A naphthyl appended ninhydrin based colorimetric chemosensor for Cu2+ ion: Detection of cysteine and ATP.

A ninhydrin-based colorimetric chemosensor (LH) was synthesized using 3-hydroxy-2-naphthoic hydrazide and 11H-indeno[1,2-b]quinoxalin-11-one. It was characterized by spectroscopic and single crystal X-ray diffraction techniques. In a semi-aqueous (MeOH/HEPES) system, LH displayed a characteristic chromogenic change from colorless to yellow upon adding Cu2+ ion, with the appearance of a new peak at λmax = 460 nm. A 1:1 binding stoichiometry between LH and Cu2+ ion has been found, with LOD = 2.3 µM (145 ppb) and LOQ = 8 µM (504 ppb). Based on experimental results the formula of [Cu(L)Cl(H2O)2] (1) was assigned and this in-situ generated 1 was found to exhibit a discoloration of upon gradual addition of cysteine (LOD = 60 nM) as well as ATP (LOD = 130 nM) having 1:2 and 1:1 stoichiometry respectively. The LH was useful for recognition of Cu2+ ion in real water samples and on filter paper strips. A two-input-two-output logic gate circuitry was also constructed by employing 1 and cysteine. The DFT/TDDFT calculations performed on LH and 1 were consistent with experimental findings. The binding affinity of LH towards HSA and BSA were determined with HSA having greater affinity than BSA, which was also supported by theoretical calculations.

Application of 2,4,5-tris(2-pyridyl)imidazole as 'turn-off' fluorescence sensor for Cu(II) and Hg(II) ions and in vitro cell imaging.

The 2,4,5-tris(2-pyridyl)imidazole (L) molecule has been evaluated as a probe for dual sensing of Hg2+ and Cu2+ ions in EtOH/HEPES buffer medium (5 mM, pH = 7.34, 1:1, v/v). Probe L shows a good sensitive and selective turn-off response in the presence of both Hg2+ and Cu2+ ions, which is comprehensible under long UV light. The probe can detect Cu2+ ion in the pH range 3-11 and Hg2+ ion in pH 6-8. The limit of detection for Cu2+ (0.77 µM) is well under the allowable limit prescribed by the United States Environmental Protection Agency. Two metal (Cu2+ /Hg2+ ) ions are needed per L for complete fluorescence quenching. The probe shows marked reversibility on treatment with Na2 EDTA, making the protocol more economical for practical purposes. Paper strip coated with the L solution of EtOH can detect the presence of Cu2+ and Hg2+ ions in the sample using visible quenching of the fluorescence intensity. Density functional theory-time-dependent density functional theory (DFT-TDDFT) calculations support experimental observations, and d-orbitals of Cu2+ /Hg2+ provide a nonradiative decay pathway. Cell imaging study using HDF and MDA-MB-231 cells also supported the viability of L in detecting Cu2+ and Hg2+ ions in living cells.

Ruthenium, osmium and rhodium complexes of 1,4-diaryl 1,4-diazabutadiene: radical versus non-radical states.

