Rapid determination of L-ascorbic acid content in vitamin C serums by ultra-high-performance liquid chromatography-tandem mass spectrometry.

OBJECTIVE: This study aimed to develop and validate a rapid, simple, accurate and precise analytical method for the quantification of L-AA in vitamin C serums. Moreover, the developed method was further applied to determine L-AA in eight different brands of vitamin C serums. A complementary study was also carried out to evaluate the stability of L-AA in the vitamin C serum samples after 15, 30, 45 and 60 days of storage at ambient temperature (15-35°C). METHODS: Ultra-high-performance liquid chromatography-tandem mass spectrometry was applied. RESULTS: Quantitative analyses were performed with a total chromatographic run time of 1.5 min by matrix-matched calibration, and the analytical curve was linear over the range of 1-1700 µg L-1 with a correlation coefficient of 0.9998. The limits of detection (LOD) and quantification (LOQ) were 0.3 and 1.0 µg L-1 , respectively. Intra- and inter-assay precisions, expressed in terms of relative standard deviation, ranged from 0.3% and 2.2%, respectively, and recoveries in concentration levels of 1 and 5 µg L-1 were 103.9% and 101.2%, respectively. The proposed analytical method was successfully applied to determine the L-AA content in eight commercial vitamin C serum samples. The stability of the target analyte in samples stored at ambient temperature (15-35°C) was evaluated throughout 60 days with a 15-day interval between analyses. At 0 days, L-AA content in samples ranged from 1.05 to 169.91 mg L-1 , which decreases over time. CONCLUSION: The proposed method could be powerful in routine analyses to ensure the quantification of L-AA in vitamin C serums since it proved to be a simple, reliable, fast, precise, accurate and sensitive analytical method.

OBJECTIF: Cette étude visait à développer et valider une méthode analytique rapide, simple, exacte et précise pour la quantification de l'acide L-ascorbique dans les sérums à la vitamine C. De plus, la méthode développée a été appliquée pour déterminer l'acide L-ascorbique dans huit différentes marques de sérums à la vitamine C. Une étude complémentaire a également été réalisée pour évaluer la stabilité de l'acide L-ascorbique dans les échantillons de sérum à la vitamine C après 15, 30, 45 et 60 jours de conservation à température ambiante (15 à 35 °C). MÉTHODES: La chromatographie en phase liquide à haute performance avec spectrométrie de masse en tandem a été employée. RÉSULTATS: Des analyses quantitatives ont été réalisées avec une durée totale d'exécution chromatographique de 1,5 minute par calibration matricielle appariée, et la courbe analytique était linéaire sur la plage de 1 à 1700 µg L-1 avec un coefficient de corrélation de 0,9998. La limite de détection (LD) et la limite de quantification (LQ) ont été déterminées à 0,3 et 1,0 µg L−1 , respectivement. Les précisions intra- et inter-essais, exprimées en termes d'écart-type relatif, étaient de 0,3 % et 2,2 %, respectivement, et les récupérations aux niveaux de concentration de 1 et 5 µg L-1 étaient de 103,9 % et 101,2 %, respectivement. La méthode analytique proposée a été employée avec succès pour déterminer la teneur en acide L-ascorbique de huit échantillons de sérum à la vitamine C commerciaux. La stabilité de l'analyte cible dans les échantillons conservés à température ambiante (15 à 35 °C) a été évaluée sur 60 jours avec un intervalle de 15 jours entre les analyses. À 0 jour, la teneur en acide L-ascorbique dans les échantillons était comprise entre 1,05 et 169,91 µg L-1 , ce qui diminue au fil du temps. CONCLUSION: La méthode proposée pourrait être puissante dans les analyses de routine pour assurer la quantification de l'acide L-ascorbique dans les sérums à la vitamine C puisqu'elle s'est avérée être une méthode analytique simple, fiable, rapide, précise, exacte et sensible.

Pharmacokinetics of amoxicillin in obese and nonobese subjects.

