Field application of Ca-doped ZnO nanoparticles to maize and wheat plants.

Nanoparticles play a vital role in modern agriculture to provide the nutrients required by plants. Herein, we report the preparation of calcium-doped zinc oxide nanoparticles (CZO NPs) via a simple and cost-effective co-precipitation method, with the aim of realizing increased fertilizer response. The synthesized nanoparticles were analyzed to study their physicochemical properties using various characterization techniques. The X-ray diffraction pattern showed a small shift in peak position towards higher values of 2θ and reduced crystal size after the zinc oxide (ZnO) matrix had been doped with Ca. Field-emission scanning electron microscopy images clearly revealed a grain-like surface morphology. The X-ray photoelectron spectroscopy study produced evidence of Zn2+ substitution by Ca2+ and enhanced Zn-O bond strengths in the CZO samples. Two major crops, maize (Zea mays L.) and wheat (Triticum aestivum L.) were selected to study the impact of the CZO NP-based nanofertilizer on plant growth. During the study, the effect of the CZO-based fertilizer on growth parameters such as seed germination, root and shoot length, plant height, root and stem width, number of leaves, and leaf size was studied based on comparisons with control plants. We observed significantly increased plant growth parameters after the application of the CZO NP-based fertilizers.

One-Pot Facile Synthesis of a Cluster of ZnS Low-Dimensional Nanoparticles for High-Performance Supercapacitor Electrodes.

To maximize the use of ZnS low-dimensional nanoparticles as high-performance supercapacitor electrodes, this work describes a simple one-pot synthesis method for producing a cluster of these particles. The ZnS nanoparticles fabricated in this work exhibit a cluster with unique low-dimensional (0D, 1D, and 2D) characteristics. Structural, morphological, and electrochemical investigations are all part of the thorough characterization of the produced materials. An X-ray diffraction pattern of clustered ZnS nanoparticles reflects the phase formation with highly stable cubic blende sphalerite polymorph. The confirmation of nanoparticle cluster formation featuring multiple low-dimensional nanostructures was achieved through field emission scanning electron microscopy (FE-SEM), while the internal structure was assessed using transmission electron microscopy (TEM). Systematically assessing the ZnS nanoparticles' electrochemical performance reveals their prospective qualities as supercapacitor electrode materials. The electrode assembled with this material on Ni foam demonstrates elevated specific capacitance (areal capacitance) values, reaching 716.8 F.g⁻1 (2150.4 mF.cm-2) at a current density of 3 mA.cm⁻2. Moreover, it reflects 69.1% capacitance retention with a four times increase in current density, i.e., 495.5 F.g-1 (1486.56 mF.cm-2) capacitance was archived at 12 mA.cm-2 with 100% Coulombic efficiency. Furthermore, the electrode exhibits prolonged cycling capability with 77.7% capacitance retention, as evidenced by its charge-discharge measurements sustained over 15,000 cycles at a current density of 25 mA cm⁻2.

WS2 Nanorod as a Remarkable Acetone Sensor for Monitoring Work/Public Places.

Here, we report the synthesis of the WS2 nanorods (NRs) using an eco-friendly and facile hydrothermal method for an acetone-sensing application. This study explores the acetone gas-sensing characteristics of the WS2 nanorod sensor for 5, 10, and 15 ppm concentrations at 25 °C, 50 °C, 75 °C, and 100 °C. The WS2 nanorod sensor shows the highest sensitivity of 94.5% at 100 °C for the 15 ppm acetone concentration. The WS2 nanorod sensor also reveals the outstanding selectivity of acetone compared to other gases, such as ammonia, ethanol, acetaldehyde, methanol, and xylene at 100 °C with a 15 ppm concentration. The estimated selectivity coefficient indicates that the selectivity of the WS2 nanorod acetone sensor is 7.1, 4.5, 3.7, 2.9, and 2.0 times higher than xylene, acetaldehyde, ammonia, methanol, and ethanol, respectively. In addition, the WS2 nanorod sensor also divulges remarkable stability of 98.5% during the 20 days of study. Therefore, it is concluded that the WS2 nanorod can be an excellent nanomaterial for developing acetone sensors for monitoring work/public places.

Synthesis of Mesoporous Silica Adsorbent Modified with Mercapto-Amine Groups for Selective Adsorption of Cu2+ Ion from Aqueous Solution.

In a sol-gel co-condensation, a mesoporous silica hybrid integrated with (3-mercaptopropyl)trimethoxysilane (TMPSH) was prepared and then reacted with allylamine via a post-surface functionalization approach. Approximately 15 mol% of TMSPSH was introduced into the mesoporous silica pore walls along with tetraethyl orthosilicate. The mercapto ligands in the prepared mesoporous silica pore walls were then reacted with allylamine (AM) to form the mercapto-amine-modified mesoporous silica adsorbent (MSH@MA). The MSH@MA NPs demonstrate highly selective adsorption of copper (Cu2+) ions (~190 mg/g) with a fast equilibrium adsorption time (30 min). The prepared adsorbent shows at least a five times more efficient recyclable stability. The MSH@MA NPs adsorbent is useful for selective adsorption of Cu2+ ions.