ABSTRACT
In this study, the microstructure and the deformation mechanisms of TiN, CrN and multilayer TiN/CrN thin films on silicon substrates were investigated. Cross-sectional lamellas of nanoindents were prepared by focused ion beam milling to observe by transmission electron microscopy the microstructure of the as-deposited and deformed materials. TiN film exhibits nanocrystalline columns, whereas CrN shows large grains. The TiN/CrN multilayer presents microstructural features typical for both materials. A film hardness of 16.9GPa for CrN, 15.8GPa for TiN and 16.6GPa for TiN/CrN was found by the nanoindentation. Reduced modulus recorded for TiN and CrN reference coatings were 221.54 and 171.1GPa, respectively, and 218.6GPa for the multilayer coating. The deformation mechanisms were observed via in-situ scanning electron microscope nanoindentation. The TiN thin film showed short radial cracks, whereas CrN deformed through pile-up and densification of the material. For TiN/CrN multilayer pile-up and cracks were found. Transmission electron microscopy observations indicated that TiN deforms through grain boundary sliding and CrN via densification and material flow. The deformation mechanism observed in TiN/CrN multilayer was found to be a mixture of both modes.
ABSTRACT
The nonstationary character of roughness is a widely recognized property of surface morphology and suggests modeling several solid surfaces by fractal geometry. In the field of contact mechanics, this demands novel investigations attempting to clarify the role of multiscale roughness during physical contact. Here we review the results we recently obtained in the characterization of the contact mechanics of fractal surfaces by depth-sensing indentation. One class of experiments was conducted on organic thin films, load-displacement curves being acquired by atomic force microscopy using custom-designed tips. Another class of experiments focused on well-defined crystalline and mechanically polished ceramic substrates probed by a traditional nanoindenter. We observed the first-loading cycle to be considerably affected by surface roughness. Plastic failure was found to dominate incipient contact while contact stiffness increased on decreasing fractal dimension and roughness. Our findings suggest fractal parameters to drive contact mechanics whenever the penetration depth is kept below the interface width.
