Pork muscle profiling: pH and instrumental color of the longissimus thoracis is not representative of pH and instrumental color of shoulder and ham muscles.

From a population of 351 pork carcasses, 3.0-cm thick chops from the 10th rib location of the longissimus thoracis, faced surfaces of the triceps brachii and serratus ventralis muscles from the boneless shoulder, and faced surfaces of the biceps femoris, semitendinosus, semimembranosus, adductor, rectus femoris, and vastus lateralis muscles from the boneless ham were evaluated for pH and instrumental color (Minolta CR-400). Evaluations were conducted for at least three different locations on each of the muscle samples and averaged before data analysis occurred. The longissimus thoracis had the lowest pH and the lightest and least red color compared with the other eight muscles evaluated in this study (mean differences ranged from 0.98 to 8.70 for L*, 3.98 to 12.56 for a*, and 0.026 to 0.409 for pH). Furthermore, regression analysis suggested that pH and color values for the longissimus thoracis were not adequate predictors for pH and color values obtained from other muscles and therefore consideration should be given to the individual muscles that are of interest.

Age at castration (surgical or immunological) impacts carcass characteristics and meat quality of male pigs.

In order to accurately estimate body composition at slaughter and to meet specific market targets, the influence of age at time of castration (surgical or immunological) on body composition and boar taint indicators must be determined for male pigs. In all, 48 males were randomly assigned to one of four management regimens: (1) entire male pigs (EM), (2) EM surgically castrated at ~40 kg BW and 10 weeks of age (late castrates; LC), (3) conventional, early surgical castrates (within 4 days of birth; EC) and (4) EM immunized with a gonadotropin-releasing hormone (GnRH) analog (primary dose at 30 kg BW and 8 weeks of age; booster dose at 70 kg and 14 weeks of age; IM). Pigs were fed corn and soybean meal-based diets that were not limiting in essential nutrients. Back fat was sampled on days -3, 8, 18 and 42, relative to administering the booster dose of GnRH analog at day 0, to determine androstenone concentrations (n=8 or 9/group). Fat androstenone concentrations in IM were lower than EM between days 8 and 42 after administering the booster dose (173 v. 863 ng/g, respectively; P<0.01), and were not different from surgically castrated males (EC and LC) after day 18. Slaughter occurred at ~115 kg BW, 42 days (6 weeks) after administering the booster dose for IM, and 10 and 20 weeks after surgical castration for LC and EC, respectively (n=8 or 9/group). At slaughter, live BW, liver weight as a percent of live BW, dissectible bone as a percent of cold carcass side, body protein and water contents and whole-body protein deposition decreased with time after surgical castration (linear; P<0.05), whereas dressing percentage, dissectible fat, probe fat depth and body fat content increased with time after surgical castration (linear; P<0.05). The IM had intermediate dressing percentage and dissected fat to EM and EC, whereas liver weight as a percent of live BW and body protein and lipid contents were not different from EM. Whole-body lipid deposition tended to be greater in IM than in EM between 14 and 20 weeks of age (373 v. 286 g/d; P=0.051). In conclusion, castration of male pigs after 6 weeks of age has a lasting effect on physical and chemical body composition. The relationship between time after castration and body composition may be developed to predict carcass composition and can be used to determine the ideal immunization schedule aimed at specific markets in the future.

Comparative carcass and tissue nutrient composition of transgenic Yorkshire pigs expressing phytase in the saliva and conventional Yorkshire pigs.

