ABSTRACT
Here, we describe the design features that lead to intrinsically thermally conductive polymers. Though polymers are conventionally assumed to be thermal insulators (<0.3 W m-1 K-1), significant efforts by the thermal transport community have shown that polymers can be intrinsically thermally conductive (>1.0 W m-1 K-1). However, these findings have not yet driven comprehensive synthetic efforts to expose how different macromolecular features impact thermal conductivity. Preliminary theoretical and experimental investigations have revealed that high k polymers can be realized by enhancing the alignment, crystallinity, and intermolecular interactions. While a holistic mechanistic framework does not yet exist for thermal transport in polymeric materials, contemporary literature suggests that phonon-like heat carriers may be operative in macromolecules that meet the abovementioned criteria. In this review, we offer a perspective on how high thermal conductivity polymers can be systematically engineered from this understanding. Reports for several classes of macromolecules, including linear polymers, network polymers, liquid-crystalline polymers, and two-dimensional polymers substantiate the design principles we propose. Throughout this work, we offer opportunities for continued fundamental and technological development of polymers with high thermal conductivity.
ABSTRACT
Modern microprocessor performance is limited by local hot spots induced at high frequency by busy integrated circuit elements such as the clock generator. Locally embedded thermoelectric devices (TEDs) are proposed to perform active cooling whereby thermoelectric effects enhance passive cooling by the Fourier law in removing heat from the hot spot to colder regions. To mitigate transient heating events and improve temperature stability, we propose a novel analytical solution that describes the temperature response of a periodically heated hot spot that is actively cooled by a TED driven electrically at the same frequency. The analytical solution that we present is validated by experimental data from frequency domain thermal reflectance (FDTR) measurements made directly on an actively cooled Si thermoelectric device where the pump laser replicates the transient hot spot. We herein demonstrate a practical method to actively cancel the transient temperature variations on circuit elements with TEDs. This result opens a new path to optimize the design of cooling systems for transient localized hot spots in integrated circuits.
ABSTRACT
Sintering theory predicts no long-range mass transport or distortion for uniformly heated particles during particle coalescence. However, in sintering-based manufacturing processes, permanent part distortion is often observed. The driving forces and mechanisms leading to this phenomenon are not understood, and efforts to reduce distortion are largely limited to a trial-and-error approach. In this paper, we demonstrate that distortion during sintering results from mass-transport driven by nonhomogeneous temperature distribution. We then show that hitherto unknown mass transport mechanisms, working in the direction opposite to temperature gradient are the likely cause of distortion. The experimental setup, designed for this purpose, enables the quantification of distortion during sintering. Two possible mass transport mechanisms are defined, and the continuum model applicable to both is formulated. The model accurately predicts the transient and permanent distortion observed during experiments, including their size dependence. Methods to control distortion that can give rise to 4D printing are discussed.
ABSTRACT
Infrared-pump, electronic-probe (IPEP) spectroscopy is used to measure heat flow into and out of CdSe nanocrystals suspended in an organic solvent, where the surface ligands are initially excited with an infrared pump pulse. Subsequently, the heat is transferred from the excited ligands to the nanocrystals and in parallel to the solvent. Parallel heat transfer in opposite directions uniquely enables us to differentiate the thermal conductances at the nanocrystal/ligand and ligand/solvent interfaces. Using a novel solution to the heat diffusion equation, we fit the IPEP data to find that the nanocrystal/ligand conductances range from 88 to 135 MW m-2 K-1 and are approximately 1 order of magnitude higher than the ligand/solvent conductances, which range from 7 to 26 MW m-2 K-1. Transient nonequilibrium molecular dynamics (MD) simulations of nanocrystal suspensions agree with IPEP data and show that ligands bound to the nanocrystal by bidentate bonds have more than twice the per-ligand conductance as those bound by monodentate bonds.
