ABSTRACT
A membrane bioreactor (MBR), fed with domestic wastewater, was bioaugmented with nitrifying biomass selected in a side-stream MBR fed with a synthetic high nitrogen-loaded influent. Microbial communities evolution was monitored and comparatively analysed through an extensive bio-molecular investigation (16S rRNA gene library construction and terminal-restriction fragment length polymorphism techniques) followed by statistical analyses. As expected, a highly specialized nitrifying biomass was selected in the side-stream reactor fed with high-strength ammonia synthetic wastewater. The bioaugmentation process caused an increase of nitrifying bacteria of the genera Nitrosomonas (up to more than 30%) and Nitrobacter in the inoculated MBR reactor. The overall structure of the microbial community changed in the mainstream MBR as a result of bioaugmentation. The effect of bioaugmentation in the shift of the microbial community was also verified through statistical analysis.
Subject(s)
Bacteria/genetics , Bioreactors/microbiology , Microbiota , Nitrification , Nitrogen/metabolism , Bacteria/metabolism , Biomass , DNA, Bacterial/genetics , DNA, Bacterial/metabolism , Molecular Sequence Data , Polymorphism, Restriction Fragment Length , RNA, Ribosomal, 16S/genetics , RNA, Ribosomal, 16S/metabolism , Sequence Analysis, DNAABSTRACT
Bioaugmentation with nitrifiers was studied using two pilot-scale membrane bioreactors, with the purpose of assessing the suitability of state-of-the-art activated sludge models (ASMs) in predicting the efficiency of bioaugmentation as a function of operating conditions. It was demonstrated that the temperature difference between seeding and seeded reactors (ΔT) affects bioaugmentation efficiency. Experimental data were accurately predicted when ΔT was within a range of up to 10 °C at the higher range, and when the temperature was significantly lower in the seeded reactor compared to the seeding one, standard ASMs overestimated the efficiency of bioaugmentation. A modified ASM, capable of accurately representing the behavior of seeded nitrifying biomass in the presence of high ΔT, would require the inclusion of the effect of temperature time gradients on nitrifiers. A simple linear correlation between ΔT and the Arrhenius coefficient was proposed as a preliminary step.
Subject(s)
Ammonia/metabolism , Bacteria/metabolism , Bioreactors , Models, Biological , Sewage/analysis , Waste Disposal, Fluid/methods , In Situ Hybridization, Fluorescence , Models, Theoretical , Nitrification , Pilot Projects , Waste Disposal, Fluid/instrumentationABSTRACT
The potential of several fungi and their synergy with bacterial biomasses were evaluated as a solution for the removal of 2-naphthalensulphonic acid polymers (2-NSAPs) from petrochemical wastewater, characterized by a chemical oxygen demand (COD) greater than 9000â mg/L. The ability of fungi to grow on 2-NSAP mixtures was preliminarily investigated using a solid medium, and then the action of the selected strains, both in suspended and immobilized form, was evaluated in terms of degradation, depolymerization, sorption and an increase in biodegradability of 2-NSAP. Among the 25 fungi evaluated two, in particular, Bjerkandera adusta and Pleurotus ostreatus, have been found to significantly depolymerize 2-NSAP yielding to the corresponding monomer (2-naphthalenesulphonic acid, 2-NSA), which has been further degraded by a bacterial consortia selected in a wastewater treatment plant (WWTP). The fungal treatment alone was able to reduce the COD value up to 44%, while activated sludge removed only 9% of the initial COD. In addition, the combined treatment (fungi and bacteria) allowed an increase in the COD removal up to 62%.
Subject(s)
Bacteria/metabolism , Fungi/metabolism , Microbial Consortia/physiology , Naphthalenesulfonates/metabolism , Water Pollutants, Chemical/metabolism , Water Purification/methods , Biodegradation, Environmental , Feasibility Studies , Naphthalenesulfonates/isolation & purification , Wastewater/microbiology , Water Pollutants, Chemical/isolation & purificationABSTRACT
A pilot scale test on a biotrickling filter packed with polyurethane foam cubes was carried out for 110 d at high volumetric mass load (up to 280 g m(bed)(-3) h(-1)) with the aim of studying the accumulation of solids in the treatment of H(2)S. Removal rate up to 245 g m(bed)(-3) h(-1) was obtained; however, an accumulation of gypsum, elemental sulphur and, above all, inert biomass was identified as the cause of an increased pressure drop over the long term. A mathematical model was applied and calibrated with the experimental results to describe the accumulation of biomass. The model was capable of describing the accumulation of solids and, corresponding to a solids retention time of 50 d, the observed yield resulted in 0.07 g of solids produced g(-1) H(2)S removed. Respirometric tests showed that heterotrophic activity is inhibited at low pH (pH < 2.3), and the contribution to biomass removal through decay was negligible.
