Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
Add more filters










Database
Language
Publication year range
1.
J Chromatogr A ; 1287: 24-37, 2013 Apr 26.
Article in English | MEDLINE | ID: mdl-23535633

ABSTRACT

This work reviews the current state-of-the-art of liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) techniques applied to the analysis of pesticides in fruit-based and vegetable-based matrices. Nowadays, simultaneous trace analysis of hundreds of pesticides from different classes is required, preferably in just one run. The most commonly used QqQ-MS technology presents certain limitations in its application in a cost and effective way when analyzing a large number of pesticides. Thus, this review includes HRMS technology as a reliable complementary alternative allowing the analysis of a wide range of pesticides in food. Its capabilities and limitations in identifying, confirming and quantifying pesticides are discussed. HRMS instruments can adequately address such issues; however, the main drawbacks are as a result of insufficient prior optimization of the operational parameters during non-target analysis in full-scan mode and due to software shortcomings.


Subject(s)
Chromatography, Liquid/methods , Fruit/chemistry , Mass Spectrometry/methods , Pesticide Residues/analysis , Pesticide Residues/chemistry , Vegetables/chemistry
2.
Article in English | MEDLINE | ID: mdl-23281800

ABSTRACT

The main objective of this work was to establish a mathematical function that correlates pesticide residue levels in apple juice with the levels of the pesticides applied on the raw fruit, taking into account some of their physicochemical properties such as water solubility, the octanol/water partition coefficient, the organic carbon partition coefficient, vapour pressure and density. A mixture of 12 pesticides was applied to an apple tree; apples were collected after 10 days of application. After harvest, apples were treated with a mixture of three post-harvest pesticides and the fruits were then processed in order to obtain apple juice following a routine industrial process. The pesticide residue levels in the apple samples were analysed using two multi-residue methods based on LC-MS/MS and GC-MS/MS. The concentration of pesticides was determined in samples derived from the different steps of processing. The processing factors (the coefficient between residue level in the processed commodity and the residue level in the commodity to be processed) obtained for the full juicing process were found to vary among the different pesticides studied. In order to investigate the relationships between the levels of pesticide residue found in apple juice samples and their physicochemical properties, principal component analysis (PCA) was performed using two sets of samples (one of them using experimental data obtained in this work and the other including the data taken from the literature). In both cases the correlation was found between processing factors of pesticides in the apple juice and the negative logarithms (base 10) of the water solubility, octanol/water partition coefficient and organic carbon partition coefficient. The linear correlation between these physicochemical properties and the processing factor were established using a multiple linear regression technique.


Subject(s)
Beverages/analysis , Malus , Pesticides/analysis , Chromatography, Gas , Chromatography, Liquid , Filtration , Linear Models , Principal Component Analysis , Tandem Mass Spectrometry
3.
J Chromatogr A ; 1217(45): 7038-54, 2010 Nov 05.
Article in English | MEDLINE | ID: mdl-20926086

ABSTRACT

In this study we have developed and evaluated an analytical method for a rapid automated screening and confirmation of a large number of organic micro-contaminants (almost 400) and also the quantification of the positive findings in water samples of different types (surface and wastewaters) using liquid chromatography-electrospray quadrupole-time-of-flight mass spectrometry (LC-QTOFMS) based on the use of an accurate-mass database. The created database includes data not only on the accurate masses of the target ions but also on the characteristic in-source fragment ions, isotopic pattern and retention time data. This customized database was linked to commercially available software which extracted all the potential compounds of interest from the LC-QTOFMS raw data of each sample and matched them against the database to search for targeted compounds in the sample. The detailed fragmentation information has also been used as a powerful tool for the automatic identification of unknown compounds and/or transformation products with similar structures to those of known organic contaminants included in the database. The database can be continually enlarged. To confirm identification of compounds which have no fragment ions (or fragments with low intensity/relative abundance) from in-source CID fragmentation or isomers which are not distinguished within full single mass spectra, a "Targeted MS/MS" method is developed. Thereafter, these compounds can be further analyzed using the collision energy (CE) in QTOF-MS/MS mode. Linearity and limits of detection were studied. Method detection limits (MDLs) in effluent wastewater and river waters were, in most cases, lowers or equal to 5 and 2 ng/L, respectively. Only 15 compounds had MDLs between 5 and 50 ng/L in effluent wastewater matrix. We obtained a linearity of the calibration curves over two orders of magnitude. The method has been applied to real samples and the results obtained reveal that most of the pharmaceutically active compounds contained in the created database were present in the water samples with concentrations in the range of ng/L and µg/L levels and in most of the samples between 2 and 15 pesticides of the 300 contained in the database were also detected. In addition to the compounds included in the database, some degradation products were found, thus revealing the method as a useful tool for the analysis of organic micro-contaminants in waters.


