DTI of Opioid-Exposed Fetuses Using ComBat Harmonization: A Bi-Institutional Study.

BACKGROUND AND PURPOSE: The underlying mechanisms leading to altered cognitive, behavioral, and vision outcomes in children with prenatal opioid exposure are yet to be fully understood. Some studies suggest WM alterations in infants and children with prenatal opioid exposure; however, the time course of WM changes is unknown. We aimed to evaluate differences in diffusion tensor imaging MRI parameters in the brain between opioid exposed fetuses and normal controls. MATERIALS AND METHODS: This is a pilot, prospective cohort study in which subjects in the third trimester of pregnancy underwent fetal DTI of the brain with 20 noncolinear diffusion directions and a b-value of 500 s/mm2 at 2.5-mm isotropic resolution. RESULTS: The study included a total of 26 fetuses, 11 opioid-exposed (mean gestational age, 32.61 [SD, 2.35] weeks) and 15 unexposed controls (mean gestational age, 31.77 [SD, 1.68] weeks). After we adjusted for gestational age, fractional anisotropy values were significantly higher in opioid-exposed fetuses relative to controls in 8 WM tracts: the bilateral lemniscus (left: P = .017; right: P = .020), middle cerebellar peduncle (P = .027), left inferior cerebellar peduncle (P = .026), right sagittal stratum (P = .040), right fornix stria terminalis (P = .022), right inferior fronto-occipital fasciculus (P = .011), and the right uncinate fasciculus (P = .033). Significant alteration was also identified in other DTI indices involving a series of brain regions. CONCLUSIONS: Our data demonstrate initial evidence of cerebral WM microstructural differences between opioid-exposed fetuses and unexposed controls. Further studies in larger patient populations will be needed to fully understand these findings.

The Construction of a Predictive Composite Index for Decision-Making of CSF Diversion Surgery in Pediatric Patients following Prenatal Myelomeningocele Repair.

BACKGROUND AND PURPOSE: There is a wide range of clinical and radiographic factors affecting individual surgeons' ultimate decision for CSF diversion for pediatric patients following prenatal myelomeningocele repair. Our aim was to construct a composite index (CSF diversion surgery index) that integrates conventional clinical measures and neuroimaging biomarkers to predict CSF diversion surgery in these pediatric patients. MATERIALS AND METHODS: This was a secondary retrospective analysis of data from 33 patients with prenatal myelomeningocele repair (including 14 who ultimately required CSF diversion surgery). Potential independent variables, including the Management of Myelomeningocele Study Index (a dichotomized variable based on the shunt-placement criteria from the Management of Myelomeningocele Study), postnatal DTI measures (fractional anisotropy and mean diffusivity in the genu of the corpus callosum and the posterior limb of internal capsule), fronto-occipital horn ratio at the time of DTI, gestational ages, and sex, were evaluated using stepwise logistic regression analysis to identify the most important predictors. RESULTS: The CSF diversion surgery index model showed that the Management of Myelomeningocele Study Index and fractional anisotropy in the genu of the corpus callosum were significant predictors (P < .05) of CSF diversion surgery. The predictive value of the CSF diversion surgery index was also affected by fractional anisotropy in the posterior limb of the internal capsule and sex with marginal effect (.05

.10). The overall CSF diversion surgery index model fit the data well with statistical significance (eg, likelihood ratio: P < .001), with the performance (sensitivity = 78.6%; specificity = 86.5%, overall accuracy = 84.8%) superior to all individual indices in sensitivity and overall accuracy, and most of the individual indices in specificity. CONCLUSIONS: The CSF diversion surgery index model outperformed all single predictor models and, with additional validation, may potentially be developed and incorporated into a sensitive and robust clinical tool to assist clinicians in hydrocephalus management.

A Retrospective Clinical Study on 1075 Lithium Disilicate CAD/CAM Veneers with Feather-Edge Margins Cemented on 105 Patients.

