Structural, functional, and biological properties of potato peel oligosaccharides.

Enzymatic hydrolysis of water-soluble polysaccharides from potato peel waste (PPPW) generates low molecular weight oligosaccharides with a yield of 63%. The oligosaccharides generated from potato peel polysaccharides (OPPP) were purified by Superdex-30 column. The results showed the presence of 8 peaks (OPPP1-OPPP8). The identification of all the fractions by chromatography analysis (GC-FID) illustrated that the most prominent residues were glucose with traces of galactose, arabinose and rhamnose. Finally, mass spectrometry (MALDI-ToF-ToF) analysis showed that the generated oligosaccharides were heterogeneous and contained different degree of polymerization (DP). Indeed, the obtained oligosaccharides fractions OPPP3, OPPP4, OPPP5, OPPP6 and OPPP7 were compose of the following degree of polymerization DP5; DP4; DP2; DP1 and DP1, respectively. Potato peel oligosaccharides (OPPP) efficiency were tested using different concentrations in functional properties. The results showed good foaming and emulsion properties. This study also aimed to investigate the antioxidant activity of OPPP. The items explored included the DPPH radical-scavenging capacity (IC50 OPPP=2.5mg/mL), reducing power (OD: 0.622±0.032 at a concentration of 20mg/mL), ß-carotene bleaching inhibition activity (45.335±3.653%), and also the ABTS radical scavenging activity (14.835±0.1%).These findings indicate that potato peel oligosaccharides have potent antioxidant activities. Hence, one can suggest that these oligosaccharides might contribute as additives in food, pharmaceutical and cosmetic preparations.

Evaluation of dough rheological properties and bread texture of pearl millet-wheat flour mix.

This study was undertaken with the objective of formulating composite bread using pearl millet (Pennisetum glaucum) and wheat (Triticum aestivum) flours . Rheological and bread making properties of composite flours were evaluated. Mixolab results revealed torque increased and dough stability time decreased upon incorporation of pearl millet flour in wheat flour. The incorporation of millet flour at optimum level (5 %) led to an increase of the dough strength (W) and the elasticity-to-extensibility ratio (P/L) by 31 % and 65 % respectively. The bread texture and volume were also improved. These findings indicated the potentiality of using millet flour in bread making.

Multistage process for the production of bioethanol from almond shell.

This work describes the feasibility of using almond shell as feedstock for bioethanol production. A pre-treatment step was carried out using 4% NaOH for 60min at 121°C followed by 1% sulfuric acid for 60min at 121°C. Enzymatic saccharification of the pre-treated almond shell was performed using Penicillium occitanis enzymes. The process was optimized using a hybrid design with four parameters including the incubation time, temperature, enzyme loads, and polyethylene glycol (PEG) concentration. The optimum hydrolysis conditions led to a sugar yield of 13.5%. A detoxification step of the enzymatic hydrolysate was carried out at pH 5 using 1U/ml of laccase enzyme produced by Polyporus ciliatus. Fermenting efficiency of the hydrolysates was greatly improved by laccase treatment, increasing the ethanol yield from 30% to 84%. These results demonstrated the efficiency of using almond shell as a promising source for bioethanol production.

Structural, functional, and antioxidant properties of water-soluble polysaccharides from potatoes peels.

Water-soluble polysaccharides were extracted from potato peel waste (PPW). The structure of the polysaccharides from PPW (PPPW) was examined by means of Fourier transform-infrared spectroscopy (FT-IR) analysis, X-ray diffractometry (XRD) and gas chromatography-mass spectrometry (GC-MS). The results suggest that the extracted polysaccharides form a semi-crystalline polymer constituted essentially of the functional groups CO, CH and OH. Acid hydrolysis of this polymer yielded glucose (76.25%) as the dominant sugar functional properties (water holding capacity: WHC, oil holding capacity: OHC, foaming, and emulsion properties) of this polymer were studied. The PPPW showed interesting water-holding and fat-binding capacities which were 4.097 ± 0.537 g/g and 4.398 ± 0.04 g/g, respectively. In addition, it presented good foaming and emulsion properties. The antioxidant activity of this polymer was also studied and revealed that the polysaccharides showed interesting 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging capacity (IC50 PPPW=11.578 mg/mL), reducing power and ß-carotene bleaching inhibition activities, and also a strong ABTS radical scavenging activity (IC50 PPPW=2mg/mL). Overall, the results suggest that the polysaccharide is a promising source of natural antioxidants and can be used as additive in food, pharmaceutical and cosmetic preparations.

