Effect of Methacryloyloxydecyl Dihydrogen Phosphate-Containing Silane and Adhesive Used Alone or in Combination on the Bond Strength and Chemical Interaction With Zirconia Ceramics Under Thermal Aging.

CLINICAL RELEVANCE: Achieving durable bonding to zirconia is fundamental for the application of a methacryloyloxydecyl dihydrogen phosphate (MDP)-containing silane solution or an MDP-containing silane solution associated with an MDP-containing universal adhesive. SUMMARY: Objectives: To evaluate the effect of a methacryloyloxydecyl dihydrogen phosphate (MDP)-containing silane coupling agent and universal adhesive, used alone or in combination, on the microshear bond strength (µSBS) to zirconia after 24 hours of water storage (24h) and after 10,000 thermocycles (TC), complemented with chemical analysis of the surface to establish the presence of MDP on the surface of the zirconia after bonding procedures.Methods and Materials: Thirty computer-aided design/computed-aided manufacturing blocks of zirconia were cut into four sections (6×6×6 mm) and sintered. Zirconia sections (n=96) were assigned to 24 groups according to three factors: 1) silane (no silane, Monobond S [MBS], Monobond P [MB+]), 2) adhesive + resin cement (no adhesive + Enforce [ENF], no adhesive + RelyX Ultimate [REX], Prime&Bond Elect + Enforce [PBE/ENF], Scotchbond Universal + RelyX Ultimate [SBU/REX]), and 3) thermocycling (no thermocycling [24h], 10,000 thermocycles [TC]). Upon silane/adhesive application, cylinder-shaped matrices were filled with resin cement and light cured. Specimens were tested in µSBS (1.0 mm/min) after 24h or TC. The µSBS data were analyzed using twoway ANOVA and Tukey's post hoc test (α=0.05). In addition, micro-Raman spectroscopy was used to analyze the zirconia surface for immediate chemical interaction analysis (n=24).Results: For the 24h condition, PBE/ENF resulted in lower mean µSBS than both groups with silane without PBE (MBS and MB+ groups; p<0.001). SBU alone or MB+ alone and MB+ associated with SBU showed the highest mean µSBS (p<0.001). For the TC condition, all groups showed a significant decrease in mean µSBS compared with those of 24h (p<0.001), with the exception of MB+ associated to SBU (p>0.05). However, the application of MB+ alone or MB+ associated to SBU resulted in higher mean µSBS (p<0.001) after TC than the remaining TC groups. In terms of chemical interaction, only the SBU groups, alone or combined with both of the silane agents, were associated with the methacrylate groups after rinsing.Conclusions: The results of the current study support the use of an MDP-containing silane solution or an MDP-containing silane solution associated with an MDP-containing universal adhesive for bonding to air-abraded zirconia, as a more stable bonding after thermocycling.

Two-year Effects of Chlorhexidine-containing Adhesives on the In Vitro Durability of Resin-dentin Interfaces and Modeling of Drug Release.

OBJECTIVES: To evaluate the effects of addition of diacetate chlorhexidine (CHX) at different concentrations into two etch-and-rinse adhesive systems on CHX release, as well as the immediate (IM) and two-year (2-Y) resin-dentin microtensile bond strength (µTBS) and nanoleakage (NL). METHODS: CHX was added to XP Bond (XP) and Ambar (AM) at concentrations of 0.0 wt% (control); 0.01 wt%; 0.05 wt%; and 0.1 to 0.2 wt%. To assess the cumulative CHX release, adhesive disks were made in a metallic matrix and after light-curing were stored in water. Ultraviolet spectrophotometric measurements of the storage solution were performed to examine the release kinetics of CHX. For µTBS and NL, the occlusal enamel of molars was removed and the adhesives were applied to the dentin surface after acid etching. After composite resin build-up, specimens were sectioned to obtain µTBS sticks. The specimens were subjected to µTBS and NL at IM and after 2-Y. In addition, specimens underwent examination for CHX using micro-Raman spectroscopy. All data were submitted to statistical analysis (α=0.05). RESULTS: With regard to CHX release, AM showed a slower and gradual release of CHX while XP released CHX more quickly ( p<0.05), and CHX was still present in the hybrid layers after 2-Y. Both adhesives showed CHX release at 2-Y water storage. Both CHX-containing adhesives showed higher µTBS values than did the control group ( p<0.05).

Mechanical and microbiological properties and drug release modeling of an etch-and-rinse adhesive containing copper nanoparticles.