A transgenic line of Yorkshire (YK) pigs named the Cassie (CA) line was produced with a low copy number phytase transgene inserted in the genome. The transgenic line efficiently digests P, Ca, and other major minerals of plant dietary origin. The objectives of this study were to 1) compare carcass and tissue nutrient composition and meat quality traits for third generation hemizygous CA line market BW finisher pigs (n = 24) with age-matched conventional YK finisher pigs (n = 24) and 2) examine effects of outbreeding with high-index conventional YK boars on modifying carcass leanness from the third to sixth generations in CA line finisher boars (n = 73) and gilts (n = 103). Cassie boars (n = 12) and CA gilts (n = 12) were fed diets without supplemental P and comparable numbers of age-matched YK boars and gilts fed diets containing supplement P were raised throughout the finisher phase. The pigs were slaughtered and then fabricated into commercial pork primals before meat composition and quality evaluation. Proximate and major micronutrient composition was determined on tissues including fat, kidney, lean, liver, and skin. The main difference observed was greater (P = 0.033) crude fat content in CA boar carcasses and increased (P < 0.04) leaf lard in both CA boars and gilts but no differences were observed (P = 0.895 and P = 0.223, respectively) in carcass backfat thickness as compared with YK pigs. There were no substantive differences in tissue composition, except for CA boar kidneys. Numerous changes in the mineral, fatty acid, and indispensable AA composition for CA boar kidneys were not apparent in CA gilts. These changes may point to adaptive physiological changes in the boar kidney necessary for homeostatic regulation of mineral retention related to phytase action rather than to insertion of the transgene. However, from a meat composition perspective, transgenic expression of phytase in the CA line of YK pigs had little overall effect on meat composition. Outbreeding of high-index CA gilts with high-index commercial YK boars linearly reduced (P = 0.002) back fat thickness with a corresponding linear increase (P = 0.001) in lean yield in finisher CA gilts, although no change in these parameters was observed in CA finisher boars. The increase in lean yield in CA gilts by selective breeding without affecting the level of salivary phytase activity documents the value of conventional genetic selection in conjunction with genetic modification.

Effects of hot boning and moisture enhancement on the eating quality of cull cow beef.

The effects of chilling method and moisture enhancement were examined for improving eating quality of semimembranosus (SM) and longissimus lumborum (LL) from 62 cull beef cows. Chilling method included hot boning muscles after 45 to 60 min postmortem or conventional chilling for 24 h. Moisture enhancement included 1) a non-injected control (CONT) or injection processing (10% of product weight) using 2) Sodium Tripolyphosphate/salt (Na/STP), 3) Sodium Citrate (NaCIT), 4) Calcium Ascorbate (CaASC), or 5) Citrus Juices (CITRUS). Chilling method by moisture enhancement treatment interactions (P<0.09) were due to decreased hue, chroma and sarcomere length values in hot boned vs. conventionally chilled product (SM and LL) for CaASC vs. other moisture enhancement treatments. Chilling method by moisture enhancement treatment interactions (P<0.05) were due to decreased shear force and increased tenderness in conventionally chilled vs. hot boned LL using CaASC vs. Na/STP. Moisture enhancement can improve tenderness of cull cow beef depending on combinations of chilling method and moisture enhancement treatments used.

Influence of feeding increasing levels of dry corn distillers grains plus solubles in whole corn grain-based finishing diets on total tract digestion, nutrient balance, and excretion in beef steers.

Four crossbred steers (average BW = 478 ± 33 kg) were used in a 4 × 4 Latin square design to determine the effects of dietary concentration of dry corn distillers grains plus solubles (DDGS) in whole corn-based finishing diets on total tract digestion and nutrient balance and excretion. The DDGS were fed at 0% (control), 16.7%, 33.3%, and 50% of dietary DM. All diets contained 10% (DM basis) alfalfa/grass haylage and were formulated to meet or exceed the estimated requirements for CP. Steers were fed the experimental diets ad libitum for a 14-d adaptation period followed by a 5-d period for fecal and urine collection. Increasing concentration of DDGS in diets from 0 to 50% of DM linearly decreased (P < 0.05) total tract DM and starch digestibility (from 77.8 to 72.9%, and 89.2 to 81.5%, respectively). Daily N and P intakes linearly increased (P = 0.06 and P = 0.01, respectively) with increasing DDGS concentration. Fecal and urinary N, P, S, Mg, and K excretion linearly increased (P < 0.05) with increasing DDGS concentration; however, Se and Na excretion did not differ (P > 0.38) among treatments. Retention (g/d; intake minus urinary and fecal excretion) of N did not differ (P > 0.16) among treatments. Retention of P tended (P = 0.07) to linearly increase and retention of S (g/d) linearly increased (P = 0.004), with increasing DDGS concentration. There were no effects (P > 0.16) of dietary treatment on digestion and retention of Se, Mg, K, and Na. Plasma P and S concentrations increased (P = 0.03 and 0.01, respectively) with increasing DDGS concentration. These data indicate that feeding DDGS up to 50% of dietary DM in whole corn grain-based finishing diets does not have a negative effect on nutrient retention but decreases digestibility. Total excretion of N, P, Ca, Mg, S, and K increased as DDGS concentration increased.

