Polarized neutron imaging at NeXT (neutron and x-ray tomograph) at Institut Laue Langevin.

This work describes the implementation of polarized neutron imaging capabilities at the neutron and x-ray tomograph (NeXT) imaging station of the Institut Laue Langevin. This development enhances the capacity of this instrument to study advanced magnetic materials, which are crucial in a variety of engineering applications. Here, the feasibility of polarized neutron imaging at NeXT is demonstrated by visualizing the magnetic field generated by a simple bar magnet. The use of a double-crystal monochromator for wavelength-resolved imaging is also shown to enable both quantitative and qualitative analyses of magnetic materials. This is demonstrated through the determination of magnetization strength in a sample of electric steel (FeSi) in addition to the distribution of its components. Polarimetric imaging is also implemented for the first time to characterize the magnetic field generated by a current-carrying cylindrical wire. These findings collectively underscore the value of incorporating polarized neutron imaging into the already cutting-edge imaging station.

Tensorial neutron tomography of three-dimensional magnetic vector fields in bulk materials.

Knowing the distribution of a magnetic field in bulk materials is important for understanding basic phenomena and developing functional magnetic materials. Microscopic imaging techniques employing X-rays, light, electrons, or scanning probe methods have been used to quantify magnetic fields within planar thin magnetic films in 2D or magnetic vector fields within comparable thin volumes in 3D. Some years ago, neutron imaging has been demonstrated to be a unique tool to detect magnetic fields and magnetic domain structures within bulk materials. Here, we show how arbitrary magnetic vector fields within bulk materials can be visualized and quantified in 3D using a set of nine spin-polarized neutron imaging measurements and a novel tensorial multiplicative algebraic reconstruction technique (TMART). We first verify the method by measuring the known magnetic field of an electric coil and then investigate the unknown trapped magnetic flux within the type-I superconductor lead.

Analysis of the 3D microstructure of experimental cathode films for lithium-ion batteries under increasing compaction.

It is well known that the microstructure of electrodes in lithium-ion batteries has an immense impact on their overall performance. The compaction load during the calendering process mainly determines the resulting morphology of the electrode. Therefore, NCM-based cathode films from uncompacted (0 MPa) to most highly compacted (1000 MPa) were manufactured, which corresponds to global porosities ranging from about 50% to 18%. All samples have been imaged using synchrotron tomography. These image data allow an extensive analysis of the 3D cathode microstructure with respect to increasing compaction. In addition, the numerous microstructural changes can be quantified using several characteristics describing the morphology of cathode samples. Three characteristics, namely global porosity, global volume fraction of active material and mean cathode thickness, are compared to experimental results. In addition, the microstructural analysis by means of 3D image data and image processing techniques allows the investigation of characteristics which are hard or impossible to ascertain by experiments, for example the continuous pore size distribution and the sphericity distribution of NCM-particles. Finally, the dependency of microstructural characteristics on compaction load is described by the help of parametric probability distributions. This approach can be used, for example, to predict the distribution of a certain characteristic for an 'unknown' compaction load, which is a valuable information with regard to the optimization and development process of NCM-cathodes in lithium-ion batteries. LAY DESCRIPTION: It is well known that the microstructure of electrodes in lithium-ion batteries has an immense impact on their overall performance. The manufacturing of the batteries includes the so-called calendering, where the electrodes are compressed with a certain pressure, which is called compaction load. This process step mainly determines the resulting morphology of the electrode and thus the properties of the battery. Therefore, eight cathodes with different compaction loads were manufactured and imaged by synchrotron tomography, which leads to 3D images containing detailed information about the inner structure of the cathode. This image data allows an extensive analysis of the 3D cathode microstructure with respect to increasing compaction. In order to quantify the microstructural changes we use several characteristics describing diverse properties of the morphology. Furthermore, the 3D image data can be used for the computation of characteristics which can not be determined by experiments. Therefore, 3D image data allows us to understand how the microstructure of cathodes is influenced by the compaction load. Finally, we are able to predict the distribution of a certain characteristic for arbitrary compaction loads. This information is valuable with regard to the development of improved lithium-ion batteries.

Floccular fossa size is not a reliable proxy of ecology and behaviour in vertebrates.

The cerebellar floccular and parafloccular lobes are housed in fossae of the periotic region of the skull of different vertebrates. Experimental evidence indicates that the lobes integrate visual and vestibular information and control the vestibulo-ocular reflex, vestibulo-collic reflex, smooth pursuit and gaze holding. Multiple paleoneuroanatomy studies have deduced the behaviour of fossil vertebrates by measuring the floccular fossae (FF). These studies assumed that there are correlations between FF volume and behaviour. However, these assumptions have not been fully tested. Here, we used micro-CT scans of extant mammals (47 species) and birds (59 species) to test six possible morphological-functional associations between FF volume and ecological/behavioural traits of extant animals. Behaviour and ecology do not explain FF volume variability in four out of six variables tested. Two variables with significant results require further empirical testing. Cerebellum plasticity may explain the lack of statistical evidence for the hypotheses tested. Therefore, variation in FF volume seems to be better explained by a combination of factors such as anatomical and phylogenetic evolutionary constraints, and further empirical testing is required.

