Characterizing the ZrC(111)/c-ZrO2(111) Hetero-Ceramic Interface: First Principles DFT and Atomistic Thermodynamic Modeling.

The mechanical and physical properties of zirconium carbide (ZrC) are limited to its ability to deteriorate in oxidizing environments. Low refractory oxides are typically formed as layers on ZrC surfaces when exposed to the slightest concentrations of oxygen. However, this carbide has a wide range of applications in nuclear reactor lines and nozzle flaps in the aerospace industry, just to name a few. To develop mechanically strong and oxygen-resistant ZrC materials, the need for studying and characterizing the oxidized layers, with emphasis on the interfacial structure between ZrC and the oxidized phases, cannot be understated. In this paper, the ZrC(111)//c-ZrO2 (111) interface was studied by both finite temperature molecular dynamic simulation and DFT. The interfacial mechanical properties were characterized by the work of adhesion which revealed a Zr|OO|Zr|OO//ZrC(111) interface model as the most stable with an oxygen layer from ZrO2 being deposited on the ZrC(111) surface. Further structural analysis at the interface showed a crack in the first ZrO2 layer at the interfacial region. Investigations of the electronic structure using the density of state calculations and Bader charge analysis revealed the interfacial properties as local effects with no significant impacts in the bulk regions of the interface slab.

CuO/CeO2 catalysts for glycerol selective conversion to lactic acid.

Ceria supported copper oxide catalysts were produced by a deposition-precipitation method, at a high copper loading (up to >25 wt%). These materials demonstrated excellent properties for glycerol selective conversion to lactic acid, with a conversion reaching up to 87% with a selectivity to lactic acid of 74% (8 h reaction, 220 °C, under N2 pressure). These catalysts also exhibited high stability upon 5 successive reaction cycles. The formation of a crystalline CuO phase was demonstrated in the nanocomposites at a high Cu loading, with elongated shaped particles formed on the cerium oxide surface. Such particles were however, not observed at low Cu loadings. XPS analysis revealed that Cu(ii) was the main Cu species on the fresh catalyst, and that this species was reduced to Cu(i) during the reaction. Complementary characterization over the spent catalyst clearly showed the morphological modifications of the CuO phase, however, did not impact significantly either glycerol conversion or selectivity to lactic acid upon recycling. For instance, apparently, the catalytic activity of CuO largely depends on the Cu(ii) species.

Nisin-activated hydrophobic and hydrophilic surfaces: assessment of peptide adsorption and antibacterial activity against some food pathogens.

An effective antimicrobial packaging or food contact surface should be able to kill or inhibit micro-organisms that cause food-borne illnesses. Setting up such systems, by nisin adsorption on hydrophilic and hydrophobic surfaces, is still a matter of debate. For this purpose, nisin was adsorbed on two types of low-density polyethylene: the hydrophobic native film and the hydrophilic acrylic acid-treated surface. The antibacterial activity was compared for those two films and it was highly dependent on the nature of the surface and the nisin-adsorbed amount. The hydrophilic surfaces presented higher antibacterial activity and higher amount of nisin than the hydrophobic surfaces. The effectiveness of the activated surfaces was assessed against Listeria innocua and the food pathogens Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. S. aureus was more sensitive than the three other test bacteria toward both nisin-functionalized films. Simulation tests to mimic refrigerated temperature showed that the films were effective at 20 and 4 °C with no significant difference between the two temperatures after 30 min of exposure to culture media.

Nisin adsorption on hydrophilic and hydrophobic surfaces: evidence of its interactions and antibacterial activity.

Study of peptides adsorption on surfaces remains a current challenge in literature. A complementary approach, combining X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to investigate the antimicrobial peptide nisin adsorption on hydrophilic and hydrophobic surfaces. The native low density polyethylene was used as hydrophobic support and it was grafted with acrylic acid to render it hydrophilic. XPS permitted to confirm nisin adsorption and to determine its amount on the surfaces. ToF-SIMS permitted to identify the adsorbed bacteriocin type and to observe its distribution and orientation behavior on both types of surfaces. Nisin was more oriented by its hydrophobic side to the hydrophobic substrate and by its hydrophilic side to the outer layers of the adsorbed peptide, in contrast to what was observed on the hydrophilic substrate. A correlation was found between XPS and ToF-SIMS results, the types of interactions on both surfaces and the observed antibacterial activity. Such interfacial studies are crucial for better understanding the peptides interactions and adsorption on surfaces and must be considered when setting up antimicrobial surfaces.

Composition-dependent morphostructural properties of Ni-Cu oxide nanoparticles confined within the channels of ordered mesoporous SBA-15 silica.

NiO and NiO-CuO polycrystalline rodlike nanoparticles were confined and stabilized within the channels of ordered mesoporous SBA-15 silica by a simple and viable approach consisting in incipient wetness impregnation of the calcined support with aqueous solutions of metal nitrates followed by a mild drying step at 25 °C and calcination. As revealed by low- and high-angle XRD, N2 adsorption/desorption, HRTEM/EDXS and H2 TPR analyses, the morphostructural properties of NiO-CuO nanoparticles can be controlled by adjusting their chemical composition, creating the prerequisites to obtain high performance bimetallic catalysts. Experimental evidence by in situ XRD monitoring during the thermoprogrammed reduction indicates that the confined NiO-CuO nanoparticles evolve into thermostable and well-dispersed Ni-Cu heterostructures. The strong Cu-Ni and Ni-support interactions demonstrated by TPR and XPS were put forward to explain the formation of these new bimetallic structures. The optimal Ni-Cu/SBA-15 catalyst (i.e., Cu/(Cu+Ni) atomic ratio of 0.2) proved a greatly enhanced reducibility and H2 chemisorption capacity, and an improved activity in the hydrogenation of cinnamaldehyde, as compared with the monometallic Ni/SBA-15 or Cu/SBA-15 counterparts, which can be associated with the synergism between nickel and copper and high dispersion of active components on the SBA-15 host. The unique structure and controllable properties of both oxidic and metallic forms of Ni-Cu/SBA-15 materials make them very attractive for both fundamental research and practical catalytic applications.

A well-defined silica-supported dinuclear tungsten(III) amido species: synthesis, characterization and reactivity.

Grafting of [W(2)(NMe(2))(6)] onto dehydroxylated silica affords the well-defined surface species [([triple bond, length as m-dash]Si-O)W(2)(NMe(2))(5)], characterized by elemental analysis, and infrared, Raman and NMR spectroscopies, and the catalytic reactivity of this supported tungsten(III) d(3)-d(3) dimer and of its alkoxide derivatives towards alkynes has been probed.