Co-exposure to aluminum and acrylamide disturbs expression of metallothionein, proinflammatory cytokines and induces genotoxicity: Biochemical and histopathological changes in the kidney of adult rats.

The individual toxic effects of aluminum and acrylamide are known but there is no data on their combined effects. The present study investigates the toxic effects after combined exposure to these toxicants on: (i) oxidative stress during combined chronic exposure to aluminum and acrylamide on kidney function (ii) correlation of oxidative stress with metallothionein (MT) and inflammatory cytokines expression, DNA damage, and histopathological changes. Rats were exposed to aluminum (50 mg/kg body weight) in drinking water and acrylamide (20 mg/kg body weight) by gavage either individually or in combination for 3 weeks. Exposure rats to aluminum chloride or acrylamide alone and in combination induced nephrotoxicity, as evidenced by a decrease in the 24-h urine volume and uric acid levels in plasma and an increase of plasma creatinine, urea, and blood urea nitrogen levels. Nephrotoxicity was objectified by a significant increase in malondialdehyde level, advanced oxidation protein, and protein carbonyl contents, whereas reduced glutathione, nonprotein thiol, vitamin C levels, catalase, and glutathione peroxidase activities showed a significant decline. Superoxide dismutase activity and its gene expression were increased. Aluminum and acrylamide co-exposure exhibited synergism in various biochemical variables and also in DNA damage. Kidney total MT levels and genes expression of MT1, MT2, and proinflammatory cytokines were increased. All these changes were supported by histopathological observations. Co-exposure to aluminum and acrylamide exhibited synergism and more pronounced toxic effects compared with their individual effects based on various biochemical variables, genotoxic, and histopathological changes. © 2015 Wiley Periodicals, Inc. Environ Toxicol 31: 1044-1058, 2016.

Improvement of methyl orange dye biotreatment by a novel isolated strain, Aeromonas veronii GRI, by SPB1 biosurfactant addition.

Aeromonas veronii GRI (KF964486), isolated from acclimated textile effluent after selective enrichment on azo dye, was assessed for methyl orange biodegradation potency. Results suggested the potential of this bacterium for use in effective treatment of azo-dye-contaminated wastewaters under static conditions at neutral and alkaline pH value, characteristic of typical textile effluents. The strain could tolerate higher doses of dyes as it was able to decolorize up to 1000 mg/l. When used as microbial surfactant to enhance methyl orange biodecolorization, Bacillus subtilis SPB1-derived lipopeptide accelerated the decolorization rate and maximized slightly the decolorization efficiency at an optimal concentration of about 0.025%. In order to enhance the process efficiency, a Taguchi design was conducted. Phytotoxicity bioassay using sesame and radish seeds were carried out to assess the biotreatment effectiveness. The bacterium was able to effectively decolorize the azo dye when inoculated with an initial optical density of about 0.5 with 0.25% sucrose, 0.125% yeast extract, 0.01% SPB1 biosurfactant, and when conducting an agitation phase of about 24 h after static incubation. Germination potency showed an increase toward the nonoptimized conditions indicating an improvement of the biotreatment. When comparing with synthetic surfactants, a drastic decrease and an inhibition of orange methyl decolorization were observed in the presence of CTAB and SDS. The nonionic surfactant Tween 80 had a positive effect on methyl orange biodecolorization. Also, studies ensured that methyl orange removal by this strain could be due to endocellular enzymatic activities. To conclude, the addition of SPB1 bioemulsifier reduced energy costs by reducing effective decolorization period, biosurfactant stimulated bacterial decolorization method may provide highly efficient, inexpensive, and time-saving procedure in treatment of textile effluents.

Isolation and characterization of starch from industrial fresh pasta by-product and its potential use in sugar-snap cookie making.