Subject(s)
Chromatography, Liquid/methods , Pesticides/analysis , Pharmaceutical Preparations/analysis , Spectrometry, Mass, Electrospray Ionization/methods , Water Pollutants, Chemical/analysis , Databases, Factual , Linear Models , Molecular Weight , Pesticides/chemistry , Pharmaceutical Preparations/chemistry , Reproducibility of Results , Sensitivity and Specificity , Solid Phase Extraction , Water Pollutants, Chemical/chemistry
4.
Talanta ; 69(2): 370-6, 2006 Apr 15.
Article in English | MEDLINE | ID: mdl-18970576

ABSTRACT

Acceptance of toxicity bioassays as effective analytical tools in environmental areas needs guarantees of standardization but also validation. Ten European laboratories took part in an inter-laboratory study using different commercial devices based on bioluminescence inhibition of bacteria Vibrio fischeri. Reproducibility and stability by short toxicity endpoints, effective concentration that gives 10%, 50% and 80% of inhibition (EC(10), EC(50) and EC(80)) is evaluated. Parametric and non-parametric statistic is applied and performance of participant laboratories is addressed by z-scores calculated by non-parametric statistic. z-Score classification was based on harmonised protocol for proficiency testing of analytical laboratories (satisfactory |z|< or =2; questionable 2<|z|< or =3; unsatisfactory |z|>3). Tested samples were phenol, 3,5-dichlorophenol and influent wastewater. Based on z-score classification, more than 70% of the laboratories showed a satisfactory performance for phenol, 3,5-dichlorophenol and influent wastewater (86%, 90% and 70%, respectively). Reproducibility and stability was observed in toxicant references and in wastewater samples. EC(80) determination appears to be more robust that EC(10) and EC(50). EC determinations can be considered favorable at 5 and 15 min of exposition, in particular for EC(80). The use of different commercial devices can not be considered an additional source of variation.

5.
J Chromatogr A ; 1047(1): 129-35, 2004 Aug 20.
Article in English | MEDLINE | ID: mdl-15481468

ABSTRACT

Two GC-MS methods, based on the application of N,O-bis(trimethylsilyl)trifluoroacetamide-derivatization-GC-MS (selected-ion monitoring) and GC-MS-MS without derivatization, respectively, were optimised and applied to the determination of a group of five selected endocrine disrupting compounds (EDCs) in wastewaters. Both methods included solid-phase extraction with Oasis HLB cartridges allowing an enrichment factor for wastewater samples of 100-fold. The investigated EDCs were estrone, 17beta-estradiol, 17alpha-ethynylestradiol, 4-tert-octylphenol and bisphenol A. Results obtained from the validation studies yielded comparable results in both cases. Recoveries in spiked wastewaters at 50 ng/l were higher than 90% for all the compounds, except for 4-tert-octylphenol (75%). Repeatability and reproducibility were adequate, varying from 1.6 to 14%, except for estrone which reproducibility was 28% when the derivatization-GC-MS method was applied. Limits of detection calculated ranged from 2.5 to 27.5 ng/l with differences between both methods from 1.1 (estrone) to 10.4 (bisphenol A) times. Both methods were successfully applied to the analysis of the target compounds in sewage treatment plant influents and effluents. Traces of bisphenol A, 4-tert-octylphenol, estrone and 17beta-estradiol were detected at concentration levels ranging from 13.3 to 1105.2 ng/l.


Subject(s)
Endocrine Glands/drug effects , Gas Chromatography-Mass Spectrometry/methods , Water Pollutants, Chemical/analysis , Reproducibility of Results
SELECTION OF CITATIONS
SEARCH DETAIL
...