PURPOSE: To evaluate the clinical performance of lithium disilicate (LiDiSi) computer-aided- design/computer-assisted-manufacturing (CAD/CAM) veneers with feather-edge margins. METHODS: Over 4 years (2015-2019), 1075 LiDiSi veneers with feather-edge margins were fabricated with a fully digital workflow and cemented on 105 patients. The outcome variables were survival of the restorations, colour matching, quality of the ceramic surface, presence of marginal discolouration and marginal integrity. The last four variables were assessed using the modified California Dental Association (CDA) and Ryge criteria. RESULTS: The mean observation period was 30.8 months. The cumulative survival rate was 99.83%. At the last follow-up control, the colour matching of the surviving 1074 restorations was rated Alpha (1064 veneers, 99.06%) and Bravo (10 veneers, 0.94%); the ceramic surface was rated Alpha (1070 veneers, 99.62%) and Bravo (4 veneers, 0.38%); the marginal discolouration was rated Alpha (1069 veneers, 99.53%) and Bravo (5 veneers, 0.47%); and the marginal integrity was rated Alpha (1070 veneers, 99.62%) and Bravo (4 veneers, 0.38%). CONCLUSION: CAD/CAM LiDiSi veneers with feather-edge margins fabricated with a fully digital workflow showed good clinical performance in terms of survival, colour matching, ceramic surface, marginal discolouration and integrity. Further, prospective and long-term studies are needed to confirm these positive results.

Continuous Scan Strategy (CSS): A Novel Technique to Improve the Accuracy of Intraoral Digital Impressions.

PURPOSE: To present the results obtained with the "Continuous Scan Strategy" (CSS), a direct intraoral scanning technique based on the connection of the implant scan bodies (SBs) with thermoplastic resin. METHODS: 40 patients were restored with 45 long-span monolithic implant-supported zirconia restorations (10 partial prostheses [PP] and 35 full arches [FA]) fabricated via a full-digital workflow after the capture of an intraoral impression (Trios3®) using the CSS technique. The primary outcomes were the marginal adaptation and passive fit of the superstructures, checked at T0 (intraoral try-in of polyurethane or metal replica of the final prosthesis) and T1 (delivery of the final zirconia restoration). The secondary outcomes, registered at T2 (2 years after the delivery of the final prosthesis), were implant survival, prosthetic success, and complications. A throughout statistical analysis was performed. RESULTS: At T0, 40/45 replicas demonstrated a perfect passive fit and adaptation. At T1, one prosthesis had fractured, and at T2, an additional prosthesis had fractured and one had chipped. The implant survival rate was 100%. The prosthetic success was 93.3%. CONCLUSIONS: CSS seems to represent a viable option for capturing accurate intraoral digital impressions for the fabrication of precise long-span implant-supported restorations.

Accuracy of 6 Desktop 3D Printers in Dentistry: A Comparative In Vitro Study.

PURPOSE: To compare the accuracy of 6 desktop 3D printers in dentistry. METHODS: A parallelepiped (PP) with known geometry and holes of different diameters was designed and printed with 6 desktop 3D printers (Sheraprint 40®; Solflex 350®; Form 2®; MoonRay D75®; Vida HD®; XFAB 2000®). For each printer, 9 PPs were printed with proprietary materials; these PPs were not cured and underwent dimensional analysis by optical microscopy and precision probing. A file representative of a dentate model (DM) was also printed with the aforementioned printers. For each printer, 3 DMs were printed with the proprietary materials. These DMs were cured and after 1 month, scanned with a desktop scanner and superimposed on the virtual reference model, to investigate trueness. RESULTS: Dimensional analysis by optical microscopy and precision probing highlighted the reliability of the 3D printed models; errors were compatible with clinical use. However, both linear and diameter measurements revealed statistically significant differences between the machines. The trueness of the DMs 1 month after printing was low, suggesting that they underwent dimensional contraction over time, albeit with differences between the printers. CONCLUSIONS: The 3D printed models showed acceptable accuracy, although statistically significant differences were found among them.

Practical synthesis of capromorelin, a growth hormone secretagogue, via a crystallization-induced dynamic resolution.