In this paper, starch was extracted from fresh pasta by-product (PS) and its chemical composition and physical and microscopic characteristics were determined. Commercial wheat starch (CS) was used as reference. In general, purity was similar between starches studied. However, others compounds such as protein, lipid and ash were significantly different. PS starch granules had large lenticular-shape (25-33 µm) and small spherical-shape (5-8 µm). The pH and color of PS starch were similar to those reported for CS starch. On the other hand, PS had higher water absorption capacity, viscosity and cooking stability than CS. The gelatinization temperature of PS was similar to that of CS (60 and 61 °C). At high temperature (90 °C) both starches had similar rheological behavior. The results achieved suggest that PS starch has potential for application in food systems requiring high processing temperatures such the manufacture of sugar snap cookie. The effects of PS starch addition on the dough making stage and the final cookie quality were analyzed. Improvements in dough cohesiveness (24 %) and springiness (10 %) were significant relative to those of CS dough. Texture profile analysis confirmed the rheological changes.

Biodegradation of diesel oil by a novel microbial consortium: comparison between co-inoculation with biosurfactant-producing strain and exogenously added biosurfactants.

Bioremediation, involving the use of microorganisms to detoxify or remove pollutants, is the most interesting strategy for hydrocarbon remediation. In this aim, four hydrocarbon-degrading bacteria were isolated from oil-contaminated soil in Tunisia. They were identified by the 16S rDNA sequence analysis, as Lysinibacillus bronitolerans RI18 (KF964487), Bacillus thuringiensis RI16 (KM111604), Bacillus weihenstephanensis RI12 (KM094930), and Acinetobacter radioresistens RI7 (KJ829530). Moreover, a lipopeptide biosurfactant produced by Bacillus subtilis SPB1, confirmed to increase diesel solubility, was tested to increase diesel biodegradation along with co-inoculation with two biosurfactant-producing strains. Culture studies revealed the enhancement of diesel biodegradation by the selected consortium with the addition of SPB1 lipopeptide and in the cases of co-inoculation by biosurfactant-producing strain. In fact, an improvement of about 38.42 and 49.65 % of diesel degradation was registered in the presence of 0.1 % lipopeptide biosurfactant and when culturing B. subtilis SPB1 strain with the isolated consortium, respectively. Furthermore, the best improvement, evaluated to about 55.4 %, was recorded when using the consortium cultured with B. subtilis SPB1 and A. radioresistens RI7 strains. Gas chromatography analyses were correlated with the gravimetric evaluation of the residual hydrocarbons. Results suggested the potential applicability of the selected consortium along with the ex situ- and in situ-added biosurfactant for the effective bioremediation of diesel-contaminated water and soil.

Disruption of erythrocyte antioxidant defense system, hematological parameters, induction of pro-inflammatory cytokines and DNA damage in liver of co-exposed rats to aluminium and acrylamide.

The individual toxic effects of aluminium and acrylamide are well known but there are no data on their combined effects. The present study was undertaken to determine (i) hematological parameters during individual and combined chronic exposure to aluminium and acrylamide (ii) correlation of oxidative stress in erythrocytes with pro-inflammatory cytokines expression, DNA damage and histopathological changes in the liver. Rats were exposed to aluminium (50 mg/kg body weight) in drinking water and acrylamide (20 mg/kg body weight) by gavage, either individually or in combination for 3 weeks. Exposure rats to AlCl3 or/and ACR provoked an increase in MDA, AOPP, H2O2 and a decrease in GSH and NPSH levels in erythrocytes. Activities of catalase, glutathione peroxidase and superoxide dismutase were decreased in all treated rats. Our results showed that all treatments induced an increase in WBC, erythrocyte osmotic fragility and a decrease in RBC, Hb and Ht. While MCV, MCH, MCHC remained unchanged. Hepatic pro-inflammatory cytokines expression including tumor necrosis factor-α, interleukin-6, interleukin-1ß was increased suggesting leucocytes infiltration in the liver. A random DNA degradation was observed on agarose gel only in the liver of co-exposed rats to AlCl3 and ACR treatment. Interestingly, co-exposure to these toxicants exhibited synergism based on physical and biochemical variables in erythrocytes, pro-inflammatory cytokines and DNA damage in liver.

A new raw-starch-digesting α-amylase: production under solid-state fermentation on crude millet and biochemical characterization.