ABSTRACT
Thin film evaporation is a widely-used thermal management solution for micro/nano-devices with high energy densities. Local measurements of the evaporation rate at a liquid-vapor interface, however, are limited. We present a continuous profile of the evaporation heat transfer coefficient ([Formula: see text]) in the submicron thin film region of a water meniscus obtained through local measurements interpreted by a machine learned surrogate of the physical system. Frequency domain thermoreflectance (FDTR), a non-contact laser-based method with micrometer lateral resolution, is used to induce and measure the meniscus evaporation. A neural network is then trained using finite element simulations to extract the [Formula: see text] profile from the FDTR data. For a substrate superheat of 20 K, the maximum [Formula: see text] is [Formula: see text] MW/[Formula: see text]-K at a film thickness of [Formula: see text] nm. This ultrahigh [Formula: see text] value is two orders of magnitude larger than the heat transfer coefficient for single-phase forced convection or evaporation from a bulk liquid. Under the assumption of constant wall temperature, our profiles of [Formula: see text] and meniscus thickness suggest that 62% of the heat transfer comes from the region lying 0.1-1 µm from the meniscus edge, whereas just 29% comes from the next 100 µm.
ABSTRACT
Colloidal nanocrystal (NC) assemblies are promising for optoelectronic, photovoltaic, and thermoelectric applications. However, using these materials can be challenging in actual devices because they have a limited range of thermal conductivity and elastic modulus, which results in heat dissipation and mechanical robustness challenges. Here, we report thermal transport and mechanical measurements on single-domain colloidal PbS nanocrystal superlattices (NCSLs) that have long-range order as well as measurements on nanocrystal films (NCFs) that are comparatively disordered. Over an NC diameter range of 3.0-6.1 nm, we observe that NCSLs have thermal conductivities and Young's moduli that are up to â¼3 times higher than those of the corresponding NCFs. We also find that these properties are more sensitive to NC diameter in NCSLs relative to NCFs. Our measurements and computational modeling indicate that stronger ligand-ligand interactions due to enhanced ligand interdigitation and alignment in NCSLs account for the improved thermal transport and mechanical properties.
Subject(s)
Nanoparticles , Ligands , Nanoparticles/chemistryABSTRACT
In a frequency-domain thermoreflectance (FDTR) experiment, the phase lag between the surface temperature response and the applied heat flux is fit with an analytical solution to the heat diffusion equation to extract an unknown thermal property (e.g., thermal conductivity) of a test sample. A method is proposed to reduce the impact of uncertainty in the laser spot radius on the resulting uncertainty in the fitted property that is based on fitting to the quotient of the test sample phase and that of a reference sample. The reduction is proven analytically for a semi-infinite solid and was confirmed using numerical and real experiments on realistic samples. When the spot radius and its uncertainty are well known, the reference phase can be generated numerically. In this situation, FDTR experiments performed on Au-SiO2-Si and PbS nanocrystal test samples demonstrate 32% and 82% reductions in the overall uncertainty in thermal conductivity. When the spot radius used in the test sample measurement is not well known, a real reference sample, measured under conditions that lead to the same unknown spot radius, is required. Although the real reference sample introduces its own uncertainties, the total uncertainty in the fitted thermal conductivity can still be reduced. A reference sample can also be used to reduce uncertainty due to other sources, such as the transducer properties. Because frequency-domain solutions to the heat diffusion equation are the basis for time-domain thermoreflectance (TDTR) analysis, the approach can be extended to TDTR experiments.
ABSTRACT
As the features of microprocessors are miniaturized, low-dielectric-constant (low-k) materials are necessary to limit electronic crosstalk, charge build-up, and signal propagation delay. However, all known low-k dielectrics exhibit low thermal conductivities, which complicate heat dissipation in high-power-density chips. Two-dimensional (2D) covalent organic frameworks (COFs) combine immense permanent porosities, which lead to low dielectric permittivities, and periodic layered structures, which grant relatively high thermal conductivities. However, conventional synthetic routes produce 2D COFs that are unsuitable for the evaluation of these properties and integration into devices. Here, we report the fabrication of high-quality COF thin films, which enable thermoreflectance and impedance spectroscopy measurements. These measurements reveal that 2D COFs have high thermal conductivities (1 W m-1 K-1) with ultra-low dielectric permittivities (k = 1.6). These results show that oriented, layered 2D polymers are promising next-generation dielectric layers and that these molecularly precise materials offer tunable combinations of useful properties.
