New Protocol for the Synthesis of S-Thioesters from Benzylic, Allylic and Tertiary Alcohols with Thioacetic Acid.

A new one-pot solvent-less reaction to convert benzylic, allylic, ferrocenyl or tertiary alcohols into S-thioesters, bench-stable and less odorous precursors of the corresponding thiols, which is based on reactions in neat thioacetic acid in the presence of tetrafluoroboric acid, is presented. Reaction monitoring by NMR and GC of the benzyl alcohol conversion indicated the intermediate formation of benzyl acetate and benzyl thionoacetate (PhCH2 OC(S)CH3 ) prior to the slower conversion to the final S-benzyl thioacetate product. Increasing the HBF4 concentration enhanced the reaction rate, giving good to excellent yield (up to 99 %) for a large scope of alcohols. Control experiments, with support of DFT calculations, have revealed a thermodynamically favorable, though requiring HBF4 -activation, disproportionation of CH3 C(O)SH to CH3 C(O)OH and CH3 C(S)SH, the latter immediately decomposing to H2 S and (MeC)4 S6 but also generating the hitherto unreported [MeC(O)C(Me)S]2 (µ-S)2 . Kinetic investigations demonstrated that the rate of benzyl alcohol conversion is second-order in [PhCH2 OH] and second order in [HBF4 ], while the rate of conversion of the benzyl acetate intermediate to S-benzyl thioacetate is second order in [PhCOOMe] and fourth order in [HBF4 ]. The DFT calculations rationalize the need to two alcohol molecules and two protons to generate the reactive benzyl cation.

Acetate ion addition to and exchange in (1,5-cyclooctadiene)rhodium(I) acetate: relevance for the coagulation of carboxylic acid-functionalized shells of core-crosslinked micelle latexes.

The solution behavior of complex [Rh(COD)(µ-OAc)]2 in the absence and presence of PPN+OAc- in dichloromethane has been investigated in detail by multinuclear NMR spectroscopy. Without additional acetate ions, the compound shows dynamic behavior at room temperature, consistent with an inversion of its C2v structure. Addition of PPN+OAc- reveals an equilibrated generation of [Rh(COD)(OAc)2]-. Rapid exchange is observed at room temperature between the neutral dimer and the anionic mononuclear complex, as well as between the anionic complex and free acetate. Lowering the temperature to 213 K freezes the exchange between the two Rh complexes, but fast exchange between the anionic Rh complex and free acetate maintains coalesced Me (1H and 13C) and COO (13C) NMR resonances. DFT calculations support the experimental data and lean in favour of a dissociative mechanism for the acetate exchange in [Rh(COD)(OAc)2]-. The acetate ligands in complex [Rh(COD)(µ-OAc)]2 are also exchanged in a biphasic (water/organic) system with the methacrylic acid (MAA) functions of hydrosoluble [MMA0.5-co-PEOMA0.5]30 copolymer chains (PEOMA = poly(ethylene oxide) methyl ether methacrylate), resulting in transfer of the Rh complex to the aqueous phase. Exchange with the MAA functions in the same polymer equally takes place for the chloride ligands of [Rh(COD)(µ-Cl)]2. The latter phenomenon rationalizes the coagulation of a core-crosslinked micelle (CCM) latex, where MMA functions are present on the hydrophilic CCM shell, when a dichloromethane solution of [Rh(COD)(µ-Cl)]2 is added.

Acetate exchange mechanism on a Zr12 oxo hydroxo cluster: relevance for reshaping Zr-carboxylate coordination adaptable networks.