The effects of skeletal separation and moisture enhancement for improving the eating quality of cull cow beef.

Sixty-two cull beef cows were slaughtered to investigate effects of skeletal separation and moisture enhancement on beef eating quality. Muscles from each carcass side were randomly assigned to 1) no postmortem processing (NPP), 2) prerigor skeletal separation (SS), 3) moisture enhancement (ME) using calcium ascorbate or 4) a combination of SS and ME (SS/ME). Postmortem processing treatment (PPT) by ageing (PM) interactions (P<0.01) for shear force were present for longissimus. As PM ageing increased from 7 to 21 d, there was a greater decrease (P<0.05) in shear force with NPP vs. all other PPT. Trained taste panellists found SS, ME and SS/ME improved (P<0.05) palatability attributes vs. NPP. An additive effect of combining SS and ME improved palatability traits versus SS or ME alone. Panellists found no differences (P>0.14) in softness and tenderness between SS/ME and Canadian AA or AAA beef. Postmortem processing of beef cows may produce beef as tender and juicy as beef from younger carcasses.

Phenotypic differences in matrix metalloproteinase 2 activity between fibroblasts from 3 bovine muscles.

Different muscles in a beef carcass are known to respond differently to the same stimulus or animal growth pattern or both. This may complicate the search by the meat industry for production methods to render meat tender. One of the major differences between muscles in the same carcass is in the expression of intramuscular connective tissue. Current study investigates the existence of a phenotypic difference among fibroblasts from 3 bovine skeletal muscles as exemplified by the expression of matrix metalloproteinases (MMP) the main enzymes responsible for connective tissue turnover. The sensitivity of phenotypic differences to cell culture conditions (passage number, presence of growth factors from fetal serum) was also examined. Fibroblasts, the main cells responsible for the production and turnover of collagen were isolated from LM, semitendinosus (STN), and sternomandibularis (SMD) muscles from a bull calf and grown in DMEM, 10% fetal bovine serum, and 5% CO(2). Cell doubling times, survival time, resting expression, and activity of MMP and the effect of serum withdrawal in the culture media on MMP expression and activity were determined for each cell line during 15 passages. Fibroblasts isolated from the 3 muscles had different growth potentials. The shortest (P < 0.0001) cell doubling times for almost every passage were found in cells from STN muscle. Cells from the LM had a shorter (P < 0.0001) survival time in comparison with STN and SMD. Cells derived from the STN had greater values (P > 0.05) of MMP-2 activity in comparison with LM and SMD cells until passage 4. At passage 15, no activity was detected for any cell line. Serum withdrawal generally reduced MMP-2 activation but did not eliminate differences in activity between fibroblasts from the 3 muscles. These results suggest that fibroblasts from different locations are phenotypically different and may respond differently to the same growth or nutritional stimulus in vitro. This may be related to in vivo differences in accumulation, maturity, and turnover of collagen, and ultimately meat tenderness. These findings may be important for selecting a management strategy for improving meat tenderness by manipulation of animal growth; a strategy applied to the whole animal may work for some muscles but not for others.

Disparity of dietary effects on collagen characteristics and toughness between two beef muscles.