A practical synthesis of capromorelin (1), a growth hormone secretagogue, is described that utilizes as a key step a crystallization-induced dynamic resolution (CIDR) of (±)-3a-benzyl-2-methyl-4,5,6,7-tetrahydro-2H-pyrazolo[4,3-c]pyridin-3(3aH)-one [(±)-2] by L-tartaric acid salt formation, yielding (R)-2.L-tartaric acid in high chemical yield (>85%) and with diastereomeric excess (de) of ∼98%. Treatment of (R)-2.L-tartaric acid with ammonium hydroxide provided (R)-2 without loss of chiral purity. In situ generated (R)-2 was coupled with (R)-3-(benzyloxy)-2-(2-(tert-butoxycarbonyl)-2-methylpropanamido)propanoic acid [(R)-3] to give predominantly a single diastereomer of N-Boc-protected capromorelin [(1R,3aR)-4]. This process was used to prepare bulk quantities of capromorelin from (±)-2 to support preclinical toxicology studies.

Soft Tissue Stability around Single Implants Inserted to Replace Maxillary Lateral Incisors: A 3D Evaluation.

Purpose. To evaluate the soft tissue stability around single implants inserted to replace maxillary lateral incisors, using an innovative 3D method. Methods. We have used reverse-engineering software for the superimposition of 3D surface models of the dentogingival structures, obtained from intraoral scans of the same patients taken at the delivery of the final crown (S1) and 2 years later (S2). The assessment of soft tissues changes was performed via calculation of the Euclidean surface distances between the 3D models, after the superimposition of S2 on S1; colour maps were used for quantification of changes. Results. Twenty patients (8 males, 12 females) were selected, 10 with a failing/nonrestorable lateral incisor (test group: immediate placement in postextraction socket) and 10 with a missing lateral incisor (control group: conventional placement in healed ridge). Each patient received one immediately loaded implant (Anyridge®, Megagen, Gyeongbuk, South Korea). The superimposition of the 3D surface models taken at different times (S2 over S1) revealed a mean (±SD) reduction of 0.057 mm (±0.025) and 0.037 mm (±0.020) for test and control patients, respectively. This difference was not statistically significant (p = 0.069). Conclusions. The superimposition of the 3D surface models revealed an excellent peri-implant soft tissue stability in both groups of patients, with minimal changes registered along time.

Multimodal airway evaluation in growing patients after rapid maxillary expansion.

AIM: The objective of this study was to evaluate the airway volume of growing patients combining a morphological approach using cone beam computed tomography associated with functional data obtained by polysomnography examination after rapid maxillary expansion treatment. STUDY DESIGN: 22 Caucasian patients (mean age 8.3±0.9 years) undergoing rapid maxillary expansion with Haas type expander banded on second deciduous upper molars were enrolled for this prospective study. Cone beam computed tomography scans and polysomnography exams were collected before placing the appliance (T0) and after 12 months (T1). METHODS: Image processing with airway volume computing and analyses of oxygen saturation and apnoea/hypopnoea index were performed. RESULTS: Airway volume, oxygen saturation and apnea/hypopnea index underwent significant increase over time. However, no significant correlation was seen between their increases. CONCLUSION: The rapid maxillary expansion treatment induced significant increases in the total airway volume and respiratory performance. Functional respiratory parameters should be included in studies evaluating the RME treatment effects on the respiratory performance.

Management of cerebral cavernous malformations in the pediatric population: a literature review and case illustrations.

Cavernous malformations (CM) are vascular malformations of the central nervous system that may occur in the brain and spinal cord. They are one of the four major types of vascular malformations that also includes developmental venous anomalies (DVA)s, arteriovenous malformations (AVMs), and capillary telangiectasias. CMs are a common vascular malformation, and 25% of them occur in the pediatric age group. They can present with acute or chronic symptoms including headache, neurologic deficits secondary to hemorrhage, mass effect, or epilepsy. This review will focus on the neurosurgical management of intracranial cavernous malformations in children. Pediatric CMs have special considerations different from CM that occur in the adult population which are highlighted throughout this review. Characteristics specific to pediatric CM epidemiology, genetics, presentation, pathology, location, size, epilepsy, and management will be discussed. Specific considerations must be entertained with the diagnosis of pediatric CM in that management needs to include consideration of the lifetime risk of hemorrhage, as well as the possibility of development of epilepsy. If in an accessible location, most cavernomas should be surgically removed in a timely fashion to provide lifelong cure for pediatric patients. The review closes with the discussion of two interesting cavernous malformation cases occurring in a 12-year old male and a 12-year old female that exhibit many of the important aspects specific to the management of a pediatric patient with CM, highlighting the importance of a multidisciplinary approach to treatment.