The kinetics and mechanism of the acetate ligand exchange with free acetic acid in [Zr6O4(OH)4(O2CCH3)12]2, used as a molecular model of crosslink migration in [Zr6O4(OH)4(carboxylate)12-n(OH)n]-based coordination adaptable networks with vitrimer-like properties, has been thoroughly investigated by dynamic 1H NMR and DFT calculations. The compound maintains its C2h-symmetric Zr12 structure in CD2Cl2 and C6D6, while it splits into its Zr6 subunits in CD3OD and D2O. In the Zr12 structure, the topologically different acetates (3 chelating, 6 belt-bridging, 2 intercluster-bridging and 1 inner-face-bridging) of the Zr6 subunits behave differently in the presence of free CH3COOH: very fast exchange for the chelating (coalesced resonance at room temperature), slower exchange for the belt-bridging (line broadening upon warming), no observable exchange up to 65 °C (by EXSY NMR) for the intercluster- and inner-face-bridging. The rates of the first two exchange processes have zero-order dependence on [CH3COOH]. Variable-temperature line broadening studies yielded ΔH‡ = 15.0 ± 0.4 kcal mol-1, ΔS‡ = 8 ± 1 cal mol-1 K-1 (-30 to +25 °C range in CD2Cl2) for the chelating acetates and ΔH‡ = 22.7 ± 1.6, 22.9 ± 2.1 and 20.6 ± 1.0 kcal mol-1 and ΔS‡ = 13 ± 5, 14 ± 6 and 9 ± 3 cal mol-1 K-1, respectively (+25 to +70 °C range in C6D6), for three distinct resonances of magnetically inequivalent belt-bridging acetates. With support of DFT calculations, these results point to an operationally associative mechanism involving a rate-determining partial dissociation to monodentate acetate, followed by rapid acid coordination and proton transfer. The cluster µ3-OH ligands accelerate the exchange processes through H-bonding stabilization of the coordinatively unsaturated intermediate. The lower exchange barrier for the chelated vs. bridging acetates is associated to the release of ring strain. The results presented in this investigation may help the interpretation of carboxylate exchange phenomena in other systems and the design of new carboxylate-based materials.

IrI(η4-diene) precatalyst activation by strong bases: formation of an anionic IrIII tetrahydride.

The reaction between [IrCl(COD)]2 and dppe in a 1 : 2 ratio was investigated in detail under three different conditions. [IrCl(COD)(dppe)], 1, is formed at room temperature in the absence of base. In the presence of a strong base at room temperature, hydride complexes that retain the carbocyclic ligand in the coordination sphere are generated. In isopropanol, 1 is converted into [IrH(1,2,5,6-η2:η2-COD)(dppe)] (2) on addition of KOtBu, with k12 = (1.11 ± 0.02) × 10-4 s-1, followed by reversible isomerisation to [IrH(1-κ-4,5,6-η3-C8H12)(dppe)] (3) with k23 = (3.4 ± 0.2) × 10-4 s-1 and k32 = (1.1 ± 0.3) × 10-5 s-1 to yield an equilibrium 5 : 95 mixture of 2 and 3. However, when no hydride source is present in the strong base (KOtBu in benzene or toluene), the COD ligand in 1 is deprotonated, followed by ß-H elimination of an IrI-C8H11 intermediate, which leads to complex [IrH(1-κ-4,5,6-η3-C8H10)(dppe)] (4) selectively. This is followed by its reversible isomerisation to 5, which features a different relative orientation of the same ligands (k45 = (3.92 ± 0.11) × 10-4 s-1; k5-4 = (1.39 ± 0.12) × 10-4 s-1 in C6D6), to yield an equilibrated 32 : 68 mixture of 4 and 5. DFT calculations assisted in the full rationalization of the selectivity and mechanism of the reactions, yielding thermodynamic (equilibrium) and kinetic (isomerization barriers) parameters in excellent agreement with the experimental values. Finally, in the presence of KOtBu and isopropanol at 80 °C, 1 is transformed selectively to K[IrH4(dppe)] (6), a salt of an anionic tetrahydride complex of IrIII. This product is also selectively generated from 2, 3, 4 and 5 and H2 at room temperature, but only when a strong base is present. These results provide an insight into the catalytic action of [IrCl(COD)(LL)] complexes in the hydrogenation of polar substrates in the presence of a base.

Catalyst-Free Thia-Michael Addition to α-Trifluoromethylacrylates for 3D Network Synthesis.

Thia-Michael additions (1,4-additions of a thiol to a Michael acceptor) are generally catalyzed by an external Brønsted or Lewis base. A spontaneous (uncatalyzed) Michael addition of thiols to α-trifluoromethyl acrylates is described, as well as its application to the very efficient preparation of a thermoset. A thorough mechanistic investigation, based on an experimental kinetic study and on DFT calculations, is presented for the addition of arene- and alkanethiols to tert-butyl trifluoromethyl acrylate in polar aprotic solvents, unveiling a probable solvent-assisted proton transfer in the rate-determining step and a considerable lowering of the energy barrier induced by the CF3 group.

