ABSTRACT
Silver nanowires (AgNWs) are excellent candidate electrode materials in next-generation wearable devices due to their high flexibility and high conductivity. In particular, patterning techniques for AgNWs electrode manufacture are very important in the roll-to-roll printing process to achieve high throughput and special performance production. It is also essential to realize a non-contact mode patterning for devices in order to keep the pre-patterned components away from mechanical damages. Here, we report a successful non-contact patterning of AgNWs-based stretchable and transparent electrodes by laser-induced forward transfer (LIFT) technique. The technique was used to fabricate a 100% stretchable electrode with a width of 200 µm and electrical resistivity 10-4 Ωcm. Experiments conducted integrating the stretchable electrode on rubber substrate in which LED was pre-fabricated showed design flexibility resulting from non-contact printing. Further, a patterned transparent electrode showed over 80% in optical transmittance and less than 100 Ω sq-1 in sheet resistance by the optimized LIFT technique.
ABSTRACT
In this paper we introduce a microfluidic device ultimately to be applied as a wearable sweat sensor. We show proof-of-principle of the microfluidic functions of the device, namely fluid collection and continuous fluid flow pumping. A filter-paper based layer, that eventually will form the interface between the device and the skin, is used to collect the fluid (e.g., sweat) and enter this into the microfluidic device. A controllable evaporation driven pump is used to drive a continuous fluid flow through a microfluidic channel and over a sensing area. The key element of the pump is a micro-porous membrane mounted at the channel outlet, such that a pore array with a regular hexagonal arrangement is realized through which the fluid evaporates, which drives the flow within the channel. The system is completely fabricated on flexible polyethylene terephthalate (PET) foils, which can be the backbone material for flexible electronics applications, such that it is compatible with volume production approaches like Roll-to-Roll technology. The evaporation rate can be controlled by varying the outlet geometry and the temperature. The generated flows are analyzed experimentally using Particle Tracking Velocimetry (PTV). Typical results show that with 1 to 61 pores (diameter = 250 µm, pitch = 500 µm) flow rates of 7.3 × 10(-3) to 1.2 × 10(-1) µL/min are achieved. When the surface temperature is increased by 9.4°C, the flow rate is increased by 130 %. The results are theoretically analyzed using an evaporation model that includes an evaporation correction factor. The theoretical and experimental results are in good agreement.
Subject(s)
Lab-On-A-Chip Devices , Equipment Design , Membranes, Artificial , Models, Theoretical , Polyethylene Terephthalates , Skin , Sweat , TemperatureABSTRACT
The fast-growing market of organic electronics stimulates the development of versatile technologies for structuring thin-film materials. Ultraviolet lasers have proven their full potential for patterning organic thin films, but only a few studies report on interaction with thin-film barrier layers. In this paper, we present an approach in which the laser patterning process is optimized together with the barrier film, leading to a highly selective patterning technology without introducing barrier damage. This optimization is crucial, as the barrier damage would lead to moisture and oxygen ingress, with accelerated device degradation as a result. Following process optimization, a laser processed flexible organic LED has been fabricated and thin-film encapsulated and its operation is shown for the first time in atmospheric conditions.
ABSTRACT
A femtosecond laser has been successfully utilized for patterning thin Flexible Organic Light Emitting Diode (FOLED) structures of individual layer thickness around 100nm. The authors report in this paper a step-like ablation behavior at the layer interfaces which accounts for a local removal of entire layers. Various surface analyzing techniques are used to investigate the morphologies and chemical compositions within and in the vicinity of the ablation areas. This study opens a new avenue in selectively ablating different layers from a multilayer stack on flexible substrates using fs lasers allowing post deposition structuring of large area flexible organic electronic devices.