Manipulation of growth rate and/or diet has been shown to affect protein turnover and may be used to improve beef quality. This trial was conducted to evaluate the effects of average daily gain (ADG) and diet on animal performance, collagen characteristics and beef quality of two different muscles; longissimus dorsi (LD) and semitendinosus (ST). Seventy six Hereford and Angus steers were assigned to three dietary management regimens for finishing: high grain diet based on corn (n=28), alfalfa pasture (n=22) and grass pasture (n=26). Average daily gains were greater (P<0.001) in Herefords vs. Angus and for corn- vs. pasture finished cattle. Overall, total collagen content was greater (P<0.001) and the percentage of total collagen that was heat soluble was lower (P<0.0001) for ST than for LD muscle. The lowest (P<0.05) values for both total and heat soluble collagens were found in animals finished on corn. WBSF values for LD were greater (P<0.01) in grass-fed vs. alfalfa- and grain-finished cattle while there was no difference in WBSF values for ST between grass- and corn-fed animals. No correlation between ADG and WBSF was observed for any muscle. ADG was not correlated with collagen solubility in ST, but was correlated (P<0.05) with collagen solubility in LD. A key finding is that growth rate affected heat soluble collagen in the two muscles to a different extent. In conclusion, this study shows that different feeding strategies may not influence the tenderness of all muscles in a similar way.

Relationships among measures of growth performance and efficiency with carcass traits, visceral organ mass, and pancreatic digestive enzymes in feedlot cattle.

Ninety-three crossbred steer calves (BW+/-SD=385+/-50 kg) were used (n=48 steers in yr 1, n=45 steers in yr 2) to examine the relationship among carcass traits, lean, bone, and fat proportions, visceral tissue weights, and pancreatic digestive enzyme activity with DMI, ADG, G:F, and residual feed intake. Calves were progeny from crossbred dams predominantly of Angus and Simmental breeding and were sired by Angus, Simmental, crossbred (predominantly of Angus and Simmental breeding), Charolais, or Piedmontese bulls. Steers were fed a high-moisture corn-based diet for an average of 112 d. Partial correlation analysis accounting for year, pen within year, week of slaughter within year, and sire breed was conducted. Gain:feed was negatively correlated (P 0.10) between performance measures and the pancreatic proportional content of alpha-amylase and trypsin activity (units/kg of BW). These data indicate that carcass fatness traits and changes in the proportional weight of total viscera may be negatively associated with G:F and that visceral fat weight proportion and trim and kidney fat weight proportion may be important factors influencing this relationship.

Comparison of alternative beef production systems based on forage finishing or grain-forage diets with or without growth promotants: 2. Meat quality, fatty acid composition, and overall palatability.

Five beef cattle management regimens were evaluated for their effect on meat quality, fatty acid composition, and overall palatability of the longis-simus dorsi (LD) muscle in Angus cross steers. A 98-d growing phase was conducted using grass silage with or without supplementation of growth promotants (Revalor G and Rumensin) or soybean meal. Dietary treatments in the finishing phase were developed with or without supplementation of growth promotants based on exclusive feeding of forages with no grain supplementation, or the feeding of grain:forage (70:30) diets. Growth promotants increased (P < 0.01) shear force and tended (P = 0.06) to increase toughness of the LD muscle due to limited postmortem proteolytic activity (lower myofibrillar fragmentation index value; P = 0.02). Grain feeding increased DM and intramuscular fat content (P = 0.03 and P = 0.05, respectively) in the LD but decreased the sensory panel tenderness score (P = 0.01). Growth promotants increased (P

Modelling quality variations in commercial Ontario pork production.

This study explores the interactions of sensory and nutritional environment with genotype occurring in current commercial pork production in Ontario, Canada, which may interact to result in poor quality meat. The study focussed on identifying factors and signalling mechanisms that contribute to poor meat quality, in order to develop strategies to reduce the incidence of unacceptable product quality. In the first phase of the work reported here, animal behaviour and muscle metabolism studies were related to meat colour, tenderness and water-holding capacity measurements from commercially-produced pigs killed in a commercial packing plant. A partial least squares analysis was used to determine the most important of the principal production variables, peri-mortem biochemical measures and post-mortem carcass condition variables studied, in terms of their influence on water-holding, toughness and colour (L*-value). Variations between producer and kill day at the slaughterhouse were very strong contributors to variability in these three meat quality parameters, followed by pH variations. A second phase of the study is currently underway to characterize patterns of gene expression related to extremes of end-product quality and to reduce quality variations by nutritional and behavioural management strategies.