Phosphine-Functionalized Core-Crosslinked Micelles and Nanogels with an Anionic Poly(styrenesulfonate) Shell: Synthesis, Rhodium(I) Coordination and Aqueous Biphasic Hydrogenation Catalysis.

Stable latexes containing unimolecular amphiphilic core-shell star-block polymers with a triphenylphosphine(TPP)-functionalized hydrophobic core and an outer hydrophilic shell based on anionic styrenesulfonate monomers have been synthesized in a convergent three-step strategy by reversible addition-fragmentation chain-transfer (RAFT) polymerization, loaded with [RhCl(COD)]2 and applied to the aqueous biphasic hydrogenation of styrene. When the outer shell contains sodium styrenesulfonate homopolymer blocks, treatment with a toluene solution of [RhCl(COD)]2 led to undesired polymer coagulation. Investigation of the interactions of [RhCl(COD)]2 and [RhCl(COD)(PPh3)] with smaller structural models of the polymer shell functions, namely sodium p-toluenesulfonate, sodium styrenesulfonate, and a poly(sodium styrenesulfonate) homopolymer in a biphasic toluene/water medium points to the presence of equilibrated Rh-sulfonate interactions as the cause of coagulation by inter-particle cross-linking. Modification of the hydrophilic shell to a statistical copolymer of sodium styrenesulfonate and poly(ethylene oxide) methyl ether methacrylate (PEOMA) in a 20:80 ratio allowed particle loading with the generation of core-anchored [RhCl(COD)TPP] complexes. These Rh-loaded latexes efficiently catalyze the aqueous biphasic hydrogenation of neat styrene as a benchmark reaction. The catalytic phase could be recovered and recycled, although the performances in terms of catalyst leaching and activity evolution during recycles are inferior to those of equivalent nanoreactors based on neutral or polycationic outer shells.

Coordination Adaptable Networks: Zirconium(IV) Carboxylates.

Vitrimers are 3D "covalent adaptable networks" (CANs) with flow properties thanks to thermally activated associative exchange reactions. This contribution introduces coordination adaptable networks, or CooANs, that are topologically related to metal-organic frameworks with octahedral Zr6 clusters as secondary building units in a carboxylic acid-functionalized acrylate-methacrylate copolymer matrix. A series of Zr-CooAN-x materials (x=percent of Zr6 loading relative to maximum capacity) was synthesized with x=5, 10, 15, 20, 25, 50 and 100. The mechanical and rheological investigations demonstrate vitrimer-like properties for x up to 50, the crosslink migration being ensured by carboxylate ligand exchange, with relaxation becoming slower as the Zr6 content is increased. The flow activation energy of Zr-CooAN-10 is 92.9±3.6 kJ mol-1 . Rapid (30 min) hot-press reshaping occurs at temperatures in the 50-100 °C range under a 3-ton pressure and does not significantly alter the material properties.

Synthesis and crystal structure of [(Sp )-(2-phenyl-ferrocen-yl)meth-yl]tri-methyl-ammonium iodide di-chloro-methane monosolvate.

As a follow-up to our research on the chemistry of disubstituted ferrocene derivatives, the synthesis and the structure of the title compound, [Fe(C5H5)(C15H19N)]I·CH2Cl2, is described. The cation mol-ecule is built up from a ferrocene disubstituted by a tri-methyl-ammonium methyl group and a phenyl ring. The asymmetric unit contains the iodide to equilibrate the charge and a disordered di-chloro-methane solvate. The disordered model results from a roughly statistical exchange (0.6/0.4) between one Cl and one H. The packing of the structure is stabilized by weak C-H⋯X (X = I, Cl), C-H⋯π(Cp) and C-Cl⋯π(phen-yl) inter-actions, building a three-dimensional network. The cation has planar chirality with Sp (Fc) absolute configuration. The structure of the title compound is compared with related disubstituted (tri-meth-ylammonio)-methyl ferrocenes.

Synthesis and crystallographic studies of 2-(di-phenyl-phosphino-thio-yl)-2-(3-oxobut-1-en-yl)ferrocene.