ABSTRACT
An emerging class of methylammonium lead iodide (MAPbI3)-based Ruddlesden-Popper (RP) phase perovskites, BA2MAn-1PbnI3n+1 (n = 1-7), exhibit enhanced stability to environmental conditions relative to MAPbI3, yet still degrade at elevated temperatures. We experimentally determine the thermal conductivities of these layered RP phases for n = 1-6, where n defines the number of repeated perovskite octahedra per layer. We measure thermal conductivities of 0.37 ± 0.13/0.12, 0.17 ± 0.08/0.07, 0.21 ± 0.05/0.04, and 0.19 ± 0.04/0.03 W/m·K in thin films of n = 1-4 and 0.08 ± 0.06/0.04, 0.06 ± 0.04/0.03, 0.06 ± 0.03/0.03, and 0.08 ± 0.07/0.04 W/m·K in single crystals of n = 3-6. With the exception of n = 1, these thermal conductivities are lower than the range of 0.34-0.50 W/m·K reported for single-crystal MAPbI3. Reduced-order lattice dynamics modeling suggests that the initially decreasing trend of thermal conductivity in similarly oriented perovskites with increasing n may result from the transport properties of coherent phonons, emergent from the superstructure, that do not scatter at the interfaces of organic butylammonium chains and perovskite octahedra. Reduced group velocity of coherent phonons in n = 3-6, a consequence of band flattening in the phonon dispersion, is primarily responsible for their ultralow thermal conductivities. Similar effects on thermal conductivity have been experimentally demonstrated in deposited superlattices, but never in naturally defined materials such as RP phases. GIWAXS measurements reveal that higher n RP phase thin films are less orientationally controlled and therefore possess apparently elevated thermal conductivities relative to single crystals of the same n.
ABSTRACT
The thermal conductivity of fullerene-based superatomic crystals (SACs) is investigated using molecular dynamics simulations. The temperature-dependent predictions agree with the trends of previous measurements. The thermal conductivity behavior emerges as a result of the C60 molecule rotational dynamics and orientation, which are quantified using the root mean square displacements of the carbon atoms and the relative orientations of the C60s. At low temperatures, the C60s exhibit small rotations around equilibrium positions (i.e., librations). When the librating C60s are orientationally-ordered, as in the [C60] and [Co6Se8(PEt3)6][C60]2 SACs, thermal conductivity decreases with increasing temperature, as is typical for a crystal. When the librating C60s are orientationally-disordered, however, as in the [Co6Te8(PEt3)6][C60]2 SAC, thermal conductivity is lower and temperature independent, as is typical for an amorphous solid. At higher temperatures, where the C60s in all three SACs freely-rotate and are thus dynamically disordered, thermal conductivity is temperature independent. The abrupt changes driven by the C60 dynamics suggest that fullerene-based SACs can be designed to be thermal conductivity switches based on a variety of external stimuli.
ABSTRACT
Whether the presence of adsorbates increases or decreases thermal conductivity in metal-organic frameworks (MOFs) has been an open question. Here we report observations of thermal transport in the metal-organic framework HKUST-1 in the presence of various liquid adsorbates: water, methanol, and ethanol. Experimental thermoreflectance measurements were performed on single crystals and thin films, and theoretical predictions were made using molecular dynamics simulations. We find that the thermal conductivity of HKUST-1 decreases by 40 - 80% depending on the adsorbate, a result that cannot be explained by effective medium approximations. Our findings demonstrate that adsorbates introduce additional phonon scattering in HKUST-1, which particularly shortens the lifetimes of low-frequency phonon modes. As a result, the system thermal conductivity is lowered to a greater extent than the increase expected by the creation of additional heat transfer channels. Finally, we show that thermal diffusivity is even more greatly reduced than thermal conductivity by adsorption.
ABSTRACT
To identify superior thermal contacts to graphene, we implement a high-throughput methodology that systematically explores the Ni-Pd alloy composition spectrum and the effect of Cr adhesion layer thickness on thermal interface conductance with monolayer graphene. Frequency domain thermoreflectance measurements of two independently prepared Ni-Pd/Cr/graphene/SiO2 samples identify a maximum metal/graphene/SiO2 junction thermal interface conductance of 114 ± (39, 25) MW/m2 K and 113 ± (33, 22) MW/m2 K at â¼10 at. % Pd in Ni-nearly double the highest reported value for pure metals and 3 times that of pure Ni or Pd. The presence of Cr, at any thickness, suppresses this maximum. Although the origin of the peak is unresolved, we find that it correlates with a region of the Ni-Pd phase diagram that exhibits a miscibility gap. Cross-sectional imaging by high-resolution transmission electron microscopy identifies striations in the alloy at this particular composition, consistent with separation into multiple phases. Through this work, we draw attention to alloys in the search for better contacts to two-dimensional materials for next-generation devices.