Genetic correlations between live yearling bull and steer carcass traits adjusted to different slaughter end points. 1. Carcass lean percentage.

We studied genetic relationships between age-constant live yearling beef bull growth and ultrasound traits and steer carcass traits with dissected steer carcass lean percentage adjusted to slaughter age-, HCW-, fat depth-, and marbling score-constant end points. Three measures of steer carcass lean percentage were used. Blue Tag lean percentage (BTLean) was predicted from HCW, fat depth, and LM area measurements. Ruler lean percentage (RulerLean) was predicted from carcass fat depth and LM depth and width measurements. Dissected lean percentage (DissLean) was based on dissection of the 10-11-12th rib section. Both BTLean (h2 = 0.30 to 0.44) and DissLean (h2 = 0.34 to 0.39) were more heritable than RulerLean (h2 = 0.05 to 0.14) at all end points. Genetic correlations among DissLean and RulerLean (rg = 0.61 to 0.70), DissLean and BTLean (rg = 0.56 to 0.72), and BTLean and RulerLean (rg = 0.59 to 0.90) indicated that these traits were not genetically identical. Adjusting Diss-Lean to different end points changed the magnitude, but generally not the direction, of genetic correlations with indicator traits. Ultrasound scan-age-constant live yearling bull lean percentage estimates were heritable (h2 = 0.26 to 0.42) and genetically correlated with each other (rg = 0.68 to 0.99) but had greater correlations with DissLean at slaughter age (rg = 0.24 to 0.48) and HCW (rg = 0.16 to 0.40) end points than at fat depth (rg = -0.08 to 0.13) and marbling score (rg = 0.02 to 0.11) end points. Scan-age-constant yearling bull ultrasound fat depth also had stronger correlations with DissLean at slaughter age (rg = -0.34) and HCW (rg = -0.25) than at fat depth (rg = -0.02) and marbling score (rg = -0.03) end points. Yearling bull scan-age-constant ultrasound LM area was positively correlated with DissLean at all endpoints (rg = 0.11 to 0.23). Genetic correlations between yearling bull LM method 1 width (rg = 0.38 to 0.56) and method 2 depth (rg = -0.17 to -0.38) measurements with DissLean suggested that LM shape may be a valuable addition to genetic improvement programs for carcass lean percentage at slaughter age, HCW, and fat depth constant end points. At all end points, steer carcass fat depth (rg = -0.60 to -0.64) and LM area (rg = 0.48 to 0.59) had stronger associations with DissLean than did corresponding live yearling bull measurements. Improved methods that combine live ultrasound and carcass traits would be beneficial for evaluating carcass lean percentage at fat depth or marbling score end points.

Genetic correlations between live yearling bull and steer carcass traits adjusted to different slaughter end points. 2. Carcass fat partitioning.

Partial carcass dissection data from 1,031 finished crossbred beef steers were used to calculate heritabilities and genetic correlations among subcutaneous, intermuscular, and body cavity fat percentage and marbling score adjusted to slaughter age-, HCW-, fat depth-, and marbling score-constant endpoints. Genetic correlations were also calculated among these fat partitions with live growth and ultrasound traits evaluated in yearling beef bulls (n = 2,172) and steer carcass measurements. Heritabilities of the different fat partitions ranged from 0.22 (marbling score-constant body cavity fat) to 0.46 (HCW-constant marbling score). Genetic correlations between subcutaneous fat and intermuscular fat (rg = 0.16 to 0.32) and between intermuscular fat and body cavity fat (rg = 0.38 to 0.50) were more highly associated than subcutaneous fat and body cavity fat (rg = -0.08 to 0.05), indicating that fat depots are not under identical genetic control. Adjusting fat depots to different end points affected the magnitude but usually not the sign of the genetic correlations. Bull postweaning gain was associated with intermuscular (-0.24 to -0.35), body cavity (-0.24 to -0.29), and marbling fat (-0.24 to -0.39) in steers. Bull hip height was associated with body cavity (-0.20 to -0.29) and marbling fat (-0.20 to -0.47) in steers. Bull ultrasound fat depth was associated with subcutaneous (0.11 to 0.29), intermuscular (0.05 to 0.36), body cavity (0.27 to 0.49), and marbling fat (0.27 to 0.73) in steers. Bull ultrasound intramuscular fat percentage was associated with subcutaneous (-0.22 to -0.44) and intermuscular fat (-0.06 to 0.31) in steers. Bull ultrasound LM area was associated with body cavity (-0.25 to -0.31) and marbling fat (-0.25 to -0.30) in steers. Ultrasound LM width measurements were negatively correlated with subcutaneous fat (rg = -0.09 to -0.18), intermuscular fat (rg = -0.53 to -0.61), body cavity fat (rg = -0.63 to -0.69), and marbling score (rg = -0.75 to -0.87) at slaughter age-, HCW-, and fat depth-constant endpoints; correlations were generally lower at a marbling score-constant end point (rg = 0.07 to -0.49). Ultrasound indicator traits measured in seedstock may be useful in altering fat partitioning in commercial beef carcasses.