As a follow-up to our research on the chemistry of disubstituted ferrocene derivatives, the synthesis and the structure of the title compound, 2-(di-phenyl-phosphino-thio-yl)-2-(3-oxobut-1-en-yl)ferrocene, [Fe(C5H5)(C21H18OPS)], are described. The mol-ecule is built up from a ferrocene unit disubstituted by an S-protected di-phenyl-phosphine group and by a methyl-vinyl-ketone chain. The crystal structure features weak C-H⋯O and C-H⋯S inter-actions, which build a two-dimensional network. This structure is compared to that of the related disubstituted di-phenyl-phosphino ferrocene.

Rhodium nanoparticles inside well-defined unimolecular amphiphilic polymeric nanoreactors: synthesis and biphasic hydrogenation catalysis.

Rhodium nanoparticles (Rh NPs) embedded in different amphiphilic core-crosslinked micelle (CCM) latexes (RhNP@CCM) have been synthesized by [RhCl(COD)(TPP@CCM)] reduction with H2 (TPP@CCM = core-anchored triphenylphosphine). The reduction rate depends on temperature, on the presence of base (NEt3) and on the P/Rh ratio. For CCMs with outer shells made of neutral P(MAA-co-PEOMA) copolymer chains (RhNP@CCM-N), the core-generated Rh NPs tend to migrate toward the hydrophilic shell and to agglomerate depending on the P/Rh ratio and core TPP density, whereas the MAA protonation state has a negligible effect. Conversely, CCMs with outer shells made of polycationic P(4VPMe+I-) chains (RhNP@CCM-C) maintain core-confined and well dispersed Rh NPs. All RhNP@CCMs were used as catalytic nanoreactors under aqueous biphasic conditions for acetophenone, styrene and 1-octene hydrogenation. Styrene was efficiently hydrogenated by all systems with high selectivity for vinyl reduction. For acetophenone, competition between benzene ring and carbonyl reduction was observed as well as a limited access to the catalytic sites when using CCM-C. Neat 1-octene was also converted, but the activity increased when the substrate was diluted in 1-nonanol, which is a better core-swelling solvent. Whereas the molecular RhI center was more active than the Rh0 NPs in 1-octene hydrogenation, the opposite trend was observed for styrene hydrogenation. Although Rh NP migration and agglomeration occurred for RhNP@CCM-N, even at high P/Rh, the NPs remained core-confined for RhNP@CCM-C, but only when toluene rather than diethyl ether was used for product extraction before recycling.

Triphenylphosphine-Functionalized Core-Cross-Linked Micelles and Nanogels with a Polycationic Outer Shell: Synthesis and Application in Rhodium-Catalyzed Biphasic Hydrogenations.

Unimolecular amphiphilic nanoreactors with a poly(4-vinyl-N-methylpyridinium iodide) (P4VPMe+ I- ) polycationic outer shell and two different architectures (core-cross-linked micelles, CCM, and nanogels, NG), with narrow size distributions around 130-150 nm in diameter, were synthesized by RAFT polymerization from an R0 -4VPMe+ I- 140 -b-S50 -SC(S)SPr macroRAFT agent by either chain extension with a long (300 monomer units) hydrophobic polystyrene-based block followed by cross-linking with diethylene glycol dimethacrylate (DEGDMA) for the CCM particles, or by simultaneous chain extension and cross-linking for the NG particles. A core-anchored triphenylphosphine (TPP) ligand functionality was introduced by using 4-diphenylphosphinostyrene (DPPS) as a comonomer (5-20 % mol mol-1 ) in the chain extension (for CCM) or chain extension/cross-linking (for NG) step. The products were directly obtained as stable colloidal dispersions in water (latexes). After loading with [RhCl(COD)]2 to yield [RhCl(COD)(TPP@CCM)] or [RhCl(COD)(TPP@NG)], respectively, the polymers were used as polymeric nanoreactors in Rh-catalyzed aqueous biphasic hydrogenation of the model substrates styrene and 1-octene, either neat (for styrene) or in an organic solvent (toluene or 1-nonanol). All hydrogenations were rapid (TOF up to 300 h-1 ) at 25 °C and 20 bar of H2 pressure, the biphasic mixture rapidly decanted at the end of the reaction (<2 min), the Rh loss was negligible (<0.1 ppm in the recovered organic phase), and the catalyst phase could be recycled 10 times without significant loss of catalytic activity.