ABSTRACT
Superatomic crystals are composed of discrete modular clusters that emulate the role of atoms in traditional atomic solids. Owing to their unique hierarchical structures, these materials are promising candidates to host exotic phenomena, such as doping-induced superconductivity and magnetism. Low-dimensional superatomic crystals in particular hold great potential as electronic components in nanocircuits, but the impact of doping in such compounds remains unexplored. Here we report the electrical transport properties of Re6Se8Cl2, a two-dimensional superatomic semiconductor. We find that this compound can be n-doped in situ through Cl dissociation, drastically altering the transport behavior from semiconducting to metallic and giving rise to superconductivity with a critical temperature of â¼8 K and upper critical field exceeding 30 T. This work is the first example of superconductivity in a van der Waals superatomic crystal; more broadly, it establishes a new chemical strategy to manipulate the electronic properties of van der Waals materials with labile ligands.
ABSTRACT
The impact of chemical reactions on the thermal boundary conductance (TBC) of Au/metal contact/ß-Ga2O3 layered samples as a function of contact thickness is investigated using high-throughput thermoreflectance measurements. A maximum in TBC of 530 ± 40 (260 ± 25) MW/m2 K is discovered for a Cr (Ti) contact at a thickness of 2.5 (5) nm. There is no local maximum for a Ni contact, for which the TBC saturates at 410 ± 35 MW/m2 K for thicknesses greater than 3 nm. Relative to the Au/ß-Ga2O3 interface, which has a TBC of 45 ± 7 MW/m2 K, these nanoscale contacts enhance TBC by factors of 6 to 12. The TBC maximum only exists for metals capable of forming oxides that are enthalpically favorable compared to ß-Ga2O3. The formation of Cr2O3, via oxygen removal from the ß-Ga2O3 substrate, is confirmed by TEM analysis. The reaction-formed oxide layer reduces the potential TBC and leads to the maximum, which is followed by a plateau at a lower value, as its thickness saturates due to passivation. Many advanced materials are prone to similar chemical reactions, impacting contact engineering and thermal management for a variety of applications.
ABSTRACT
Atomically precise nanoscale clusters could assemble into crystalline ionic crystals akin to the atomic ionic solids through the strong electrostatic interactions between the constituent clusters. Here we show that, unlike atomic ionic solids, the electrostatic interactions between nanoscale clusters could be frustrated by using large clusters with long and flexible side-chains so that the ionic cluster pairs do not crystallize. As such, we report ionic superatomic materials that can be easily solution-processed into completely amorphous and homogeneous thin-films. These new amorphous superatomic materials show tunable compositions and new properties that are not achievable in crystals, including very high electrical conductivities of up to 300 S per meter, ultra low thermal conductivities of 0.05 W per meter per degree kelvin, and high optical transparency of up to 92%. We also demonstrate thin-film thermoelectrics with unoptimized ZT values of 0.02 based on the superatomic thin-films. Such properties are competitive to state-of-the-art materials and make superatomic materials promising as a new class of electronic and thermoelectric materials for devices.
ABSTRACT
Structural phase transitions run in families of crystalline solids. Perovskites, for example, feature a remarkable number of structural transformations that produce a wealth of exotic behaviors, including ferroelectricity, magnetoresistance, metal-insulator transitions and superconductivity. In superatomic crystals and other such materials assembled from programmable building blocks, phase transitions offer pathways to new properties that are both tunable and switchable. Here we describe [Co6Te8(PEt3)6][C70]2, a novel superatomic crystal with two separate phase transitions that drastically transform the collective material properties. A coupled structural-electronic phase transition triggers the emergence of a new electronic band in the fullerene sublattice of the crystal, increasing its electrical conductivity by 2 orders of magnitude, while narrowing its optical gap and increasing its spin density. Independently, an order-disorder transition transforms [Co6Te8(PEt3)6][C70]2 from a phonon crystal to a phonon glass. These results introduce a family of materials in which functional phase transformations may be manipulated by varying the constituent building blocks.