Association of a single nucleotide polymorphism in the calpastatin gene with carcass and meat quality traits of beef cattle.

Calpastatin (CAST) is a naturally occurring protein that inhibits the normal tenderization of meat as it ages postmortem. A SNP was identified in the CAST gene (a G to C substitution) and genotyped on crossbred commercially fed heifers (n = 163), steers (n = 226), and bulls (n = 61) from beef feedlots, and steers (n = 178) from a University of Guelph feeding trial. The association of the CAST SNP with carcass and meat quality traits was studied. Carcass traits included fat, lean, and bone yield; grade fat; LM area; and HCW. Meat quality traits included marbling grade; i.m. fat content of LM; tenderness evaluation of LM (Warner-Bratzler shear force) at 2, 7, 14, and 21 d of postmortem aging; and tenderness evaluation of semitendinosus muscle at 7 d of postmortem aging. The mixed model used in the analyses included fixed effects of CAST genotype, sex, slaughter group, and breed composition (linear covariate); sire was a random effect. For the analysis of shear force, i.m. fat content of LM was also included in the model as a linear covariate. Shear force measures were analyzed within days of postmortem aging and by repeated measures analysis. The CAST SNP allele C was more frequent (63%) in the crossbred population than allele G. The CAST SNP was associated with shear force across days of postmortem aging (P = 0.005); genotype CC yielded beef that was more tender than GG (-0.32 kg +/- 0.13), and CG had intermediate tenderness. The corresponding average allele substitution effect (G to C substitution) was also highly significant (-0.15 +/- 0.05 kg, P = 0.002). A lower percentage of unacceptably tough steaks (shear force > 5.7 kg) at 2 and 7 d postmortem was associated with an increasing number of C alleles (P < or = 0.05). At 7 d postmortem, the percentage of unacceptably tough steaks decreased by 24 and 35%, respectively, for animals carrying 1 and 2 copies of the C allele relative to animals with no C alleles. However, genotype CC had a greater fat yield (+1.44 +/- 0.56%; P = 0.037) than genotype GG, with a corresponding allele substitution effect of 0.67 +/- 0.27% (P = 0.015). Therefore, the CAST SNP allele C was associated with increased LM tenderness across days of postmortem aging and, importantly for the beef industry, had a significant reduction in the percentage of steaks rated unacceptably tough by consumers based on an assumed threshold level.

Association of single nucleotide polymorphisms in the leptin gene with carcass and meat quality traits of beef cattle.