Ruthenium, osmium and rhodium complexes of 1,4-di(3-nitrophenyl)-1,4-diazabutadiene (LDAB) of types trans-[RuII(LDAB)(PPh3)2Cl2] (1), trans-[OsII(LDAB)(PPh3)2Br2] (2) and trans-[Rh(LDAB)(PPh3)2Cl2] (3) are isolated and characterized by elemental analyses, IR, mass and 1H NMR spectra including the single crystal X-ray structure determination of 1·2toluene. The α-diimine fragment of the LDAB ligand in 1·2toluene is deformed, showing a relatively longer -C=N- bond, 1.320 Å, and a shorter =CH­CH= bond, 1.395 Å. Density functional theory (DFT) calculations on trans-[Ru(LDAB)(PMe3)2Cl2] (1Me) and trans-[Os(LDAB)(PMe3)2Br2] (2Me) with singlet spin states authenticated that the closed shell singlet state (CSS) solutions of 1 and 2 are stable and no perturbation occurs because of the diradical open shell singlet (OSS) state. The EPR spectra of 3 and the Mulliken spin density distribution obtained from the DFT calculation on trans-[Rh(LDAB)(PMe3)2Cl2] (3Me) imply that the ground electronic state of 3 can be defined by the [RhIII(LDAB˙−)(PPh3)2Cl2] (3RhL˙) ↔ [RhII(LDAB)(PPh3)2Cl2] (3Rh˙L) resonating states. In solid, the contribution of 3RhL˙ is higher and the gav is 2.018 with Δg = 0.10, whereas in frozen glasses the contribution of 3Rh˙L is higher and the gav is 2.026 with Δg (frozen glasses) = 0.13. The g parameters of the electrogenerated [1]+ (g1 = 2.456, g2 = 2.128 and g3 = 1.624, Δg = 0.824), [2]+ (g1 = 2.599, g2 = 2.041 and g3 = 1.965, Δg = 0.634), [1]− (g1 = 2.138, g2 = 2.109, g3 = 1.978 and Δg = 0.160) and [2]− (g1 = 2.168, g2 = 2.097, g3 = 1.987 and Δg = 0.181) ions and the spin density distributions obtained from the DFT calculations on [1Me]+, [2Me]+, [1Me]− and [2Me]− reveal that the reversible anodic peaks of 1 and 2 at 0.11 and 0.34 V, referenced versus Fc+/Fc couple, are due to the M(III)/M(II) redox couple, while the reversible cathodic waves at −1.27 V and −0.82 V of 1 and 2 are caused by the LDAB/LDAB˙− redox couple. Both [MII(LDAB˙−)(PPh3)2Br2]− and [MI(LDAB)(PPh3)2Br2]− tautomers contribute to the ground electronic states of [1]− (g = 2.075) and [2]− (g = 2.084) ions, which are isoelectronic to 3. Time dependent (TD) DFT calculations and spectroelectrochemical measurements elucidated that lower energy absorption bands of 1 and 2 are caused by the metal to ligand charge transfer (MLCT) that disappears upon oxidation or reduction.

16-Methyl-11-(2-methyl-phen-yl)-14-phenyl-8,12-dioxa-14,15-di-aza-tetra-cyclo-[8.7.0.0(2,7).0(13,17)]hepta-deca-2(7),3,5,13(17),15-penta-ene-10-carbo-nitrile.

In the title compound, C28H23N3O2, the pyrazole ring makes a dihedral angle of 16.90 (6)° with the phenyl ring to which it is attached. Both di-hydro-pyran rings exhibit half-chair conformations. Intramolecular C-H⋯O interactions generate S(6) and S(8) ring motifs. In the crystal, weak C-H⋯O and C-H⋯π interactions occur.

Cu(NO3)2.3H2O-mediated synthesis of 4'-(2-pyridyl)-2,2':6',2' '-terpyridine (L2) from N-(2-pyridylmethyl)pyridine-2-methylketimine (L1). A C-C bond-forming reaction and the structure of {[Cu(L2)(OH)(NO3)][Cu(L2)(NO3)2]}.2H2O.

N-(2-Pyridylmethyl)pyridine-2-methylketimine (L1) was synthesized from equimolar quantities of (2-pyridyl)methylamine and 2-acetylpyridine. Methanolic solution of L1 reacted readily with Cu(NO3)2.3H2O in air, affording green solid of composition {[Cu(L2)(OH)(NO3)][Cu(L2)(NO3)2]}.2H2O, where L2 is 4'-(2-pyridyl)-2,2':6',2' '-terpyridine. Oxidation of the active methylene group of L1 to an imide and then condensation with 2-acetylpyridine involving a C-C bond-forming reaction, mediated by a Cu2+ ion, are the essential steps involved in the conversion of L1 to L2. L2 is isolated by extrusion of Cu2+ with EDTA(2-). The copper center in [Cu(L2)(OH)(NO3)] has a mer-N3O3 environment, and that in [Cu(L2)(NO3)2] has a distorted trigonal-bipyramidal geometry. Two H2O molecules held by C-H...O interactions are present in the predominantly hydrophobic channels of approximate cavity dimension 7.60 x 6.50 A created by aromatic rings through pi-pi interactions.