ABSTRACT
This study focuses on thermal analysis of the problem of scaling up from the vitrification of rabbit kidneys to the vitrification of human kidneys, where vitrification is the preservation of biological material in the glassy state. The basis for this study is a successful cryopreservation protocol for a rabbit kidney model, based on using a proprietary vitrification solution known as M22. Using the finite element analysis (FEA) commercial code ANSYS, heat transfer simulations suggest that indeed the rabbit kidney unquestionably cools rapidly enough to be vitrified based on known intrarenal concentrations of M22. Scaling up 21-fold, computer simulations suggest less favorable conditions for human kidney vitrification. In this case, cooling rates below -100 °C are sometimes slower than 1 °C/min, a rate that provides a clear-cut margin of safety at all temperatures based on the stability of rabbit kidneys in past studies. Nevertheless, it is concluded in this study that vitrifying human kidneys is possible without significant ice damage, assuming that human kidneys can be perfused with M22 as effectively as rabbit kidneys. The thermal analysis suggests that cooling rates can be further increased by a careful design of the cryogenic protocol and by tailoring the container to the shape of the kidney, in contrast to the present cylindrical container. This study demonstrates the critical need for the thermal analysis of experimental cryopreservation and highlights the unmet need for measuring the thermophysical properties of cryoprotective solutions under conditions relevant to realistic thermal histories.
Subject(s)
Cryopreservation , Kidney , Temperature , Vitrification , Animals , Finite Element Analysis , Humans , RabbitsABSTRACT
Thermal management plays a critical role in the design of solid state materials for energy conversion. Lead halide perovskites have emerged as promising candidates for photovoltaic, thermoelectric, and optoelectronic applications, but their thermal properties are still poorly understood. Here, we report on the thermal conductivity, elastic modulus, and sound speed of a series of lead halide perovskites MAPbX3 (X = Cl, Br, I), CsPbBr3, and FAPbBr3 (MA = methylammonium, FA = formamidinium). Using frequency domain thermoreflectance, we find that the room temperature thermal conductivities of single crystal lead halide perovskites range from 0.34 to 0.73 W/m·K and scale with sound speed. These results indicate that regardless of composition, thermal transport arises from acoustic phonons having similar mean free path distributions. A modified Callaway model with Born von Karmen-based acoustic phonon dispersion predicts that at least â¼70% of thermal conductivity results from phonons having mean free paths shorter than 100 nm, regardless of whether resonant scattering is invoked. Hence, nanostructures or crystal grains with dimensions smaller than 100 nm will appreciably reduce thermal transport. These results are important design considerations to optimize future lead halide perovskite-based photovoltaic, optoelectronic, and thermoelectric devices.
ABSTRACT
Soft dielectric materials typically exhibit poor heat transfer properties due to the dynamics of phonon transport, which constrain thermal conductivity (k) to decrease monotonically with decreasing elastic modulus (E). This thermal-mechanical trade-off is limiting for wearable computing, soft robotics, and other emerging applications that require materials with both high thermal conductivity and low mechanical stiffness. Here, we overcome this constraint with an electrically insulating composite that exhibits an unprecedented combination of metal-like thermal conductivity, an elastic compliance similar to soft biological tissue (Young's modulus < 100 kPa), and the capability to undergo extreme deformations (>600% strain). By incorporating liquid metal (LM) microdroplets into a soft elastomer, we achieve a â¼25× increase in thermal conductivity (4.7 ± 0.2 Wâ m-1â K-1) over the base polymer (0.20 ± 0.01 Wâ m-1·K-1) under stress-free conditions and a â¼50× increase (9.8 ± 0.8 Wâ m-1·K-1) when strained. This exceptional combination of thermal and mechanical properties is enabled by a unique thermal-mechanical coupling that exploits the deformability of the LM inclusions to create thermally conductive pathways in situ. Moreover, these materials offer possibilities for passive heat exchange in stretchable electronics and bioinspired robotics, which we demonstrate through the rapid heat dissipation of an elastomer-mounted extreme high-power LED lamp and a swimming soft robot.