Studies with different populations are required to properly characterize the robustness of associations of polymorphisms in candidate genes with economically important traits across beef cattle populations before this sort of genetic information can be used efficiently in breeding and management decisions. The objective of this study was to evaluate the association of previously reported SNP in the bovine leptin gene with carcass and meat quality traits from a large sample of crossbred beef cattle. Five SNP (UASMS1, UASMS2, UASMS3, E2JW, and E2FB) were genotyped on 1,111 crossbred bulls, heifers, and steers. The measured traits included fat, lean, and bone yield (%) by partial rib dissection, grade fat, LM area, HCW, quality grade, LM i.m. fat, and tenderness evaluation of LM and semitendinosus muscle. Only four SNP were analyzed (UASMS1, UASMS2, E2JW, and E2FB), because UASMS1 and UASMS3 were completely linked. A uni-variate mixed-inheritance animal model was used to evaluate the association of either genotypes or haplo-types with the traits. The two leptin exon 2 SNP were associated with fat and lean yield and grade fat (E2JW, P < 0.01; E2FB, P < 0.05), and they interacted in their effect on LM tenderness (P < 0.01). The leptin promoter SNP were either not associated with any of the traits (UASMS2) or with fat yield only (UASMS1). Three haplotypes (TCAC, CCAT, TTAC) were at high frequency in the population (88%) and had similar effects on all the traits. Compared with the common haplotypes, one haplotype (CCTT) showed a significantly different effect on fat and lean yield and grade fat (P < 0.01), and one haplotype (TTTT) had a different effect on LM tenderness (P < 0.03). Therefore, important associations between SNP within the leptin gene with lean yield, fatness (fat yield and subcutaneous fat), and tenderness were detected. Results confirm some of the previously reported associations, but diverge with respect to others, showing that further efforts are required to validate some prospective associations.

Breed effects on growth performance, carcass characteristics, fatty acid composition, and palatability attributes in finishing steers.

Crossbred steers (n = 136) were used to assess breed differences in growth performance, carcass characteristics, fatty acid composition (total lipids and phospholipids), and palatability attributes of longissimus muscle. A multiple regression model was applied to crossbreeding data to estimate genetic differences between Simmental and Red Angus at the same level of backfat finish (10 mm). Simmental spent 71 more (P < 0.001) days on feed to acquire the same degree of backfat thickness as Red Angus, had heavier (P < 0.001) slaughter weights, larger (P = 0.002) longissimus muscle area, and increased (P = 0.023) lean yield. Average daily gain did not differ (P = 0.297) between breeds. Simmental were less (P = 0.012) efficient in converting feed to gain than Red Angus. Generally, there were few breed differences in palatability attributes for longissimus and semitendinosus muscles, with the exception of increased (P < 0.05) beef flavor scores for Simmental beef vs Red Angus beef across both muscles. For total lipids, concentrations of myristoleic acid (14:1), palmitoleic acid (16:1), and vaccenic acid (18:1n-7), along with n-6 to n-3 fatty acid (n-6:n-3) ratio, were greater (P < 0.05) in Simmental than Red Angus. In contrast, concentrations of margaric acid (17:0), eicosapentaenoic acid (20:5n-3), and total n-3 polyunsaturated fatty acids (n-3 PUFA) were greater (P < 0.05) in Red Angus than Simmental. For phospholipids, Simmental had lower (P < 0.05) amounts of 20:5n-3, docosahexaenoic acid (22:6n-3), and n-3 PUFA, with a greater (P = 0.017) n-6:n-3 ratio. Activity of delta9-desaturase enzyme in the conversion of palmitic acid (16:0) to 16:1 was greater (P = 0.001) in total lipids from Simmental as compared with Red Angus. A genetic basis for fatty acid differences is suggested, although the biological and practical significance needs to be demonstrated.

Technical note: covariance adjustment in beef cattle research.

In randomized experiments, analysis of covariance is used to increase precision of treatment comparisons. However, for factors that are observational (e.g., breed) or for covariates measured after treatments are applied, it may not be biologically meaningful to calculate treatment means adjusted to a common value of the covariate. For example, in beef cattle trials, it may not be meaningful to compare hot carcass weights of medium- and large-framed breeds adjusted to a common weaning weight because the breeds have naturally different mean weights at weaning. If done, this would typically result in an undesirable downward adjustment of mean carcass weight for the large-framed breed and upward adjustment of the mean carcass weight for the small-framed breed. However, it is desirable to evaluate the mean carcass weight for two diets, adjusted to a common weaning weight. Because of randomization, the expected weaning weights of animals on the two diets are equal and hence the only effect of covariance adjustment is to increase precision of the diet comparison. This paper presents the statistical methodology for estimating covariance adjusted means (termed partially adjusted means) when the levels of some of the factors are compared at a common value of the covariate but the levels of other factors are compared at differing values of the covariate. The methodology is extended to include several covariates, several factors, and arbitrary interactions among covariates, among factors, and between factors and covariates. These methods can be implemented using existing statistical software for linear models. Data are presented from an experiment in which hot carcass weight was recorded for beef cattle. Analyses of these data illustrate that adjusted means, partially adjusted means, and unadjusted means may differ substantially in magnitude, significance, and in the ranking of treatments.