Direct metal laser sintering titanium dental implants: a review of the current literature.

Statement of Problem. Direct metal laser sintering (DMLS) is a technology that allows fabrication of complex-shaped objects from powder-based materials, according to a three-dimensional (3D) computer model. With DMLS, it is possible to fabricate titanium dental implants with an inherently porous surface, a key property required of implantation devices. Objective. The aim of this review was to evaluate the evidence for the reliability of DMLS titanium dental implants and their clinical and histologic/histomorphometric outcomes, as well as their mechanical properties. Materials and Methods. Electronic database searches were performed. Inclusion criteria were clinical and radiographic studies, histologic/histomorphometric studies in humans and animals, mechanical evaluations, and in vitro cell culture studies on DMLS titanium implants. Meta-analysis could be performed only for randomized controlled trials (RCTs); to evaluate the methodological quality of observational human studies, the Newcastle-Ottawa scale (NOS) was used. Results. Twenty-seven studies were included in this review. No RCTs were found, and meta-analysis could not be performed. The outcomes of observational human studies were assessed using the NOS: these studies showed medium methodological quality. Conclusions. Several studies have demonstrated the potential for the use of DMLS titanium implants. However, further studies that demonstrate the benefits of DMLS implants over conventional implants are needed.

Thymic hyperplasia in patients with Graves' disease.

BACKGROUND: Graves' disease (GD) is commonly associated with other autoimmune conditions, and there is also a rare but well documented association between GD and thymic hyperplasia (TH). It is hard to say the real frequency of this latter association because most cases remain asymptomatic and are consequently not thoroughly investigated. MATERIALS AND METHODS: We reviewed the literature on GD-related thymus enlargement and found 107 cases published to date. Thymic cancer was only documented in four patients, while the majority of cases were diagnosed as TH. The causative mechanisms behind TH associated with GD have yet to be fully elucidated. Several studies support the hypothesis of a TSH receptor antibody (TRAb) mediating thymic enlargement. RESULTS: We report on a female GD patient with an incidentally discovered anterior mediastinal mass. Our case is not consistent with the hypothesis of a TRAb-mediated mechanism because the thymus reached its largest volume at the onset of GD and shrank during remission of GD under medical treatment, despite persistently positive TRAb levels. CONCLUSION: We support the hypothesis that two different pathogenic mechanisms might be responsible for thymus enlargement: thymic cortical tissue expansion seems to be due to a hyperthyroid state, while lymphoid hyperplasia appears to correlate with immune abnormalities underlying GD.

White matter microstructural abnormality in children with hydrocephalus detected by probabilistic diffusion tractography.

BACKGROUND AND PURPOSE: Hydrocephalus is a severe pathologic condition in which WM damage is a major factor associated with poor outcomes. The goal of the study was to investigate tract-based WM connectivity and DTI measurements in children with hydrocephalus by using the probabilistic diffusion tractography method. MATERIALS AND METHODS: Twelve children with hydrocephalus and 16 age-matched controls were included in the study. Probabilistic diffusion tractography was conducted to generate tract-based connectivity distribution and DTI measures for the genu of the corpus callosum and the connectivity index. Tract-based summary measurements, including the connectivity index and DTI measures (fractional anisotropy, mean diffusivity, axial diffusivity, and radial diffusivity), were calculated and compared between the 2 study groups. RESULTS: Tract-based summary measurement showed a higher percentage of voxels with lower normalized connectivity index values in the WM tracts in children with hydrocephalus. In the genu of the corpus callosum, the left midsegment of the corticospinal tract, and the right midsegment of the corticospinal tract, the normalized connectivity index value in children with hydrocephalus was found to be significantly lower (P < .05, corrected). The tract-based DTI measures showed that the children with hydrocephalus had significantly higher mean diffusivity, axial diffusivity, and radial diffusivity in the genu of the corpus callosum, left midsegment of the corticospinal tract, and right midsegment of corticospinal tract and lower fractional anisotropy in the genu of the corpus callosum (P < .05, corrected). CONCLUSIONS: The analysis of WM connectivity showed that the probabilistic diffusion tractography method is a sensitive tool to detect the decreased continuity in WM tracts that are under the direct influence of mechanical distortion and increased intracranial pressure in hydrocephalus. This voxel-based connectivity method can provide quantitative information complementary to the standard DTI summary measures.

