ABSTRACT
Solubility-selective polymer membranes are promising materials for C3+ hydrocarbons removal from methane and other permanent gas streams. To this end, a dense solubility-selective membrane based on crosslinked poly(tetradecyl methyl siloxane) was synthesized. Sorption of methane, ethane, and n-butane in the polymer was measured in the temperature range of 5-35 °C. An abnormal temperature dependence of sorption was detected, contradicting the generally accepted view of sorption as an exothermic process. In particular, methane shows minimal sorption at 5 °C. The abnormal temperature behavior was found to be related to crystallization of the alkyl side chains at temperatures below ~10 °C. Gas permeability determined by sorption and permeation methods are in reasonable agreement with each other and decrease in the order n-C4H10 > C2H6 > CH4. The solubility of these alkanes changes in the same order indicating that poly(tetradecyl methyl siloxane) is indeed the sorption-selective membrane. The diffusivities and permeabilities of studied alkanes declined with decreasing temperature, whereas the n-C4H10/CH4 permselectivity increases with decreasing temperature, reaching a value of 23 at 5 °C.
ABSTRACT
This work was focused on the mitigation of physical aging in thin-film composite (TFC) membranes (selective layer ~1 µm) based on polymer intrinsic microporosity (PTMSP) by the introduction of both soft, branched polyethyleneimine (PEI), and rigid, porous aromatic framework PAF-11, polymer additives. Self-standing mixed-matrix membranes of thicknesses in the range of 20-30 µm were also prepared with the same polymer and fillers. Based on 450 days of monitoring, it was observed that the neat PTMSP composite membrane underwent a severe decline of its gas transport properties, and the resultant CO2 permeance was 14% (5.2 m3 (STP)/(m2·h·bar)) from the initial value measured for the freshly cast sample (75 m3 (STP)/(m2·h·bar)). The introduction of branched polyethyleneimine followed by its cross-linking allowed to us to improve the TFC performance maintaining CO2 permeance at the level of 30% comparing with day zero. However, the best results were achieved by the combination of porous, rigid and soft, branched polymeric additives that enabled us to preserve the transport characteristics of TFC membrane as 43% (47 m3 (STP)/(m2·h·bar) after 450 days) from its initial values (110 m3 (STP)/(m2·h·bar)). Experimental data were fitted using the Kohlrausch-Williams-Watts function, and the limiting (equilibrium) values of the CO2 and N2 permeances of the TFC membranes were estimated. The limit value of CO2 permeance for neat PTMSP TFC membrane was found to be 5.2 m3 (STP)/(m2·h·bar), while the value of 34 m3(STP)/(m2·h·bar) or 12,600 GPU was achieved for TFC membrane containing 4 wt% cross-linked PEI, and 30 wt% PAF-11. Based on the N2 adsorption isotherms data, it was calculated that the reduction of the free volume was 1.5-3 times higher in neat PTMSP compared to the modified one. Bearing in mind the pronounced mitigation of physical aging by the introduction of both types of fillers, the developed high-performance membranes have great potential as support for the coating of an ultrathin, selective layer for gas separation.
ABSTRACT
An approximate model based on friction-coefficient formalism is developed to predict the mixed-gas permeability and selectivity of polymeric membranes. More specifically, the model is a modification of Kedem's approach to flux coupling. The crucial assumption of the developed model is the division of the inverse local permeability of the mixture component into two terms: the inverse local permeability of the corresponding pure gas and the term proportional to the friction between penetrants. Analytical expressions for permeability and selectivity of polymeric membranes in mixed-gas conditions were obtained within the model. The input parameters for the model are ideal selectivity and solubility coefficients for pure gases. Calculations have shown that, depending on the input parameters and the value of the membrane Peclét number (the measure of coupling), there can be both a reduction and an enhancement of selectivity compared to the ideal selectivity. The deviation between real and ideal selectivity increases at higher Peclét numbers; in the limit of large Peclét numbers, the mixed-gas selectivity tends to the value of the ideal solubility selectivity. The model has been validated using literature data on mixed-gas separation of n-butane/methane and propylene/propane through polymeric membranes.