A new P,S-coordinating ferrocenyl ligand: synthesis of a precursor and its coordination compounds with PdII and PtII. Corrigendum.

In the paper by Mouas Toma et al. [Acta Cryst. (2014), C70, 460-464], there was an error in the name of the first author.

Erratum: rac-{[2-(Diphenyl-thio-phosphor-yl)ferrocen-yl]meth-yl}dimethyl-ammonium diphenyl-dithio-phosphinate. Corrigendum.

[This corrects the article DOI: 10.1107/S1600536812009129.].

Synthesis of Nixantphos Core-Functionalized Amphiphilic Nanoreactors and Application to Rhodium-Catalyzed Aqueous Biphasic 1-Octene Hydroformylation.

A latex of amphiphilic star polymer particles, functionalized in the hydrophobic core with nixantphos and containing P(MAA-co-PEOMA) linear chains in the hydrophilic shell (nixantphos-functionalized core-crosslinked micelles, or nixantphos@CCM), has been prepared in a one-pot three-step convergent synthesis using reversible addition-fragmentation chain transfer (RAFT) polymerization in water. The synthesis involves polymerization-induced self-assembly (PISA) in the second step and chain crosslinking with di(ethylene glycol) dimethacrylate (DEGDMA) in the final step. The core consists of a functionalized polystyrene, obtained by incorporation of a new nixantphos-functionalized styrene monomer (nixantphos-styrene), which is limited to 1 mol%. The nixantphos-styrene monomer was synthesized in one step by nucleophilic substitution of the chloride of 4-chloromethylstyrene by deprotonated nixantphos in DMF at 60 °C, without interference of either phosphine attack or self-induced styrene polymerization. The polymer particles, after loading with the [Rh(acac)(CO)2] precatalyst to yield Rh-nixantphos@CCM, function as catalytic nanoreactors under aqueous biphasic conditions for the hydroformylation of 1-octene to yield n-nonanal selectively, with no significant amounts of the branched product 2-methyl-octanal.

Synthesis, characterization and antiparasitic activity of organometallic derivatives of the anthelmintic drug albendazole.

Helminthiases, a group of neglected tropical diseases, affect more than one billion people mainly in tropical and subtropical regions. Moreover, major intestinal protozoa have a significant impact on global public health. Albendazole (ABZ) is a broad-spectrum anthelmintic recommended by the World Health Organisation (WHO). However, drug resistance is emerging due to its widespread use. In order to tackle this problem, taking into account the spectacular results obtained with ferroquine, an organometallic derivatization of the antimalarial drug chloroquine, we have prepared, in this study, a series of new ferrocenyl and ruthenocenyl derivatives of the organic drug ABZ and assessed their activity against different helminths and protozoans, namely Trichuris muris, Heligmosomoides polygygrus, Schistosoma mansoni, Giardia lamblia, Haemonchus contortus and Toxoplasma gondii. The ferrocene-containing ABZ analogue 2d exhibited over 70% activity against T. muris adults in vitro at 200 µM and no toxicity to mammalian cells (IC50 >100 µM). H. polygyrus adults were not affected by any of the derivatives tested. Against T. gondii, the ferrocene-containing ABZ analogues 1a and 2d showed better in vitro activity than ABZ and low toxicity to the host cells. The activity of the analogous ruthenocenyl compound 2b against S. mansoni and T. gondii in vitro might be attributed to its toxicity towards the host cells rather than a specific antiparasitic activity. These results demonstrate that the derivatives show a species specific in vitro activity and the choice of the organometallic moieties attached to the organic drug is playing a very important role. Two of our organometallic compounds, namely 1b and 2d, were tested in T. muris infected mice. At a 400 mg kg-1 dose, the compounds showed moderate worm burden reductions but low worm expulsion rates. Overall, this work, which is one of the first studies reporting the potential of organometallic compounds on a very broad range of parasitic helminths and protozoan, is a clear confirmation of the potential of organometallic complexes against parasites of medical and veterinary importance.

