"Right now, it's kind of haphazard"-Pediatric emergency care coordinators and quality of emergency care for children: A qualitative study.

Objectives: Pediatric readiness varies widely among emergency departments (EDs). The presence of a pediatric emergency care coordinator (PECC) has been associated with improved pediatric readiness and decreased mortality, but adoption of PECCs has been limited. Our objective was to understand factors associated with PECC implementation in general EDs. Methods: We conducted semistructured qualitative interviews with a purposively sampled set of EDs with and without PECCs. Interviews were completed, transcribed, and coded until thematic saturation was reached. Themes were identified through a consensus process and mapped to the Consolidated Framework for Implementation Research (CFIR). Results: Twenty-four interviews were conducted and mapped to themes related to innovation, individuals and implementation process, outer setting (health system), and inner setting (hospital/ED). Addressing innovation, individuals, and implementation process, the primary theme was variability in how the PECC role was defined and who was responsible for implementing it. Regarding the outer setting, participants reported that limited system resources affected their ability to implement the PECC role. Key inner setting themes included concerns about limited visit volume, a lack of systems for measuring pediatric quality of care, and significant tension around change. Conclusions: Implementation of the PECC role appears to be limited by heterogeneous interpretations of the PECC, de-prioritization of pediatrics, and limited system resources. However, many participants described motivation to improve pediatric care and implement the PECC role in context of increasing pediatric visits; they offered strategies for future implementation efforts.

A load-measuring device can achieve fine-tuning of mediolateral load at knee arthroplasty but may lead to a more lax knee state.

PURPOSE: A balanced knee arthroplasty should optimise survivorship and performance. Equilibration of medial and lateral femorotibial load requires guided judicious pericapsular ligament release. The null hypothesis was that there would be no difference between use of a tensiometer device and a remote load sensor final load transfer across the joint through functional arc of motion. METHODS: A cadaveric study, using eight knees, was performed to define the impact of an established gap distraction device against load sensor-aimed soft tissue release in a TKA setting. Using validated measures of laxity in six degrees of freedom and true real-time load sensing four states were examined: native knee, TKA using spacer blocks (TKA), TKA with soft tissue release aided by a monogram tensiometer (TKA-T) and finally where load across the tibiofemoral articulation remains unbalanced final soft tissue release using a sensor device (TKA-OS). RESULTS: The laxity pattern was equivalent for TKA-T and TKA-OS. However, in only four of these seven knees despite the tensiometer confirming equivalence of rectangular flexion-extension gap dimensions and centralisation of collateral ligament distraction, there remained a > 15lb medial to lateral load difference for at least one point of the flexion arc. This was corrected by further final soft tissue release guided by the OS sensor device in the final three knees. CONCLUSION: Tensiometer-guided soft tissue release at two points of flexion failed to achieve balance for three out of seven knee arthroplasty procedures. Sensor technology guided final soft tissue balancing to equilibrate load across the joint through full arc of motion. This work argues for the role of continuous sensor readings to guide the soft tissue balancing during total knee arthroplasty.

Early shape change behaviour of an uncemented contemporary hip cup: A cadaveric experiment replicating host bone behaviour through temperature control.

Modular uncemented acetabular components are in common use. Fixation is dependent upon press-fit but the forces necessary to achieve initial stability of the construct at implantation may deform the shell and prevent optimal seating of the polyethylene liner insert. Previous work using single-time point measurements in uncontrolled ambient temperature poorly replicates the native state. A controlled study was performed to observe the time-dependent behaviour of an uncemented acetabular shell in the early phase after implantation into the human acetabulum at near physiological temperature. Using a previously validated cadaveric hip model at controlled near physiological temperature with standardised surgical technique, immediate and delayed shell geometry was determined. Eight custom made 3-mm-thick titanium alloy (TiAl6V4) shells were implanted into four cadavers (eight hips). Time-dependent shell deformation was determined using the previously validated ATOS Triple Scan III (ATOS) optical measurement system. The pattern of change in the shape of the surgically implanted shell was measured at three time points after insertion. We found a consistent pattern for quantitative and directional deformation of the shells. In addition, there was consistency for relaxation of the deformation with time. Immediate mean change in shell radius was 104 µm (standard deviation 32, range 67-153) relaxing to mean 96 µm (standard deviation 32, range 63-150) after 10 min and mean 92 µm (standard deviation 28, range 66-138) after 20 min. The clinical significance of this work is the finding of a time-dependent early deformation of acetabular titanium shells on insertion adjusted for near physiological temperature-controlled host bone.

Mechanical properties of cancellous bone from the acetabulum in relation to acetabular shell fixation and compared with the corresponding femoral head.

To gain initial stability for cementless fixation the acetabular components of a total hip replacement are press-fit into the acetabulum. Uneven stiffness of the acetabular bone will result in irregular deformation of the shell which may hinder insertion of the liner or lead to premature loosening. To investigate this, we removed bone cores from the ilium, ischium and pubis within each acetabulum and from selected sites in corresponding femoral heads from four cadavers for mechanical testing in unconfined compression. From a stress-relaxation test over 300 s, the residual stress, its percentage of the initial stress and the stress half-life were calculated. Maximum modulus, yield stress and energy to yield (resilience) were calculated from a load-displacement test. Acetabular bone had a modulus about 10-20%, yield stress about 25% and resilience about 40% of the values for the femoral head. The stress half-life was typically between 2-4 s and the residual stress was about 60% of peak stress in both acetabulum and femur. Pubic bone was mechanically the poorest. These results may explain uneven deformation of press-fit acetabular shells as they are inserted. The measured half-life of stress-relaxation indicates that waiting a few minutes between insertion of the shell and the liner may allow seating of a poorly congruent liner.