Multidimensional operando analysis of macroscopic structure evolution in lithium sulfur cells by X-ray radiography.

Lithium sulfur cells are the most promising candidate for the post lithium-ion battery era. Their major drawback is rapid capacity fading attributed to the complex electrochemical processes during charge and discharge which are not known precisely. Here we present for the first time a multidimensional operando measurement by combining X-ray radiography with impedance spectroscopy while galvanostatically charging and discharging a lithium sulfur cell. The formation of macroscopic sulfur crystals at the end of charge can be seen directly by X-ray radiography. These crystals can be assigned to stable α-sulfur (rhombic) and metastable ß-sulfur (monoclinic) by their characteristic crystal habit. These crystal structures with a length of more than 1 mm form and dissolve rapidly during cycling. Their appearance is accompanied by characteristic signals in impedance spectroscopy. Macroscopic crystals of Li2S cannot be observed in full agreement with earlier studies by operando X-ray diffraction. In addition, X-ray radiography reveals non-wetted areas on the carbon cathode. These regions grow during discharge and are reduced during charge. The area of these electrochemically inactive spots is inversely proportional to discharge capacity.

Degradation of Li/S Battery Electrodes On 3D Current Collectors Studied Using X-ray Phase Contrast Tomography.

Lithium/sulphur batteries are promising candidates for future energy storage systems, mainly due to their high potential capacity. However low sulphur utilization and capacity fading hinder practical realizations. In order to improve understanding of the system, we investigate Li/S electrode morphology changes for different ageing steps, using X-ray phase contrast tomography. Thereby we find a strong decrease of sulphur loading after the first cycle, and a constant loading of about 15% of the initial loading afterwards. While cycling, the mean sulphur particle diameters decrease in a qualitatively similar fashion as the discharge capacity fades. The particles spread, migrate into the current collector and accumulate in the upper part again. Simultaneously sulphur particles lose contact area with the conducting network but regain it after ten cycles because their decreasing size results in higher surface areas. Since the capacity still decreases, this regain could be associated with effects such as surface area passivation and increasing charge transfer resistance.

A dedicated compression device for high resolution X-ray tomography of compressed gas diffusion layers.

We present an experimental approach to study the three-dimensional microstructure of gas diffusion layer (GDL) materials under realistic compression conditions. A dedicated compression device was designed that allows for synchrotron-tomographic investigation of circular samples under well-defined compression conditions. The tomographic data provide the experimental basis for stochastic modeling of nonwoven GDL materials. A plain compression tool is used to study the fiber courses in the material at different compression stages. Transport relevant geometrical parameters, such as porosity, pore size, and tortuosity distributions, are exemplarily evaluated for a GDL sample in the uncompressed state and for a compression of 30 vol.%. To mimic the geometry of the flow-field, we employed a compression punch with an integrated channel-rib-profile. It turned out that the GDL material is homogeneously compressed under the ribs, however, much less compressed underneath the channel. GDL fibers extend far into the channel volume where they might interfere with the convective gas transport and the removal of liquid water from the cell.

Neutron guide optimisation for a time-of-flight neutron imaging instrument at the European Spallation Source.

A neutron transport system for the planned imaging instrument ODIN at the future European Spallation Source (ESS) based on neutron optical components was designed and optimized. Different ways of prompt pulse suppression were studied. The spectral performance of the optimal neutron guide configuration is presented. In addition, the influence of the gaps in the guide system needed for the required chopper configuration was investigated. Given that the requirements for an imaging instrument located on a long guide system and hosting a complex chopper system are extremely demanding in terms of spectral and divergence needs, this study can be beneficial for a wide range of instruments in various ways.

Three-dimensional imaging of magnetic domains.

Magnetic domains have been the subject of much scientific investigation since their theoretical existence was first postulated by P.-E. Weiss over a century ago. Up to now, the three-dimensional (3D) domain structure of bulk magnets has never been observed owing to the lack of appropriate experimental methods. Domain analysis in bulk matter thus remains one of the most challenging tasks in research on magnetic materials. All current domain observation methods are limited to studying surface domains or thin magnetic films. As the properties of magnetic materials are strongly affected by their domain structure, the development of a technique capable of investigating the shape, size and distribution of individual domains in three dimensions is of great importance. Here, we show that the novel technique of Talbot-Lau neutron tomography with inverted geometry enables direct imaging of the 3D network of magnetic domains within the bulk of FeSi crystals.

Neutron dark-field tomography.

We report how a grating interferometer yields neutron dark-field scatter images for tomographic investigations. The image contrast is based on ultrasmall-angle scattering. It provides otherwise inaccessible spatially resolved information about the distribution of micrometer and submicrometer sized structural formations. Three complementary sets of tomographic data corresponding to attenuation, differential phase, and small-angle scattering can be obtained from one measurement. The method is compatible with conventional imaging and provides significantly higher efficiency than existing techniques.