DTI values in key white matter tracts from infancy through adolescence.

BACKGROUND AND PURPOSE: DTI is an advanced neuroimaging technique that allows in vivo quantification of water diffusion properties as surrogate markers of the integrity of WM microstructure. In our study, we investigated normative data from a large number of pediatric and adolescent participants to examine the developmental trends in DTI during this conspicuous WM maturation period. MATERIALS AND METHODS: DTI data in 202 healthy pediatric and adolescent participants were analyzed retrospectively. Fractional anisotropy and mean diffusivity values in the corpus callosum and internal capsule were fitted to an exponential regression model to delineate age-dependent maturational changes across the WM structures. RESULTS: The DTI metrics demonstrated characteristic exponential patterns of progression during development and conspicuous age-dependent changes in the first 36 months, with rostral WM tracts experiencing the highest slope of the exponential function. In contrast, the highest final FA and lowest MD values were detected in the splenium of the corpus callosum and the posterior limb of the internal capsule. CONCLUSIONS: Our analysis shows that the more caudal portions of the corpus callosum and internal capsule begin the maturation process earlier than the rostral regions, but the rostral regions develop at a more accelerated pace, which may suggest that rostral regions rely on development of more caudal brain regions to instigate their development. Our normative DTI can be used as a reference to study normal spatiotemporal developmental profiles in the WM and help identify abnormal WM structures in patient populations.

Custom-made, selective laser sintering (SLS) blade implants as a non-conventional solution for the prosthetic rehabilitation of extremely atrophied posterior mandible.

The treatment of severely atrophied posterior mandibles with standard-diameter root-form implants may present a challenge. Bone reconstructive surgery represents the treatment of choice; however, it may not be accepted by some patients for economic reasons or due to higher morbidity. Computer-aided design/computer-aided manufacturing (CAD/CAM) technologies have recently opened new frontiers in biomedical applications. Selective laser sintering (SLS) is a CAD/CAM technique that allows the fabrication of complex three-dimensional (3D) structures created by computer-generated image-based design techniques. The aim of this study is to present a protocol for the manufacture and clinical use of custom-made SLS titanium blade implants as a non-conventional therapeutic treatment for the prosthetic rehabilitation of extremely atrophied posterior mandibles. Computed tomography datasets of five patients were transferred to a specific reconstruction software, where a 3D projection of the atrophied mandible was obtained, and custom-made endosseous blade implants were designed. The custom-made implants were fabricated with SLS technique, placed in the extremely atrophied posterior (<4 mm width) mandible, and immediately restored with fixed partial restorations. After 2 years of loading, all implants were in function, showing a good esthetic integration. Blade implants can be fabricated on an individual basis as a custom-designed device. This non-conventional approach may represent an option for restoring the atrophied posterior mandible of elderly patients.

Maxillary sinus augmentation using computer-aided design/computer-aided manufacturing (CAD/CAM) technology.

BACKGROUND: Maxillary sinus augmentation is a common method for increasing bone height for insertion of dental implants. In most cases, the graft is manually cut into a roughly appropriate shape by visual estimation during the operation; accordingly, the shape of the graft depends considerably on the experience of the surgeon. We have developed a computer-aided design/computer-aided manufacturing (CAD/CAM) technique to generate custom-made block grafts for sinus augmentation, and a customized cutting guide to precisely position the lateral wall and facilitate membrane elevation, using cone-beam computed tomography (CBCT). METHODS: Custom-made blocks of hydroxyapatite (HA) were preoperatively cut to the required shape, based on a three-dimensional (3D) simulation, using CAD/CAM technology. The custom-made HA blocks were used for sinus augmentation. RESULTS: Five patients underwent bilateral sinus elevation with custom-made HA blocks. Six months later, implants were placed. Two years after placement, all implants were in function. No clinical or prosthetic complications were encountered. CONCLUSIONS: We present a CAD/CAM technique for the fabrication of custom-made block grafts for sinus augmentation.

