ABSTRACT
BACKGROUND: Impaction bone grafting with large particles is considered as mechanically superior to smaller morsels. Interest of freeze-dried irradiated bone for impaction bone grafting has been observed with small particles. Influence of bone process on other particle sizes still needed to be assessed. MATERIAL AND METHODS: Twenty-four osteoarthrotic femoral heads were used to prepare fresh-frozen and freeze-dried irradiated cancellous bone. Each group was divided into four batches of different particle sizes, each batch containing 18 samples. The different particle sizes were obtained with a Retsch Cross Beater Mill SK 100, Noviomagus rotating bone mills with two sizes of rasps and a Luer bone rongeur. Bone grafts were impacted in a contained cylinder. Stiffness was monitored during impaction. RESULTS: Freeze-dried irradiated grafts showed higher stiffness than fresh-frozen bone whatever the size of the particles. Large particles obtained with the rongeur and the large rasp from the Noviomagus bone mill were mechanically superior than small particles up to 30 impactions. INTERPRETATION: Large particles offer better mechanical performance as a greater magnitude of force would be required to deform and break the particles. Freeze-dried irradiated bone brittleness reduces this advantage after 30 impactions. Large particles embrittlement leads to similar mechanical results as small particles at higher impaction rate. This may account for partial collapse of the graft layer in clinical situation when impaction rate is lower. This model supports the use of small particles obtained with thin rasp bone mill when freeze-dried irradiated bone for impaction bone grafting and large particles obtained with the Rongeur when fresh-frozen bone is available.
Subject(s)
Bone Transplantation/methods , Femur Head/physiology , Femur Head/transplantation , Models, Biological , Tissue and Organ Harvesting/methods , Elastic Modulus/physiology , Femur Head/cytology , Femur Head/radiation effects , Freeze Drying , In Vitro Techniques , Particle Size , Stress, MechanicalABSTRACT
BACKGROUND: The need for safe bone allografts is increasing and preservation of femoral heads from patients being operated on with hip arthroplasty should be encouraged. However, should we preserve femoral heads from patients operated on for neck fracture as tissue mechanical quality may not be satisfactory? MATERIAL AND METHODS: We compared the evolution of stiffness and compactness of fresh-frozen morselized bone obtained from osteoarthrotic femoral heads and those from neck fractures. Both materials were also compared after freeze-drying and irradiation. We used 6 osteoarthrotic and 6 neck-fracture femoral heads to prepare 4 batches of morselized bone. 18 samples from each batch were impacted in a contained cylinder. Frozen bone grafts were tested after thawing at room temperature for 2 hours and freeze-dried grafts were tested after 30 minutes of rehydration. RESULTS: The stiffness of fresh-frozen neck fracture bone was lower than that of fresh-frozen osteoarthrotic bone at 150 impactions. The stiffness of freeze-dried irradiated bone was higher than that of the fresh-frozen bone and did not differ between osteoarthrotic and neck-fracture bone. INTERPRETATION: Solvent-treated freeze-dried bone from femoral heads procured during arthroplasty for sub-capital hip fractures represents a valuable source of material for allografts, addressing concerns regarding serological testing, medical history and bone quality.
