, P. Mura), a new intraoral device to treat Class II malocclusions. MATERIALS AND METHODS: A retrospective study was conducted to compare the pre-distalization and post-distalization cephalograms and dental model casts of 30 patients (15 male, 15 female) with Class II malocclusion treated with MGBM-System. Mean age at the beginning of treatment was 13.3 years (standard deviation 3.3). Angular, horizontal and vertical measurements were recorded to monitor skeletal and dental-alveolar changes. Molar movements in horizontal plane were monitored by making dental measurements on dental model casts. RESULTS: The MGBM-System produced a rapid molar distalization and Class II relationship was corrected in 8 months ± 2.05, on average. The maxillary first molars were distalized of 4.14 (PTV-6 cemento-enamel junction), associated with a significant distal axis incline of 10. 5° referred to SN and a significant intrusion of 1.3 mm (PP). As for anchorage loss, the first premolar exhibited a significant mesial movement of 0.86 mm, associated with a significant mesial axis incline of 2.46°. No significative changes in either sagittal or vertical skeletal relationship were observed. CONCLUSION: The results suggest that the MGBM-System is an efficient and reliable device for distalizing the maxillary permanent first and second molars.

MGBM system: new protocol for Class II non extraction treatment without cooperation.

This article describes a method to treat Class II malocclusions with no patient cooperation. The technique involves converting the Class II molar relationship to a Class I in the initial phase of treatment by moving the maxillary molars distally with superelastic coils and wire. Anchorage is provided by a transpalatal bar attached to the first premolars and connected to 2 palatal miniscrews. Once the molars are positioned correctly, the palatal miniscrews are removed and miniscrews are inserted bilaterally in the buccal bone between the first molar and the second premolar. These miniscrews serve as the anchorage for the retraction of the premolars, canines and incisors.

Spider Screw: skeletal anchorage system.

The stability of the anchorage unit plays a very important role in orthodontic control. Controlled orthodontic movements such as retraction and/or protraction of teeth and intrusion of overerupted teeth are very difficult to achieve without patient cooperation and without causing undesirable reciprocal movement in the anchorage unit. The article describes characteristics, surgical procedure, and clinical use of the Spider Screw as an ideal non-dental and non-cooperation based anchorage system. The Spider Screws are self-tapping, titanium mini-screws with immediate loading capability. Their utilization involves a simple biomechanical principle combined with the utilization of minimum orthodontic mechanotherapy. Ideal orthodontic forces (in the range from 50 to 250 gr) can be applied to achieve the desired orthodontic movements. Complete osteointegration is neither expected nor desired with this anchorage system. The Spider Screw anchorage system can be used to support a variety of orthodontic movements specifically in clinical situations involving incomplete dental arches and limited cooperation as in many adult orthodontic cases. The ease of surgical placement combined with the reduced dimension of the Spider Screw diameter equally permits its use in clinical situations where anchorage recovery is necessary during treatment of complete dentitions in classical orthodontic therapy.