Diffusion tensor imaging properties and neurobehavioral outcomes in children with hydrocephalus.

BACKGROUND AND PURPOSE: White matter structural alterations and the correlation with neuropsychological deficits in children with hydrocephalus have not been well investigated. In this prospective study, the objectives were the following: 1) to apply DTI to detect in vivo white matter alterations based on diffusion properties in children with acute hydrocephalus, 2) to quantify early neuropsychological deficits, and 3) to explore the correlation between potential neuropsychological deficits and abnormalities in functionally related white matter. MATERIALS AND METHODS: A total of 44 children, 24 with hydrocephalus and 20 controls, were enrolled in the study. DTI indices, FA, MD, AD, and RD, were evaluated in the gCC, sCC, PLIC, and ALIC. The ABAS-II was used as a broad screener of development, including conceptual, social, practical, and motor skills. The correlation between the Motor Scale and DTI indices in the PLIC was analyzed. RESULTS: DTI analyses showed that the gCC and sCC in children with hydrocephalus had lower FA and higher MD, driven by the increased RD with statistical significance (P < .05) or trend-level significance (P = .06). The PLIC and ALIC had significantly higher AD in children with hydrocephalus (P < .05). On the ABAS-II, parent ratings of general adaptive skills, conceptual skills, and motor skills were significantly lower in children with hydrocephalus (all at P < .05). The MD and RD values in the PLIC were found to have trend-level or significant correlation with the Motor Scale (P = .057, .041, respectively). CONCLUSIONS: DTI reveals alterations in the white matter structure in children with hydrocephalus with preliminary findings suggesting correlation with clinical motor deficits.

A novel root analogue dental implant using CT scan and CAD/CAM: selective laser melting technology.

Direct laser metal forming (DLMF) is a new technique which allows solids with complex geometry to be produced by annealing metal powder microparticles in a focused laser beam, according to a computer-generated three-dimensional (3D) model. For dental implants, the fabrication process involves the laser-induced fusion of titanium microparticles, in order to build, layer by layer, the desired object. Modern computed tomography (CT) acquisition and 3D image conversion, combined with the DLMF process, allows the fabrication of custom-made, root-analogue implants (RAI), perfect copies of the radicular units that need replacing. This report demonstrates the successful clinical use of a custom-made, root-analogue DLMF implant. CT images of the residual non-restorable root of a right maxillary premolar were acquired and modified with specific software into a 3D model. From this model, a custom-made, root-analogue, DLMF implant was fabricated. Immediately after tooth extraction, the root-analogue implant was placed in the extraction socket and restored with a single crown. At the 1-year follow-up examination, the custom-made implant showed almost perfect functional and aesthetic integration. The possibility of fabricating custom-made, root-analogue DLMF implants opens new interesting perspectives for immediate placement of dental implants.

Diffusion tensor imaging findings in young children with benign external hydrocephalus differ from the normal population.

PURPOSE: To compare a pediatric population diagnosed with benign external hydrocephalus (BEH) to normal age-matched controls using diffusion tensor imaging (DTI) techniques. METHODS: We retrospectively identified 17 BEH patients by specific clinical and neuroimaging criteria. Fractional anisotropy (FA) and mean diffusivity (MD) values obtained from DTI scans were compared to a population of age-matched controls and group differences were examined by mixed model analysis. A longitudinal comparison was completed on a subset that underwent multiple scans (n = 8). RESULTS: In the genu of the corpus callosum (gCC), six of 15 BEH children had an FA value above the upper limit of 95% prediction interval, nine of 15 BEH children had MD values below the lower limit of 95% prediction interval. A similar trend applied to the other regions of interest (ROIs): splenium of the corpus callosum (sCC), ALIC, and PLIC. Statistical analysis demonstrated significant differences in FA within the gCC, sCC, and PLIC and in MD within the sCC between BEH patients and controls given (P = 0.05). No statistical differences were identified at any ROIs at the later scans. CONCLUSIONS: We found a significant increase in FA and decrease in MD in children with BEH compared with normal children in specific white matter (WM) ROIs, notably in the gCC and sCC; furthermore, in longitudinal comparison, DTI parameters normalized over time. The current study further demonstrates the ability of DTI to distinguish between subtle diffusion changes in periventricular white matter and establishes preliminary objective radiographic parameters for watchful observation of patients with BEH.