A new Bacillus strain degrading starch, named Bacillus sp. UEB-S, was isolated from a southern Tunisian area. Amylase production using solid-state fermentation on millet, an inexpensive and available agro-resource, was investigated. Response surface methodology was applied to establish the relationship between enzyme production and four variables: inoculum size, moisture-to-millet ratio, temperature, and fermentation duration. The maximum enzyme activity recovered was 680 U/g of dry substrate when using 1.38 × 10(9) CFU/g as inoculation level, 5.6:1 (ml/g) as moisture ratio (86%), for 4 days of cultivation at 37 degrees C, which was in perfect agreement with the predicted model value. Amylase was purified by Q-Sepharose anion-exchange and Sephacryl S-200 gel filtration chromatography with a 14-fold increase in specific activity. Its molecular mass was estimated at 130 kDa. The enzyme showed maximal activity at pH 5 and 70 degrees C, and efficiently hydrolyzed starch to yield glucose and maltose as end products. The enzyme proved its efficiency for digesting raw cereal below gelatinization temperature and, hence, its potentiality to be used in industrial processes.

Production of mixed-linkage beta-oligosaccharides from lichenan using immobilized Bacillus licheniformis UEB CF lichenase.

Lichenase from Bacillus licheniformis UEB CF was immobilized on Amberlite IR120 H. The immobilization yield and lichenase activity were 87 and 92.81 % of initial activity, respectively. The immobilized enzyme exhibited a shift in the optimal pH from 5.0 to 3.0, but the activity optimal temperature was not affected. The immobilized enzyme showed a residual activity of 50 % after five uses. It also exhibited high storage stability and retained 50 % of its initial activity after 120 days at 4 °C. The main hydrolysis products yielded from lichenan were trisaccharide and tetrasaccharide. The resulting mixed-linkage beta-oligosaccharides could be used as a special nutriment for lactic bacteria.

Investigation of antimicrobial activity and statistical optimization of Bacillus subtilis SPB1 biosurfactant production in solid-state fermentation.

During the last years, several applications of biosurfactants with medical purposes have been reported. Biosurfactants are considered relevant molecules for applications in combating many diseases. However, their use is currently extremely limited due to their high cost in relation to that of chemical surfactants. Use of inexpensive substrates can drastically decrease its production cost. Here, twelve solid substrates were screened for the production of Bacillus subtilis SPB1 biosurfactant and the maximum yield was found with millet. A Plackett-Burman design was then used to evaluate the effects of five variables (temperature, moisture, initial pH, inoculum age, and inoculum size). Statistical analyses showed that temperature, inoculum age, and moisture content had significantly positive effect on SPB1 biosurfactant production. Their values were further optimized using a central composite design and a response surface methodology. The optimal conditions of temperature, inoculum age, and moisture content obtained under the conditions of study were 37°C, 14 h, and 88%, respectively. The evaluation of the antimicrobial activity of this compound was carried out against 11 bacteria and 8 fungi. The results demonstrated that this biosurfactant exhibited an important antimicrobial activity against microorganisms with multidrug-resistant profiles. Its activity was very effective against Staphylococcus aureus, Staphylococcus xylosus, Enterococcus faecalis, Klebsiella pneumonia, and so forth.

New thermostable amylase from Bacillus cohnii US147 with a broad pH applicability.

A new thermophilic bacterial strain identified as Bacillus cohnii US147 was isolated from the southern Tunisian soil. The identification was based on physiological tests and molecular techniques related to the 16S ribosomal ribonucleic acid. The isolated strain produced amylase, which was purified. This amylase had an apparent molecular mass of 30 kDa as estimated by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. Amylase US147 showed K (m) and V (max) values of 0.7 mg/ml and 2.2 U/ml, respectively, with starch as the substrate. The enzyme was active in acid and basic pH and had a maximal activity on starch at pH 9 and 70 degrees C. The enzyme was stable at pH 9 for 72 h and retained half of its activity after incubation at 70 degrees C for 150 min. A partially inhibition (15%, 25%, 23%, 20%, and 22%) was obtained with 1 mM SDS, 1 mM NaBO(3), 1 mM H(2)O(2,) 1 mM Zn(+2), and 5 mM ethylenediamine tetraacetic acid (EDTA), respectively. The amylase recovered its original activity by the addition of 10 mM Ca (2+) to the 5 mM EDTA. These properties indicated a possible use of this amylase in starch saccharification, in detergent, and in other industrial applications.