Strain-Modulated Flexible Bio-Organic/Graphene/PET Sensors Based on DNA-Curcumin Biopolymer.

In recent years, there has been growing interest in the development of metal-free, environmentally friendly, and cost-effective biopolymer-based piezoelectric strain sensors (bio-PSSs) for flexible applications. In this study, we have developed a bio-PSS based on pure deoxyribonucleic acid (DNA) and curcumin materials in a thin-film form and studied its strain-induced current-voltage characteristics based on piezoelectric phenomena. The bio-PSS exhibited flexibility under varying compressive and tensile loads. Notably, the sensor achieved a strain gauge factor of 407 at an applied compressive strain of -0.027%, which is 8.67 times greater than that of traditional metal strain gauges. Furthermore, the flexible bio-PSS demonstrated a rapid response under a compressive strain of -0.08%. Our findings suggest that the proposed flexible bio-PSS holds significant promise as a motion sensor, addressing the demand for environmentally safe, wearable, and flexible strain sensor applications.

Barrier Height, Ideality Factor and Role of Inhomogeneities at the AlGaN/GaN Interface in GaN Nanowire Wrap-Gate Transistor.

It is essential to understand the barrier height, ideality factor, and role of inhomogeneities at the metal/semiconductor interfaces in nanowires for the development of next generation nanoscale devices. Here, we investigate the drain current (Ids)-gate voltage (Vgs) characteristics of GaN nanowire wrap-gate transistors (WGTs) for various gate potentials in the wide temperature range of 130-310 K. An anomalous reduction in the experimental barrier height and rise in the ideality factor with reducing the temperature have been perceived. It is noteworthy that the variations in barrier height and ideality factor are attributed to the spatial barrier inhomogeneities at the AlGaN/GaN interface in the GaN nanowire WGTs by assuming a double Gaussian distribution of barrier heights at 310-190 K (distribution 1) and 190-130 K (distribution 2). The standard deviation for distribution 2 is lower than that of distribution 1, which suggests that distribution 2 reflects more homogeneity at the AlGaN/GaN interface in the transistor's source/drain regions than distribution 1.

Carrier Trap and Their Effects on the Surface and Core of AlGaN/GaN Nanowire Wrap-Gate Transistor.

We used capacitance-voltage (C-V), conductance-voltage (G-V), and noise measurements to examine the carrier trap mechanisms at the surface/core of an AlGaN/GaN nanowire wrap-gate transistor (WGT). When the frequency is increased, the predicted surface trap density promptly drops, with values ranging from 9.1 × 1013 eV-1∙cm-2 at 1 kHz to 1.2 × 1011 eV-1∙cm-2 at 1 MHz. The power spectral density exhibits 1/f-noise behavior in the barrier accumulation area and rises with gate bias, according to the 1/f-noise features. At lower frequencies, the device exhibits 1/f-noise behavior, while beyond 1 kHz, it exhibits 1/f2-noise behavior. Additionally, when the fabricated device governs in the deep-subthreshold regime, the cutoff frequency for the 1/f2-noise features moves to the subordinated frequency (~102 Hz) side.

Temperature-Dependent Carrier Transport in GaN Nanowire Wrap-Gate Transistor.

For the creation of next-generation nanoscale devices, it is crucial to comprehend the carrier transport mechanisms in nanowires. Here, we examine how temperature affects the properties of GaN nanowire wrap-gate transistors (WGTs), which are made via a top-down technique. The predicted conductance in this transistor remains essentially unaltered up to a temperature of 240 K and then increases after that as the temperature rises. This is true for increasing temperature at gate voltages less than threshold voltage (Vgs < Vth). Sharp fluctuations happen when the temperature rises with a gate voltage of Vth < Vgs < VFB. The conductance steadily decreases with increasing temperature after increasing the gate bias to Vgs > VFB. These phenomena are possibly attributed to phonon and impurity scattering processes occurring on the surface or core of GaN nanowires.

High Device Performances and Noise Characteristics of AlGaN/GaN HEMTs Using In Situ SiCN and SiN Cap Layer.

We fabricated and characterized AlGaN/GaN high-electron mobility transistors (HEMTs) with a nano-sized in situ cap layer (one is a silicon carbon nitride (SiCN) layer, and the other is a silicon nitride (SiN) layer) comparing to the conventional device without an in situ cap layer. The pulse characteristics and noise behaviors for two devices with in situ cap layers are much superior to those of the reference device without a cap layer, which means that the in situ cap layer effectively passivates the AlGaN surface. On the other hand, the device with an in situ SiCN cap layer showed the excellent device characteristics and noise performances compared to the other devices because of the reduced positive ionic charges and enhanced surface morphology caused by carbon (C) surfactant atoms during the growth of the SiCN cap layer. These results indicate that the AlGaN/GaN HEMT with the in situ SiCN cap layer is very promising for the next high-power device by replacing the conventional HEMT.

Strain-Controlled Flexible Graphene/GaN/PDMS Sensors Based on the Piezotronic Effect.

Using simple graphene transfer and the laser lift-off process for a non-centrosymmetric GaN layer on a flexible polydimethylsiloxane (PDMS) substrate, the piezotronic effect by strain-induced current-voltage measurements at the two end points is studied. By inducing compressive strain on the flexible graphene/GaN/PDMS sensor, the Schottky barrier between the graphene and GaN/PDMS heterojunction can be electro-mechanically modulated by the piezotronic effect. It is observed that the flexible graphene/GaN/PDMS sensor is sensitive to various applied compressive and tensile strains in the positive/negative bias scans. The sensor is extremely sensitive to a compressive strain of -0.1% with a gauge factor of 13.48, which is 3.7 times higher than that of a standard metal strain gauge. Furthermore, the sharp response of the flexible graphene/GaN/PDMS sensor under the -0.1% compressive strain is also investigated. The results of this study herald the development of commercially viable large-scale flexible/wearable strain sensors based on the strain-controlled piezotronic effect in future investigations.

Phytogenic Generation of NiO Nanoparticles Using Stevia Leaf Extract and Evaluation of Their In-Vitro Antioxidant and Antimicrobial Properties.

In the present study, economically viable NiO nanoparticles were produced by biogenic preparation using stevia leaf broth and their in-vitro antioxidant and antimicrobial activities were evaluated. The properties of the prepared NiO nanoparticles were confirmed by analytical techniques such as Ultraviolet-Visible (UV-Vis), X-ray diffraction (XRD), FE-SEM, and Fourier transform infrared spectroscopy (FTIR) analyses. Morphological studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the size of synthesized nanoparticles ranged from 20 to 50 nm, most of which were spherical and few of which were agglomerated. The role of the biological moieties, which reduce and cap the nanoparticles, was studied using FTIR analysis. The prepared nanoparticles strongly inhibited gram-negative bacteria, which is a camper with gram-positive bacteria and fungi. Furthermore, it performs an effective in-vitro activity through α,α-diphenyl-ß-picrylhydrazyl (DPPH) reduction. Thus, it can be concluded that the effective and easy green synthesis process used for NiO nanoparticles provides potential antimicrobial agents against multidrug-resistant microbes.