Three-dimensional photon treatment planning of the intact breast.

Three-dimensional treatment planning for the intact breast was performed on two patients who had undergone CT scanning. A total of 38 treatment plans were evaluated. Multiple plans were evaluated for each patient including plans with and without inhomogeneity corrections, plans using varying photon energies of 60Co, 4 MV, 6 MV, 10 MV, and 15 MV, and three-dimensionally unconstrained plans. Increased hot spots were appreciated in the central axis plane when lung inhomogeneity corrections were used. Additional hot spots were appreciated in off-axis planes towards the cephalad and caudad aspects of the target volume because of lung inhomogeneity corrections and changes in the breast contour. The use of 60Co was associated with an increase in the magnitude and volume of hot spots, whereas the use of higher energy photons such as 10 MV and 15 MV was associated with an unacceptable target coverage at shallow depths. Therefore, for the two patients studied, the use of a medium energy photon beam (such as from a 6 MV linear accelerator) appeared to be the energy of choice for treatment of the intact breast. The three-dimensionally unconstrained plans were able to improve slightly upon the standard plans, particularly with relationship of dose to normal tissue structures. Areas for future research were identified, including the use of tissue compensators.

Three-dimensional photon treatment planning for carcinoma of the nasopharynx.

The role of 3-D treatment planning for carcinoma of the nasopharynx was assessed in a four institution study. Two patients were worked up and had an extensive number of CT scans on which target volumes and normal tissues were defined. Treatment planning was then performed using state of the art dose planning systems for these patients to assess the value of the new technology. In general, it was demonstrated that multi-field conformal plans could achieve good tumor dose coverage, while at the same time reducing normal tissue doses, compared to standard treatment planning techniques. The role of inhomogeneity corrections, beam energy, and the use of CT vs. simulation films for defining target volumes were also discussed. In addition, techniques to evaluate 3-D plans for the nasopharynx were considered, and some analysis of this problem is presented in this paper.

Three-dimensional treatment planning for para-aortic node irradiation in patients with cervical cancer.

Three-dimensional treatment planning has been used by four cooperating centers to prepare and analyze multiple treatment plans on two cervix cancer patients. One patient had biopsy-proven and CT-demonstrable metastasis to the para-aortic nodes, while the other was at high risk for metastatic involvement of para-aortic nodes. Volume dose distributions were analyzed, and an attempt was made to define the role of 3-D treatment planning to the para-aortic region, where moderate to high doses (50-66 Gy) are required to sterilize microscopic and gross metastasis. Plans were prepared using the 3-D capabilities for tailoring fields to the target volumes, but using standard field arrangements (3-D standard), and with full utilization of the 3-D capabilities (3-D unconstrained). In some but not all 3-D unconstrained plans, higher doses were delivered to the large nodal volume and to the volume containing gross nodal disease than in plans analyzed but not prepared with full 3-D capability (3-D standard). The small bowel was the major dose limiting organ. Its tolerance would have been exceeded in all plans which prescribed 66 Gy to the gross nodal mass, although some reduction in small bowel near-maximum dose was achieved in the 3-D unconstrained plans. All plans were able to limit doses to other normal organs to tolerance levels or less, with significant reductions seen in doses to spinal cord, kidneys, and large bowel in the 3-D unconstrained plans, as compared to the 3-D standard plans. A high probability of small bowel injury was detected in one of four 3-D standard plans prescribed to receive 50 Gy to the large para-aortic nodal volume; the small bowel dose was reduced to an acceptable level in the corresponding 3-D unconstrained plan. An optimum beam energy for treating this site was not identified, with plans using 4, 6, 10, 15, 18, and 25 MV photons all being equally acceptable. Attempts to deliver moderate or high doses (50-66 Gy) to this region should be made only after careful analysis of the plan with techniques similar to those employed in this study.

Three-dimensional treatment planning considerations for prostate cancer.

Over 300 treatment plans for a total of eight disease sites based on 3-D treatment planning considerations utilizing serial CT delineated target volumes were generated by four institutions as part of an NCI supported contract to both assess the current state-of-the-art capabilities and point directions for future efforts. Two patients with stage C prostate cancer were evaluated with protocol plans which required treatment of the prostate to 70 Gy and the pelvic lymph nodes to 46 Gy. When full 3-D target definition and multiple beam arrangements were employed, all institutions were able to submit plans which scored higher on tumor coverage and had lower normal tissue complication scores compared to traditional plans. The 3-D plans using standard beam arrangements, however, were often rated as highly as the 3-D unconstrained plans due to the multiple beam arrangements already selected to optimize standard plans at most institutions. For this site, heterogeneity corrections, beam energy changes and changes in CT number did not substantially change plan scores.