OBJECTIVES: To evaluate the effect of addition of copper nanoparticles (CN) at different concentrations into a two-step etch-and-rinse (2-ER) adhesive on antimicrobial activity (AMA), copper release (CR), ultimate tensile strength (UTS), degree of conversion (DC), water sorption (WS), solubility (SO), as well as the immediate (IM) and 1-year resin-dentin bond strength (µTBS) and nanoleakage (NL). METHODS: Seven adhesives were formulated according to the addition of CN (0, 0.0075, 0.015, 0.06, 0.1, 0.5 and 1wt%) in adhesive. The AMA was evaluated against Streptococcus mutans using agar diffusion assay. For CR, WS and SO, specimens were constructed and tested for 28 days. For UTS, specimens were tested after 24h and 28 days. For DC, specimens were constructed and tested after 24h by FTIR. After enamel removal, the ER was applied to dentin. After composite resin build-ups, specimens were sectioned to obtain resin-dentin sticks. For µTBS and NL, specimens were tested after 24h and 1-year periods. All data were submitted to statistical analysis (α=0.05). RESULTS: The addition of CN provided AMA to the adhesives at all concentrations. Higher CR was observed in adhesives with higher concentration of CN. UTS, DC, WS and SO were not influenced. For µTBS an increase was observed in 0.1 and 0.5% copper group. For NL, a significant decrease was observed in all groups in comparison with control group. After 1-year, no significant reductions of µTBS and no significant increases of NL were observed for copper containing adhesives compared to the control group. SIGNIFICANCE: The addition of CN in concentrations up to 1wt% in the 2-ER adhesive may be an alternative to provide AMA and preserve the bonding to dentin, without reducing adhesives' mechanical properties evaluated.

Effect of Minocycline on the Durability of Dentin Bonding Produced with Etch-and-Rinse Adhesives.

OBJECTIVES: To evaluate the effect of minocycline and chlorhexidine pretreatment of acid-etched dentin on the longevity of resin-dentin bond strength (µTBS) and nanoleakage of two-step etch-and-rinse adhesives. METHODS: Before application of Prime & Bond NT and Adper Single Bond 2 in occlusal dentin, the dentin surfaces were treated with 37% phosphoric acid, rinsed, air-dried, and rewetted with water (control group), 2% minocycline, or 2% chlorexidine digluconate. Composite buildups were constructed incrementally, and specimens were longitudinally sectioned to obtain bonded sticks (0.8 mm2) to be tested in tension (0.5 mm/min) immediately or after 24 months of water storage. For nanoleakage, two specimens of each tooth/period were immersed in the silver nitrate solution, photo-developed, and polished with SiC paper for analysis under energy-dispersive X-ray spectroscopy/scanning electron microscopy. RESULTS: Reductions of the µTBS and increases in the nanoleakage were observed for both adhesives when the rewetting procedure was performed with water. Stable bonds were observed for the 2% minocycline and 2% chlorexidine digluconate groups after 24 months. CONCLUSIONS: The use of 2% minocycline as pretreatment of acid-etched dentin is one alternative to retard the degradation of resin-dentin interfaces over a 24-month period as well as 2% chlorexidine digluconate.

In vitro longevity of bonding properties of universal adhesives to dentin.

PURPOSE: To evaluate the immediate and 6-month resin-dentin bond strength (µTBS) and nanoleakage (NL) of universal adhesives that contain or do not contain methacryloyloxydecyl dihydrogen phosphate (MDP) and are used in the etch-and-rinse and self-etch strategies. METHODS AND MATERIALS: Forty caries-free extracted third molars were divided into eight groups for µTBS (n=5). The groups were bonded with the Clearfil SE Bond (CSE) and Adper Single Bond 2 (SB) as controls; Peak Universal, self-etch (PkSe) and etch-and rinse (PkEr); Scotchbond Universal Adhesive, self-etch (ScSe) and etch-and-rinse (ScEr); and All Bond Universal, self-etch (AlSe) and etch-and-rinse (AlEr). After composite restorations, specimens were longitudinally sectioned to obtain resin-dentin bonded sticks (0.8 mm(2)). The µTBS of the specimens was tested immediately (IM) or after 6 months of water storage (6M) at 0.5 mm/min. Some sticks at each storage period were immersed in silver nitrate and photo developed, and the NL was evaluated with scanning electron microscopy. Data were analyzed with two-way repeated-measures analysis of variance and Tukey test (α=0.05). RESULTS: At the IM period, PkSe and PkEr showed µTBS similar to the control adhesives (p>0.05) but increased NL pattern and lower µTBS after 6M (p<0.05). ScSe and ScEr showed intermediary µTBS values at the IM period but remained stable after 6 months (p>0.05). AlSe showed the lowest µTBS (p<0.05), but µTBS and NL remained stable after 6M (p>0.05). AlEr showed higher IM µTBS but showed higher degradation after 6M (p<0.05). CONCLUSIONS: Universal adhesives that contain MDP showed higher and more stable µTBS with reduced NL at the interfaces after 6 months of water storage.

Keratocystic odontogenic tumour arising as a periapical lesion.

AIM: To document a case of a keratocystic odontogenic tumour (KOT) involving the apical region in the maxilla mimicking a periapical lesion of endodontic origin. SUMMARY: Benign and malignant tumours, including odontogenic lesions, can be erroneously diagnosed as periapical radiolucencies. KOTs mimicking periapical lesions of endodontic origin are uncommon, especially when the lesions involve the maxilla. This article describes a 55-year-old man with a well-delimited, oval-shaped, radiolucent lesion, occupying the middle and apical third of teeth 22 and 23. After 30 days, the clinical and radiographic findings remained unchanged and the patient was referred for surgical removal of the lesion. Clinical, radiographic and histopathological features are also discussed and compared with current literature.