Ferrocenyl Phosphorhydrazone Dendrimers Synthesis, and Electrochemical and Catalytic Properties.

The discovery of ferrocene is often associated with the rapid growth of organometallic chemistry. Dendrimers are highly branched macromolecules that can be functionalized at will at all levels of their structure. The functionalization of dendrimers with ferrocene derivatives can be carried out easily as terminal functions on the surface, but also at the core, or at one or several layers inside the structure. This review will focus on phosphorhydrazone dendrimers functionalized with ferrocene derivatives, on the surface, at the core, at all layers or within a single layer inside the structure. The first part will describe the synthesis; the second part will concern the electrochemical properties; and the last part will give several examples concerning catalysis, with complexes of ferrocenyl phosphines used as terminal functions of dendrimers.

Synthesis of S-Alkyl Phosphinocarbodithioates with Switch between P(III) and P(V) Derivatives.

Simple and effective synthetic pathways are described to prepare compounds R2P(X)C(S)SCH(Me)Ph with the P atom either in the oxidation state V [R/X = t-Bu/O (6), Ph/S, (7), t-Bu/S (8), t-Bu/Se (9)] or III [R/X = Ph/BH3 (4), t-Bu/BH3 (5), t-Bu/lone pair (10)]. Compound 9 is the first example of carbodithioate ester with a P = Se group, and for the first time, a phosphinocarboditioate with a free phosphine function (compound 10) is described. Stabilization of the latter crucially depends on the steric protection by the t-Bu groups since an analogous derivative with R = Ph is observable but too unstable for isolation. Compound 10 can be reversibly protonated to yield the [t-Bu2PHC(S)SCH(Me)Ph]+ cation (10-H+), which was isolated as a BF4- salt. A few interconversion processes resulting in the facile addition/removal or exchange of the X group in this family of compounds are also described. The oxidation state of the phosphorus atom and the nature of an electron-withdrawing group have a significant impact on the spectral properties.

α-Alkylation of Ketones with Secondary Alcohols Catalyzed by Well-Defined Cp*CoIII -Complexes.

Although α-alkylation of ketones with primary alcohols by transition-metal catalysis is well-known, the same process with secondary alcohols is arduous and complicated by self-condensation. Herein a well-defined, high-valence cobalt(III)-catalyst was applied for successful α-alkylation of ketones with secondary alcohols. A wide-variety of secondary alcohols, which include cyclic, acyclic, symmetrical, and unsymmetrical compounds, was employed as alkylating agents to produce ß-alkyl aryl ketones.

The crystal structure of a new ferrocenyl P,N ligand: 1-[(2,2-di-methyl-hydrazin-1-yl-idene)meth-yl]-1'-(di-phenyl-phospho-rothio-yl)ferrocene.

The asymmetric unit of the title compound, [Fe(C8H11N2)(C17H14PS)], contains two independent mol-ecules (A and B) with very similar conformations. Each mol-ecule is built up from a ferrocene unit substituted in the 1 and 1' positions by a protected sulfur di-phenyl-phosphine and by a di-methyl-hydrazine, -C(H)=N-N(CH3)2, fragment. The two independent mol-ecules are linked by a C-H⋯N hydrogen bond. In the crystal, the A-B dimer is linked by a pair of C-H⋯S hydrogen bonds, forming a centrosymmetric four-mol-ecule arrangement. These units are linked by C-H⋯π inter-actions, forming a supra-molecular three-dimensional structure.

Synthesis of an Enantiomerically Pure Inherently Chiral Calix[4]Arene Phosphonic Acid and Its Evaluation as an Organocatalyst.

A facile method for the preparation of enantiomerically pure inherently chiral calix[4]arene phosphonic acid (cR,pR)-7 in four steps starting from the readily available and previously synthesized (cS)-enantiomer of calix[4]arene acetic acid 1 or its methyl ester 2 was developed. The first tests of this unique calixarene Brönsted acid with inherent chirality in organocatalysis of the aza-Diels-Alder reaction of imines with Danishefsky's diene and epoxide ring opening by benzoic acid were performed. The calixarene phosphonic acid (cR,pR)-7 shows good catalytic activities but with low enantioselectivities in these reactions.