Effects of forage vs grain feeding on carcass characteristics, fatty acid composition, and beef quality in Limousin-cross steers when time on feed is controlled.

Limousin-cross steers (n=135; 258+/-26 kg) were used to compare forage vs grain feeding on carcass composition and palatability attributes of beef when time on feed was controlled. Diets included a 95% alfalfa silage ration (AS) or a 68% high-moisture corn, 25% alfalfa silage ration (HMC). These were incorporated into six treatments to allow comparisons of end points based on similar days on feed or backfat finish. Dietary treatments included 1) HMC (4 mm), or cattle allowed ad libitum intake of HMC until slaughter at 4 mm ultrasound backfat; 2) AS (HMC-4), or cattle allowed ad libitum intake of AS until slaughter, regardless of finish, when HMC (4 mm) cattle were slaughtered; 3) AS (4 mm), or cattle allowed ad libitum intake of AS until slaughter at 4 mm backfat; 4) HMC (AS-4), or cattle allowed ad libitum intake of HMC until slaughter, regardless of finish, when AS (4 mm) cattle achieved 4 mm backfat; 5) HMC (RES), or cattle fed HMC at restricted intakes until slaughter at 4 mm backfat with feed offered at 75% of intake achieved by HMC (4 mm) and HMC (AS-4) cattle; and 6) AS (8 mm) or cattle allowed ad libitum intake of AS ration until slaughter at 8 mm backfat. Grain feeding generally increased (P < .01) ADG, carcass weight, grade fat, and intramuscular fat content when compared with forage feeding at similar times on feed. Palatability attributes of ribeye roasts and ground beef were generally unaffected (P > .10) by diet with the exception of slightly less beef flavor and more off-flavor in forage-fed vs grain-fed beef. Higher (P < .01) concentrations of linolenic acid and lower (P < .10) concentrations of oleic acid in forage-fed beef may be partially responsible for diet differences in flavor.

Effects of fish meal in beef cattle diets on growth performance, carcass characteristics, and fatty acid composition of longissimus muscle.

We investigated the effects of fish meal (FM) in beef cattle diets on growth performance, carcass characteristics, and fatty acid (FA) composition of longissimus muscle in 63 yearling steers (335 +/- 23 kg). High-moisture corn and alfalfa silage diets were supplemented with either a corn gluten/blood meal mixture or FM at 10% of the diet. Fish meal contained (as-is basis) 5.87 g/kg eicosapentaenoic acid (EPA) and 9.84 g/kg docosahexaenoic acid (DHA). Seven strategies were developed to feed either a control diet (no FM) or diets containing 5 or 10% FM with FM fed for either 56, 112, or 168 d before slaughter. Average daily gain and feed efficiency were not affected (P > .10) by FM feeding but DMI decreased. Within FM diets, cattle fed 5% FM consumed more (P < .01) DM and gained more (P < .02) than cattle fed 10% FM. Carcass traits were not affected (P > .05) by feeding strategy except for fatter (P < .05) and lower (P < .06) yielding carcasses in cattle fed 5 vs 10% FM diets. Fish meal feeding increased (P < .01) concentrations of (n-3) FA, including EPA and DHA, and decreased (P < .05) concentrations of arachidonic acid. Increasing the amount of dietary FM further increased (P < .01) concentrations of EPA and DHA and decreased (P < .05) concentrations of (n-6) FA. We estimate that a 114-g steak from cattle fed 10% FM would supply 35 to 90% of the current average daily intake of EPA and DHA in North America. The results indicate that FM may have a role in niche marketing of beef provided that eating quality is not compromised.