ABSTRACT
Nowadays, choosing a corrosion inhibitor is not only based on efficiency, but must also consider the toxicity of the compound, the impact on the environment, and, obviously, the regulations in the field. In the last two decades, a special class of substances has begun to be studied, namely polyoxometalates (POMs). Their electronic properties and redox characteristics make the polyoxometalates potential candidates to be used in many electrochemical processes, and as potential corrosion inhibitors. Electrochemical methods such as a Tafel extrapolation plot, chronopotentiometry, or gravimetry have been used to establish the capacity of corrosion inhibition of S235 and SS304 steels in the presence of phosphovanadomolibdate acid (@PMoV) and phosphovanadotungstate acid (@PWV) in 0.5 M sulphuric acid solution. The inhibition efficiency for S235 steel is about 90.6% for @PMoV, and 69.5% for @PWV after 24 h of immersion. In the case of SS304 steel, polyoxometalates have similar effects: the inhibition degree, as a function of Flade potential, is 4.66 for @PMoV; better than 3.26 for @PWV, with both proving the passivant effect.
ABSTRACT
A composite based on calcium sulphate hemihydrate enhanced with Zn- or B-doped hydroxyapatite nanoparticles was fabricated and evaluated for bone graft applications. The investigations of their structural and morphological properties were performed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) spectroscopy techniques. To study the bioactive properties of the obtained composites, soaking tests in simulated body fluid (SBF) were performed. The results showed that the addition of 2% Zn results in an increase of 2.27% in crystallinity, while the addition of boron causes an increase of 5.61% compared to the undoped HAp sample. The crystallite size was found to be 10.69 ± 1.59 nm for HAp@B, and in the case of HAp@Zn, the size reaches 16.63 ± 1.83 nm, compared to HAp, whose crystallite size value was 19.44 ± 3.13 nm. The mechanical resistance of the samples doped with zinc was the highest and decreased by about 6% after immersion in SBF. Mixing HAp nanoparticles with gypsum improved cell viability compared to HAp for all concentrations (except for 200 µg/mL). Cell density decreased with increasing nanoparticle concentration, compared to gypsum, where the cell density was not significantly affected. The degree of cellular differentiation of osteoblast-type cells was more accentuated in the case of samples treated with G+HAp@B nanoparticles compared to HAp@B. Cell viability in these samples decreased inversely proportionally to the concentration of administered nanoparticles. From the point of view of cell density, this confirmed the quantitative data.