AIMS: To compare the pharmacokinetics of amoxicillin (AMX) in obese and nonobese subjects, given as single dose 875-mg tablets. METHODS: A prospective, single-centre, open-label, clinical study was carried out involving 10 nonobese and 20 obese subjects given a dose of an AMX 875-mg tablet. Serial blood samples were collected between 0 and 8 hours after administration of AMX and plasma levels were quantified by liquid chromatography-tandem mass spectrometry. The pharmacokinetic parameters (PK) were calculated by noncompartmental analysis and means of the 2 groups were compared using Student t-test. Analysis of correlation between covariates and PK was performed using Pearson's correlation coefficient. RESULTS: Ten nonobese subjects (mean age 30.6 ± 7.12 y; body mass index 21.56 ± 1.95 kg/m2 ) and 20 obese subjects (mean age 34.47 ± 7.03 y; body mass index 33.17 ± 2.38 kg/m2 ) participated in the study. Both maximum concentration (Cmax ; 12.12 ± 4.06 vs. 9.66 ± 2.93 mg/L) and area under the curve (AUC)0-inf (34.18 ± 12.94 mg.h/L vs. 26.88 ± 9.24 mg.h/L) were slightly higher in nonobese than in obese subjects, respectively, but differences were not significant. The volume of distribution (V/F) parameter was statistically significantly higher in obese compared to nonobese patients (44.20 ± 17.85 L vs. 27.57 ± 12.96 L). Statistically significant correlations were observed for several weight metrics vs. AUC, Cmax , V/F and clearance, and for creatinine clearance vs. AUC, Cmax and clearance. CONCLUSION: In obese subjects, the main altered PK was V/F as a consequence of greater body weight. This may result in antibiotic treatment failure if standard therapeutic regimens are administered.

Evaluation of the QuEChERS method for the determination of phenolic compounds in yellow (Brassica alba), brown (Brassica juncea), and black (Brassica nigra) mustard seeds.

Studies about the phenolic composition of yellow (Brassica alba), brown (Brassica juncea), and black (Brassica nigra) mustard seeds are still scarce in the literature. Hence, this study describes, for the first time, the use of the QuEChERS extraction method followed by UHPLC-MS/MS analysis for phenolic compound determination in the seeds of these mustard species. Under the optimized extraction and analysis conditions, twenty-one phenolic compounds were evaluated. Six, eleven, and seven were found in B. alba, B. juncea, and B. nigra seeds, respectively. The most abundant phenolic compound was sinapic acid, which was found in amounts ranging from 44 to 82 times higher than the other major compounds found in the mustard seeds, ferulic, 4-hydroxybenzoic and protocatechuic acids. Overall, these results are an important contribution to the characterization of the phenolic composition of the three in natura mustard seeds species, and support future reliable phenolic compounds determination with the QuEChERS method.

Rapid extraction method followed by a d-SPE clean-up step for determination of phenolic composition and antioxidant and antiproliferative activities from berry fruits.

Despite the numerous studies that have shown a wide range of biological activities to berry fruits, scientific data focusing on modern, rapid and simple extraction methods followed by a clean-up step is still lacking. Therefore, the present work was aimed at investigating the use of a fast one-step solid-liquid extraction procedure followed by a dispersive solid-phase extraction (d-SPE) clean-up step to evaluate the phenolic composition, antioxidant and antiproliferative activities from three of the principal berries found in Brazil, pomegranate (Punica granatum L.), blackberry (Rubus ulmifolius Schott.), and strawberry (Fragaria × ananassa Duch.). Under the optimized extraction conditions, sixteen phenolic compounds were determined by UHPLC-MS/MS analysis and all berry extracts showed antioxidant activity and antiproliferative effects on cervical (HeLa) and colon (HT-29) cancer cells. Overall, these results highlight the importance of the clean-up step for more reliable data in studies of health-promoting proprieties from berry fruits.

Determination of acrylamide in brewed coffee by dispersive liquid-liquid microextraction (DLLME) and ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS).

This work has proposed the application of optimized dispersive liquid-liquid microextraction (DLLME) in order to extract acrylamide from brewed coffee samples for its subsequent determination by ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). DLLME achieved superior results employing 300 µL of brewed coffee, 100 µL of dichloromethane, 400 µL of acetonitrile and without sodium chloride addition. Quantitative analyses were carried out by the standard addition method, and the limits of detection and quantification were 0.9 and 3.0 µg L-1, respectively. Recoveries ranged from 97 to 106%, and the intra- and inter-assay precisions ranged from 6 to 9%. The proposed analytical method was applied to seventeen brewed coffee samples prepared in a filter coffee maker, and acrylamide amounts varied from 10.5 to 28.5 µg L-1. Therefore, the suggested DLLME-UPLC-MS/MS method is promising for routine analysis in order to guarantee the quality control of acrylamide in brewed coffee.

Evaluation of an alternative fluorinated sorbent for dispersive solid-phase extraction clean-up of the quick, easy, cheap, effective, rugged, and safe method for pesticide residues analysis.

