Terahertz photodiode integration with multi-octave-bandwidth dielectric rod waveguide probe.

Photonic integrated circuits play a vital role in enabling terahertz (THz) applications that require multi-octave bandwidth. Prior research has been limited in bandwidth due to rectangular waveguide (WRs) interconnects, which can only support single octave at low loss. To overcome this fundamental limitation, we exploit the ultra-wideband (UWB) near-field coupling between planar waveguides and silicon (Si)-based subwavelength dielectric rod waveguides (DRWs) to interconnect THz bandwidth uni-traveling-carrier photodiodes (UTC-PDs) at 0.08-1.03 THz. In a proof-of-concept experiment, the on-chip integrated UTC-PDs demonstrate a UWB operation from 0.1 THz to 0.4 THz. Furthermore, by employing Si DRWs as probes, multi-octave device-under-test characterization of UTC-PDs integrated with UWB transition is enabled with only one DRW probe. The proposed UWB interconnect technology is distinct from previously used WR-based ground-signal-ground probes or quasi-optical free-space coupling since it can provide multi-octave bandwidth and enable on-chip THz circuit integration.

High saturation photocurrent THz waveguide-type MUTC-photodiodes reaching mW output power within the WR3.4 band.

In this paper, we report on waveguide-type modified uni-traveling-carrier photodiodes (MUTC-PDs) providing a record high output power level for non-resonant photodiodes in the WR3.4 band. Indium phosphide (InP) based waveguide-type 1.55 µm MUTC-PDs have been fabricated and characterized thoroughly. Maximum output powers of -0.6 dBm and -2.7 dBm were achieved at 240 GHz and 280 GHz, respectively. This has been accomplished by an optimized layer structure and doping profile design that takes transient carrier dynamics into account. An energy-balance model has been developed to study and optimize carrier transport at high optical input intensities. The advantageous THz capabilities of the optimized MUTC layer structure are confirmed by experiments revealing a transit time limited cutoff frequency of 249 GHz and a saturation photocurrent beyond 20 mA in the WR3.4 band. The responsivity for a 16 µm long waveguide-type THz MUTC-PD is found to be 0.25 A/W. In addition, bow-tie antenna integrated waveguide-type MUTC-PDs are fabricated and reported to operate up to 0.7 THz above a received power of -40 dBm.

High-power UTC-photodiodes for an optically pumped subharmonic terahertz receiver.

In this work, we present an optically subharmonic pumped WR3-mixer for enabling photonic coherent frequency-domain terahertz (THz) imaging and spectroscopy systems in the future. The studied mixer operates within the upper range of the WR3-band from 270 GHz to 320 GHz. High-power uni-travelling carrier photodiodes (UTC-PDs) are developed for providing the subharmonic local oscillator (LO) signal within the corresponding WR6-band in the range between 135 GHz and 160 GHz. The proposed THz mixer module consists of a gallium arsenide (GaAs)-based low barrier Schottky diodes (LBSDs) chip and an indium phosphide (InP)-based UTC-PD chip. For integrating the UTC-PD with the WR6 at the mixer's LO input, an E-plane transition and a stepped-impedance microstrip line low pass filter (MSL-LPF) are developed and monolithically integrated with the UTC-PD chip on a 100 µm thick InP substrate. The E-plane transition converts the quasi-TEM mode of the grounded coplanar waveguide (GCPW) to the dominant TE10 mode of the WR6 and matches the GCPW's impedance with the WR6's impedance. According to full-wave EM simulations, the transition exhibits a 1 dB bandwidth (BW) of more than 30 GHz (138.8-172.1 GHz) with a corresponding return loss (RL) better than 10 dB, whereas the minimum insertion loss (IL) is 0.65 dB at a frequency of 150 GHz. Experimentally, the 1 dB BW of the fabricated transition is found to be between 140 GHz and 170 GHz, which confirms the numerical results. The minimum measured IL is 2.94 dB, i.e., about 2 dB larger than the simulated value. In order to achieve the required LO power for successfully pumping the mixer in a direct approach (i.e., without an additional LO amplifier), the design of the epitaxial system of the UTC-PD is optimized to provide a high output power within the WR6-band (110-170 GHz). Experimentally, at 150 GHz, the output power of the fabricated UTC-PD chip is measured to be +3.38 dBm at a photocurrent of 21 mA. To our knowledge, this is the highest output power ever achieved from a UTC-PD at 150 GHz. Finally, the developed high-power UTC-PDs are used as LO source to pump the subharmonic WR3-mixer. Experimentally, the conversion loss (CL) is determined in dependency of the LO power levels within the RF frequency range between 271 GHz and 321 GHz for a fixed IF at 1 GHz. The achieved results have revealed an inverse relation between the CL and LO power level, where the average minimum CL of 16.8 dB is achieved at the highest applied LO power level, corresponding to a photocurrent of 10 mA. This CL figure is promising and is expected to reach the CL of electronically pumped and commercially available THz mixers (∼12 dB) after packaging the LO source with the mixer. Furthermore, an average CL of 17.2 dB is measured at a fixed LO frequency of 150 GHz and a tuned RF frequency between 301 GHz and 310 GHz, i.e., IF between 1 GHz and 10 GHz.

Photonic-assisted 2-D terahertz beam steering enabled by a LWA array monolithically integrated with a BFN.

A novel photonic-assisted 2-D Terahertz beam steering chip using only two tuning elements is presented. The chip is based on an array of three leaky wave antennas (LWAs) with a monolithically integrated beamforming network (BFN) on a 50 µm-thick indium phosphide substrate. The THz beam angle in elevation (E-plane) is controlled via optical frequency tuning using a tunable dual-wavelength laser. An optical delay line is used for azimuth (H-plane) beam control. The simulated beam scanning range is 92° in elevation for a frequency sweep from 0.23 THz to 0.33 THz and 69.18° in azimuth for a time delay of 3.6 ps. For the frequency range from 0.26 THz to 0.32 THz, it is confirmed experimentally that the THz beam scans from -12° to +33°, which is in good agreement with the numerical simulations. The beam direction in azimuth scans with a total angle of 39° when applying a delay difference of 1.68 ps. A good agreement is found between theoretically predicted and experimentally determined THz beam angles with a maximum angle deviation below 5°. The experimental scanning angles are limited due to the mechanical constraints of the on-wafer probes, the on-chip integrated transition and the bandwidth of the THz receiver LNA. The mechanical limitation will be overcome when using a packaged chip.