Internal femoral component rotation adversely influences load transfer in total knee arthroplasty: a cadaveric navigated study using the Verasense device.

PURPOSE AND HYPOTHESIS: Correct femoral component rotation at knee arthroplasty influences patellar tracking and may determine function at extremes of movement. Additionally, such malrotation may deleteriously influence flexion/extension gap geometry and soft tissue balancing kinematics. Little is known about the effect of subtle rotational change upon load transfer across the tibiofemoral articulation. Our null hypothesis was that femoral component rotation would not influence load across this joint in predictable manner. METHODS: A cadaveric study was performed to examine load transfer using the orthosensor device, respecting laxity patterns in 6° of motion, to examine load across the medial and lateral compartments across a full arc of motion. Mixed-effect modelling allowed for quantification of the effect upon load with internal and external femoral component rotation in relation to a datum in a modern single-radius cruciate-retaining primary knee design. RESULTS: No significant change in maximal laxity was found between different femoral rotational states. Internal rotation of the femoral component resulted in significant increase in medial compartment load transfer for knee flexion including and beyond 60°. External rotation of the femoral component within the limits studied did not influence tibiofemoral load transfer. CONCLUSIONS: Internal rotation of the femoral component will adversely influence medial compartment load transfer and could lead to premature polyethylene wear on the medial side.

Does Maximal External Tibial Component Rotation Influence Tibiofemoral Load Distribution in the Primary Knee Arthroplasty Setting: A Comparison of Neutral vs Maximal Anatomical External Rotatory States.

BACKGROUND: Tibial component rotation at time of knee arthroplasty can influence conformity, load transmission across the polyethylene surface, and perhaps ultimately determined survivorship. Optimal tibial component rotation on the cut surface is reliant on standard per operative manual stressing. This subjective assessment aims to balance constraint and stability of the articulation through a full arc of movement. METHODS: Using a cadaveric model, computer navigation and under defined, previously validated loaded conditions mimicking the in vivo setting, the influence of maximal tibial component external rotation compared with the neutral state was examined for changes in laxity and tibiofemoral continuous load using 3D displacement measurement and an orthosensor continuous load sensor implanted within the polyethylene spacer in a simulated single radius total knee arthroplasty. RESULTS: No significant difference was found throughout arc of motion (0-115 degrees of flexion) for maximal varus and/or valgus or rotatory laxity between the 2 states. The neutral state achieved equivalence for mediolateral load distribution at each point of flexion. We have found that external rotation of the tibial component increased medial compartment load in comparison with the neutral position. Compared with the neutral state, external rotation consistently effected a marginal, but not significant reduction in lateral load under similar loading conditions. The effects were most pronounced in midflexion. CONCLUSION: On the basis of these findings, we would advocate for the midtibial tubercle point to determine tibial component rotation and caution against component external rotation.

Tibiofemoral forces for the native and post-arthroplasty knee: relationship to maximal laxity through a functional arc of motion.

PURPOSE: Accurate soft tissue balance must be achieved to improve functional outcome after total knee arthroplasty (TKA). Sensor-integrated tibial trials have been introduced that allow real-time measurement of tibiofemoral kinematics during TKA. This study examined the interplay between tibiofemoral force and laxity, under defined intraoperative conditions, so as to quantify the kinematic behaviour of the CR femoral single-radius knee. METHODS: TKA was undertaken in eight loaded cadaveric specimens. Computer navigation in combination with sensor data defined laxity and tibiofemoral contact force, respectively, during manual laxity testing. Fixed-effect linear modelling allowed quantification of the effect for flexion angle, direction of movement and TKA implantation upon the knee. RESULTS: An inverse relationship between laxity and contact force was demonstrated. With flexion, laxity increased as contact force decreased under manual stress. Change in laxity was significant beyond 30° for coronal plane laxity and beyond 60° for rotatory laxity (p < 0.01). Rotational stress in mid-flexion demonstrated the greatest mismatch in inter-compartmental forces. Contact point position over the tibial sensor demonstrated paradoxical roll-forward with knee flexion. CONCLUSION: Traditional balancing techniques may not reliably equate to uniform laxity or contact forces across the tibiofemoral joint through a range of flexion and argue for the role of per-operative sensor use to aid final balancing of the knee.

Influence of increasing construct constraint in the presence of posterolateral deficiency at knee replacement: A biomechanical study.

When faced with posterolateral corner (PLC) deficiency, surgeons must choose a total knee replacement (TKR) construct that provides the appropriate level of constraint. This should match the internal constraint of the device to the soft tissue host laxity pattern. Little guidance is available peroperatively, with factors influencing final component choice remaining ill defined. This study aimed to quantify the effect of PLC insufficiency on the "envelope of laxity" (EoL) after TKR and the effect of increasingly component constraint upon knee behavior through a functional arc of flexion. Using computer navigation, mixed effect modeling and loaded cadaveric legs--laxity was quantified under separate states: the native knee, after implantation of a posterior stabilized (PS)-TKR, after sectioning the lateral (fibular) collateral ligament and popliteus tendon (PS-TKR-PLC), and after re-implantation with a semi-constrained "total stabilized" knee replacement (TS-TKR). Laxity was quantified from 0 to 110° of flexion for anterior draw, varus-valgus, and internal-external rotation. Implantation of the PS-TKR was consistently associated with increased constraint when compared to the native knee. PLC sectioning led to significantly increased laxity during varus stress from mid to deep flexion. Revision to a TS-TKR construct restored constraint mimicking that of the primary state but only for the arc of motion 0-90°. In a posterolateral deficient state, a fixed bearing semi-constrained TS-TKR restored the knee to near normal kinematics but this was only achieved from an arc of motion 0-90° of flexion. At higher flexion angles, there remained an unfavorable laxity pattern with varus stress opening.