In this study, the efficiency of a new fluorinated sorbent for dispersive solid-phase extraction (d-SPE) clean-up in extracts provided by the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) acetate method from tomato and sweet pepper samples was evaluated by ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). Clean-up using d-SPE technique has been widely used associated with the QuEChERS method. The most commonly sorbents used in d-SPE are primary secondary amine (PSA), octadecylsilane (C18) and graphitized carbon black (GCB), which are indicated to remove sugars, fatty acids, pigments, among others. The performance of an alternative fluorinated sorbent was compared with PSA and C18 sorbents for representative pesticides and better results were obtained when the fluorinated sorbent was used. Validation presented acceptable results for trueness and precision, with method limit of detection between 0.9 and 1.8µgkg-1 and limit of quantification from 2.6 to 5.4µgkg-1. Most of the compounds presented low matrix effect. Results showed that the fluorinated sorbent contribute to the clean-up of the tomato extract and is an effective alternative, with lower costs and greater efficiency. Commercial tomato samples were analyzed using the proposed method and residues of dimethoate, tetraconazole and thiamethoxam were detected.

Determination of some organic contaminants in water samples by solid-phase extraction and liquid chromatography-tandem mass spectrometry.

Independent methods for determination of organic contaminants such as pharmaceuticals and pesticides in drinking water samples, using SPE as the extraction technique and LC-MS/MS in the MRM mode with electrospray ionization, were developed and validated. Different SPE sorbents were evaluated, including lab-made fluorinated and phenyl and commercial Oasis HLB and C18, with the commercial phases being more suitable for the target compounds. Recoveries in the range of 70-120% were obtained for all target compounds, with the exception for paracetamol (acetaminophen), and precision values (inter-day and intra-day), expressed in terms of relative standard deviations (RSD), lower than 20% were obtained for all target compounds. Quantification limits were in the range of 0.006-0.208 µg L(-1) and the methods developed were successfully applied for the analysis of drinking water samples, detecting some pharmaceuticals and pesticides, but at concentration levels lower than the MRL.

Some new selective stationary phases for RP-HPLC.

At the present time, more complex analyses of apolar compounds with similar chemical structures or of polar compounds, especially basic ones, having diverse properties require more selective stationary phases having better stabilities. This paper describes several new stationary phases with directed selectivities that were prepared by immobilizing two different phenyl group-containing siloxanes and a trifluoropropyl-containing siloxane onto chromatographic silica and, in the case of the fluorinated siloxane, onto zirconized silica, using thermal treatment or microware radiation. The chromatographic properties and stabilities of these new phases were determined and several applications were evaluated. The phenyl-containing phases showed excellent characteristics related to the separation of several different types of aromatic compounds while the fluorinated phases, which present a more polar character, revealed selectivity for the separation of positional isomers as well as for a mixture of basic pharmaceuticals. Stability tests indicate that immobilization of the polysiloxanes increases column lifetimes by making the stationary phases less susceptible to dissolution, while the phases immobilized with microwave radiation were somewhat more stable than those immobilized by thermal treatments.

A new thermally immobilized fluorinated stationary phase for RP-HPLC.

A new fluorinated stationary phase was prepared through thermal immobilization of poly(methyl-3,3,3-trifluoropropylsiloxane) onto 5 microm Kromasil silica particles. The best conditions of immobilization time and temperature were determined through a central composite design and response surface methodologies. Physical-chemical characterization using solid-state (29)Si NMR measurements, infrared spectroscopy and elemental analysis showed that the immobilization process was effective to promote a coating of the support that corresponds to a monolayer of polymer. The stationary phase presents selectivity for positional isomers and good peak shape for basic compounds.

Poly(methyltetradecylsiloxane) immobilized onto silica for extraction of multiclass pesticides from surface waters.

A new material based on poly(methyltetradecylsiloxane) (PMTDS) thermally immobilized onto a silica support has been tested as a sorbent for the solid-phase extraction (SPE) from water of several pesticides used in soybean cultivation. The SPE methodology was developed and validated for six of these pesticides (imazethapyr, imazaquin, metsulfuron-methyl, bentazone, chlorimuron-ethyl and tebuconazole) according to the International Conference on Harmonization directives and the results were compared with those obtained with a commercial C18 SPE cartridge. The PMTDS-based sorbent gives results similar to the commercial sorbent with recoveries and precisions in agreement with directives for residue analysis. The quantification limits, after concentration, of all the pesticides evaluated were 1.0 microg L(-1), below the levels imposed by the principal regulatory agencies. The PMTDS-based sorbent preparation is fast, easy and reproducible and the cartridges are less expensive than similar commercial SPE materials.