Analysis of the pattern of the alveolar ridge remodelling following single tooth extraction.

INTRODUCTION: Tooth extraction is followed by marked osseous changes of the residual alveolar ridge including severe bone alterations both in height and in width. However, such remodelling could jeopardize the subsequent implant insertion for two main reasons. Firstly, the absence of adequate bone levels makes implant placement impossible; secondly, aesthetic problems in the fabrication of implanto-supported restoration could be caused by serious bone re-absorption. Thus, it is of crucial importance that the dental surgeon knows how the alveolar crest changes when a single tooth has been removed. The aim of this study was to evaluate the pattern of alveolar crest remodelling observed in a single intercalated area of tooth extraction after at least a period of 6 months of healing, using standardized photos of model casts. MATERIAL AND METHODS: Among the patients who were treated for a single intercalated tooth extraction during the last 2 years at the department of dentistry at Versilia Hospital, Lido di Camaiore (Lucca), Italy, we selected 50 patients. The amount of alveolar crest remodelling was assessed on standardized photos of study models. All measurement were recorded on an Excel sheet (Excel, Windows XP(®)) and each value was multiplied by the enlargement index so that true values of re-absorption could be obtained. Finally, we have calculated the percentage of amount of alveolar crest remodelling and shifting of alveolar crest. RESULTS: We calculated the percentage of buccal remodelling and alveolar crest shift. The buccal re-absorption was 19.4 ± 9.4% at mesial point, 39.1 ± 10.4% at midpoint and 20.3 ± 10.7% at distal level. Moreover, the shift of the alveolar crest was 59.1 ± 11.2% at mesial point, 64.8 ± 10.5% at the midpoint and 56 ± 12.5% at distal point. CONCLUSIONS: This study confirmed that buccal wall tends to re-absorb after the extraction according to a specific pattern. Thus, the re-absorption at the midpoint represent the double of bone loss at the distal and the mesial points. Furthermore, we have observed first how the alveolar crest shifts placing along the more lingual/palatal line which divides the original alveolar crest into three parts.

Multimodality imaging in the surgical treatment of children with nonlesional epilepsy.

OBJECTIVES: To evaluate the diagnostic value of individual noninvasive presurgical modalities and to study their role in surgical management of nonlesional pediatric epilepsy patients. METHODS: We retrospectively studied 14 children (3-18 years) with nonlesional intractable focal epilepsy. Clinical characteristics, surgical outcome, localizing features on 3 presurgical diagnostic tests (subtraction peri-ictal SPECT coregistered to MRI [SISCOM], statistical parametric mapping [SPM] analysis of [18F] FDG-PET, magnetoencephalography [MEG]), and intracranial EEG (iEEG) were reviewed. The localization of each individual test was determined for lobar location by visual inspection. Concordance of localization between each test and iEEG was scored as follows: 2=lobar concordance; 1=hemispheric concordance; 0=discordance or nonlocalization. Total concordance score in each patient was measured by the summation of concordance scores for all 3 tests. RESULTS: Seven (50%) of 14 patients were seizure-free for at least 12 months after surgery. One (7%) had only rare seizures and 6 (43%) had persistent seizures. MEG (79%, 11/14) and SISCOM (79%, 11/14) showed greater lobar concordance with iEEG than SPM-PET (13%, 3/14) (p<0.05). SPM-PET provided hemispheric lateralization (71%, 10/14) more often than lobar localization. Total concordance score tended to be greater for seizure-free patients (4.7) than for non-seizure-free patients (3.9). CONCLUSIONS: Our data suggest that MEG and SISCOM are better tools for lobar localization than SPM analysis of FDG-PET in children with nonlesional epilepsy. A multimodality approach may improve surgical outcome as well as selection of surgical candidates in patients without MRI abnormalities.